MiSTer FPGA Forum

twonunpackmule

It is possible the mod itself uses areas of the console that aren't typically used. So, you won't run across said issues with other titles. This is the problem with mods/hacks. I'm glad we can limit it down to pretty much the core/mod itself. Sorry I don't have much else to say...but these things happen and its not a bad thing to reach out for solu...

twonunpackmule

Have you tried the file on OG hardware?

twonunpackmule

Aren't quite a few of the arcade cores open to public now? CPS 1 and 2 have quite a few solid Capcom beat em ups.

twonunpackmule

That would have to be answered by someone else.

twonunpackmule

So if I add to this to the rom, and then I put the rom on my MiSTer it will now have level select, save states, etc. depending on the hack. Now that is awesome. Are there arcade hacks like this? Thank you. It won't have level select or "save states" per say. It will simply save after each level completed for you to resume later. It's jus...

twonunpackmule

Please forgive me, I'm new to MISTer. Could you expand on this or post a tutorial. Thanks. It isn't just for MiSTer, it's for OG hardware too. So, just treat the rom patching like you would be using it for OG hardware. For tutorials, you will have to follow each set of directions per title. They are typically included on the rom hacks page. Now, t...

twonunpackmule

Jae099 wrote: ↑Tue Aug 08, 2023 1:35 am
Is there a tutorial out there for the SRAM mods. Stage select is the very reason I want save states. 1942 def needs it.

ROMHACKING.NET

The site has an online patcher too. So, you don't need to know too much other than the directions in each readme file. Most require the USA REDUMP Romset.

twonunpackmule

I do think at some point, someone will go back and do it. However, in the meantime, there's a bunch of SRAM mods for Genesis and SNES. So, that's a solid work around.

twonunpackmule

Hectic wrote: ↑Wed Jul 19, 2023 2:29 pm
I think the issue is Mister writes data to microsd when you open the mister menu. if you hard or soft reset mister w/o opening the menu, data wont be saved.

^ This. I tend to forget about this when I go back and forth between real hardware and the MiSTer. You gotta remember to open the OSD menu to actually save to the SD.

twonunpackmule

I think it only supports RGB. If you want component you'll need to get the HD Retrovision cables, or a cable that converts the signal to Component.

twonunpackmule

I have the same stick. I didn’t run into much issue. You might try and delete the input devices and reset their settings. The next option would be to check the soldering points on the PCB of the stick. Mine came from JP with a super gun mod. It wasn’t disclosed got the stick for under $200. I had to upgrade the buttons and had the solder freshened ...

twonunpackmule

With the 23.02.24 update the demo of Amazing Spider-Man doesn't appear to crash anymore. Haven't actually played the game to confirm that it won't crash in-game. Yeah, this version of the core has been around for a couple months, it just got updated publicly today. It does indeed fix the crash in Level 1 of Spiderman. I always thought that was a r...

twonunpackmule

I have a slew of them. I have a MadCatz Tournament Sticks (still crossing my fingers someone is able to make a firmware for the OG Playstation 3 stick just so I don't have to mod it). I also got the dual Saturn Astro City Style Stick and use daemonbyte adapters to connect via MiSTer and PC. It's really about personal preference and intention. What ...

twonunpackmule

Yeah I'd actually disagree a bit, ferropop, in that I have sometimes found myself wanting to play a MD/SNES game on MiSTer but don't feel I have the gumption to commit to its entire length in one session. In such cases I wished save states were available to let me "pause" between sessions. In their absence I have taken to looking for in-...

twonunpackmule

I tested and got working Logitech G29 and G290. The only issue I faced with the two wheels were brakes not behaving "correctly." However, I believe by follow the directions for setup on the MiSTer Main but swapping Clutch for Brakes on Outrun, led to me resolving the issue on that particular game. Both wheels worked for Playstation core j...

twonunpackmule

I was able to get it to work...magically. Following the directions to a T led to the same issue occurring over and over again. However, when mapping the buttons to the MiSTer Main I followed the directions, but when mapping to the OutRun Core I swapped brakes for clutch. This led to the brakes working correctly via the brake pedal. Not sure why. Bu...

twonunpackmule

No. I have gotten the EX rom to run, but only in non-fastrom.

twonunpackmule

The author of the driver answered me on Patreon that he can't support officially the G920 but only the G29 because G920 doesn't offer the needed documentation / API to developers. I've ordered a G29, tomorrow it will be delivered to me and I will let you know if the pedals (same problem here) work correctly... Hmm. Not excited about having to get ...

twonunpackmule

That's sad. Either way, let me know how the G29 goes. I have some ideas on how to correct my misfortune.

