MiSTer FPGA Forum

If you have concerns just test each SDRAM stick individually using the MemTest core, in the Utility folder. You will physically need to swap the sticks over onto the primary 40 pin header.

The purpose of the thread is for official significant project updates from (https://github.com/mister-devel). Other developers for example Jotego, have a dedicated Patreon when they post their project development news. The intention of the thread is not to be the definitive source of all information for every single individual project currently bei...

Forum members who posted have been messaged and brought up to speed on the purpose of the thread, and said erroneous posts removed, overall it really is a very infrequent occurrence.

Capacitors will not make a huge difference if your having hard crashes in cores, run the memtest core on each individual chip on the SDRAM board, my guess is one will be faulty.

10V rated capacitors will be fine.

Yes it is fine.

The core's framework needs to be updated to support the new I/O board.

pedroTFP wrote: ↑Fri Sep 13, 2024 2:21 pm
Does this board allow DUAL RAM + dual video output (24bit analogue to 15khz CRT + 1440p HDMI)?

No it does not.

curious-beacon wrote: ↑Sat Apr 20, 2024 7:52 am
Is this core coming back someday for free?

You can get an updated version with a number of bugs fixed by Paulb-nl.

https://misterfpga.co.uk/teenage-mutant ... ster-fpga/

Developer's Ko-Fi and Twitter are linked below for any who wish to follow or support them with a donation:

https://ko-fi.com/solalretrogaming

https://twitter.com/s_on_vg

ADV7842 wrote: ↑Sun Mar 31, 2024 8:06 am
Can a Noctua 5V Fan reduced to 3.3V or doesn't it turn on?

Yes, the 5 Volt Noctua starts and spins fine on 3.3 Volts.

From the pictures either type will work they are just open and closed tops for the jumper/shunt, that is the only difference.

See here for the way to fix MT32-Pi image for use with the new hardware revision of the Raspberry Pi 3 A+

viewtopic.php?t=7427

The post focuses on limitations with the built in DDR3 memory on the DE10-Nano board. Despite efforts to address latency issues, he has found no satisfying solution due to the hardware limitations. Robert also announced he is taking a break of around two weeks to recuperate from a busy year of core development, but has plans to integrate the Ninten...

Robert has posted to his Patreon about the reaching the end of the N64 development.

If you are already or wish to become a Patreon you can read the post directly here:

https://www.patreon.com/posts/n64-core-ends-100278345

Looks like the MiSTer NFC project by Wizzo has been covered by the Verge, Awesome :D How to modernize your retro game collection in a few convoluted steps All you need are NFC stickers, a reader, a MiSTer, and a lot of patience to add a physical touch to ROMs. See the full article here: https://www.theverge.com/24072166/retro-classic-game-roms-nfc-...

A general-purpose tool for streaming your Windows PC screen to your MiSTer through the Groovy_MiSTer core.

Project GitHub:
https://github.com/iequalshane/MiSTerCast

Release:
https://github.com/iequalshane/MiSTerCast/releases

What speed does the RAM actually run at? Is that core dependent? Is there a place to set max RAM speed? Down clocking is a normal operation with the SDRAM test core this is how the SDRAM test core can ascertain the highest stable MHz frequency the memory performs at. The MHz speed requirement varies per core, see here: https://github.com/MiSTer-de...

Based upon your test data your memory is working. The last row of your test results are the number of fails, all test are all showing zero fails. You certainly don't need to test for any longer than an hour. Remember the Saturn core is still very much a work in progress see here for the recent changes: https://github.com/MiSTer-devel/Saturn_MiSTer/...

The memory is connected via a 40 pin header on the DE10-Nano, the SDRAM memory module will move as in rock backwards and forwards, as it is not connected like PC DDR memory. I recommend you remove the SDRAM module and reseat a few times it on the 40 pin header as it may well just be a poor contact with one of the forked pins inside the SDRAM connec...

hardwired wrote: ↑Thu Jan 18, 2024 4:58 pm
I don't know how long it's supposed to run. If an hour isn't enough.

The SDRAM test core has no end it will run for as long as you leave it, however an hour is plenty for testing purposes.

Post a screen capture of the memory test core after runnning for half an hour into the thread.

What happens to the wavy image if you adjust the Horiz Hold / Vert Hold pots on the CRT's chassis?

Update_all runs the MiSTer Downloader script, see GitHub for information on how to customise it for your own use case:

https://github.com/MiSTer-devel/Downloader_MiSTer/

https://github.com/MiSTer-devel/Downloa ... filters.md

Agreed, slow down on the original hardware is normal with this title.

I have pruned some posts from this thread to keep this on topic, thanks.

Current tested games list from Jotego's GitHub:

https://github.com/jotego/jtbin/wiki/NeoGeo-Pocket-Core

Jotego's Patreon:

https://patreon.com/jotego

arbitrate wrote: ↑Wed Jan 03, 2024 1:43 am
Its been a while since Ive seen any sort of update from srg320. Anyone know if he is okay?

He was on this forum on Wed Jan 03, 2024.

Changed as per your request.

I suggest reporting here if others can confirm the issue.

https://github.com/MiSTer-devel/Arcade- ... Ter/issues

I would contact the manufacturer for support, I think it is possibly a hardware issue with the clock chip on the board.

Your original Micro SD card build was probably using using this script:

viewtopic.php?t=4511

MiSTer FPGA Forum

Search found 473 matches

Re: Dual RAM Testing?

Re: Ban all but Core Developers from news Post thread

Re: Ban all but Core Developers from news Post thread

Re: 128MB SDRAM v3.0 unstable

Re: MEAN WELL GST25E05-P1J , is it ok?

Re: Raizing core no analog video

Re: New I/O Board, AV Board

Re: TMNT Core is Gone?

Re: Toki Core Released

Re: How to Reduce Fan Voltage?

Re: How to Reduce Fan Voltage?

Re: MT32-Pi Connection with Raspberry 3A+

Re: N64 Core Development Ends

N64 Core Development Ends

MiSTer NFC Project by Wizzo Covered by The Verge

MiSTerCast Released

Re: Saturn Core Hardware issue? SDRAM?

Re: Saturn Core Hardware issue? SDRAM?

Re: Many Cores Suddenly Not Working?

Re: Many Cores Suddenly Not Working?

Re: Analog IO Board, Arcade CRT and Screen Issue With Some Cores [Solved]

Re: Create a Custom update_all Script?

Re: Stuttering and slow downs in Gunstar Heroes

Re: Groovy_MiSTer Core

Re: Neo Geo Pocket

Re: Sega Saturn Core in Development

Re: In a Haze I Mistyped My Username

Re: In The Hunt

Re: d3fmod ironclad rtc question

Re: Startup Boot Audio