twonunpackmule

I tested the game with a recently acquired Logitech G920 wheel and pedals. I was able to get the game to play using the setup, but found that during gameplay the pedals would get confused. Basically, once I tapped the brake pedal, it would then require me to hold the brake pedal in order for the acceleration pedal to work. Any known reason why thi...

twonunpackmule

I tested the game with a recently acquired Logitech G920 wheel and pedals. I was able to get the game to play using the setup, but found that during gameplay the pedals would get confused. Basically, once I tapped the brake pedal, it would then require me to hold the brake pedal in order for the acceleration pedal to work. Any known reason why this...

twonunpackmule

I could check later tonight. I would have to get my PS4 out of storage and I cannot confirm PS5. Though, I'd say it should be a safe bet if it works on PS4 it has a high possibility to work on PS5. It does work well with the PC. I have used a Sega Saturn Virtua Stick Pro HSS-130 and tried a few PC titles.

twonunpackmule

Thanks for the reply! I'm going to recap the 310 and see if it resolves some of the issues. I think it might be the case. As I did notice it while testing my PSX the other day. So, I know now that it's not just the MiSTer. I will report back once I get that done. Which, honestly, with my schedule could take awhile. Still, I'll take other suggestion...

twonunpackmule

As promised, here are my settings currently. I tried taking video of the "warping/"wavy" picture, but I can't seem to capture it properly. [MiSTer] key_menu_as_rgui=0 ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga) forced_scandoubler=0 ; set to 1 to run scandoubler on VGA output always (depends on core)....

twonunpackmule

Good day everyone! I’m having an issue with the analog video out on my 36FV310 while playing Arcade Cores on the MiSTer. I’ve tested my various consoles and the console cores and I haven’t had this issue pop up. So, the problem doesn’t occur when using the SNES core for example. It’s rather new actually. I think I started noticing it in the last we...

twonunpackmule

I have a few 8BitDo controllers and have a great experience with all of them. I have also purchased a few RetroBits whether it was their Genesis/Saturn and have had mostly a good experience with those. The C button on one of the Genesis controllers was not "good". Other than that...pretty damn solid. They feel good and responsive and noth...

twonunpackmule

twonunpackmule, would you be able to try out your 6 button controller via SNAC using the 6 button controller tester from https://huguesjohnson.com/programming/genesis/6button/ ? In particular, I'm wondering whether the button display at the top of the screen seems to work OK, and also what value you get for cycle 9 (TH high) during VBlank read (th...

twonunpackmule

I've not been especially impressed with Retro-Bit's controllers, compared to the M30 the Megadrive and Saturn pads didn't feel nearly as premium or solidly built. Both got returned pretty sharpish. I mostly vouch for the M30 as well. I just wanted to comment on Retro-Bits Saturn controllers. I just recently got into the Sega Saturn. Bought OG hard...

twonunpackmule

Did you include the script for disabling the power check? Your PI might be getting throttled.

twonunpackmule

I know this might not be the answer you are looking for, but honestly this game is best played using Dual Analog Sticks. If you have a DS3/DS4 or DualSense just use that and you'll have a great experience. They are also super low latency when hooked up via a cable. I've mostly gone back to using USB. A lot of the point was just testing purposes. S...

MiSTer FPGA Forum

Search found 58 matches

Re: Castlevania - Symphony of the Night (v1.0)[Meduza Team]

Re: Castlevania - Symphony of the Night (v1.0)[Meduza Team]

Re: Best 4 Player Games on MiSTer?

Re: Save States Master List

Re: Save States Master List

Re: Save States Master List

Re: Save States Master List

Re: Save States Master List

Re: Saving is not working for me on the Genesis core

Re: Does the Saturn video output support a component cable?

Re: Help with Configuration of a SEGA HSS-0130 with Daemonbite 2x SEGA SATURN

Re: Sega 32X Core

Re: Arcade Joystick Recommendations?

Re: Save State Support

Re: Which Racing Wheel Controllers Have You Got Going?

Re: Outrun

Re: Starfox FASTROM 21MHz SuperFX Not Working

Re: Outrun

Re: Outrun

Re: Outrun

Re: Outrun

Re: Does the Ultimate Deamon 2x Sega Saturn Adapter Work on the PS4 or PS5?

Re: Analog Video is “wavy” on Arcade Cores

Re: Analog Video is “wavy” on Arcade Cores

Analog Video is “wavy” on Arcade Cores

Re: New 2022 PS1/2/3 Controllers by Retro Fighters and 8bitdo

Re: Issues with M30 (Genesis 2.4ghz using SNAC) playing Xenocrisis

Re: Best Controllers to Use?

Re: MT32-Pi Issue

Re: Issues with M30 (Genesis 2.4ghz using SNAC) playing Xenocrisis