MiSTer FPGA Forum

Grumpy-Old-Gamer

rcade wrote: ↑Thu Dec 07, 2023 1:45 pm
I think the 128 core is more mature. They probably should be merged at some point like the 2600/7800.

There are already MRA files to make the 128 into a 64, but it has issues with reset.

The C128 core is based on the C64 core though... and really the C64 core origins date back 20 years. FPGA64 was developed for the C-One FPGA

Grumpy-Old-Gamer

MrSniffles wrote: ↑Sat Dec 09, 2023 10:52 am
Works pretty great on the N64 core too.

N64 core doesnt use dual SDram

Grumpy-Old-Gamer

But aren't the USB hubs powered directly from the power supply, whether via a y splitter or a jumper piece that is what actually delivers power from the hub to the DE10-nano? If you route the power through the Mister, the most you can supply to the whole stack is about 4A, because that's all the DE-10 will transmit across the board. It has overvol...

Grumpy-Old-Gamer

The recent Final Fight 30th anniversary CPS2 ROM hack is three player and very good

Grumpy-Old-Gamer

PS1 variable or low frame rates was not always intended it was a by product of being CPU limited and we can see with the Turbo or X2 CPU core in MiSTer how a lot games could perform without affecting the game logic but depends on engine. Some frame rates on a stock PS1 are very poor. So the latency will be all over the place unintended and this is...

Grumpy-Old-Gamer

Imho a lot latency or lag is overblown and a lot of these old systems were not latency free to start with for example a original SNES had up to 72ms or 3.6 frames of latency on a CRT Any latency inherent to the console will be known to the devs and compensated for with game design. But they didn't know about flat panels, and won't be considering e...

Grumpy-Old-Gamer

But not the hardware itself. The lag was programmed into the games. Super Mario World has 2-3 frames of lag iirc. Most 8bit games (after the VCS Generation) had mostly 1 frame, later 16bit games 1-2. I wouldn't say the lag is programmed more a side effect of a combination of code and hardware. The SNES CPU was pretty poor and the cause of the slow...

Grumpy-Old-Gamer

@FPGA64 I have a 4 way joystick - leaf switch so smooth it's like butter (https://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=65&products_id=407), I would highly recommend it. @Lloyd2084 I'm using a de-10 Nano. I don't know what a lag free controller through SNAC or other low latency is. There is no lag when I'm cont...

Grumpy-Old-Gamer

Imho a lot latency or lag is overblown and a lot of these old systems were not latency free to start with for example a original SNES had up to 72ms or 3.6 frames of latency on a CRT Systems like PS1 the frame times are all over the place at times as would be the latency Using USB with MiSTer it's hard to notice any additional latency even on a LCD...

Grumpy-Old-Gamer

My focus was on breaking the lock on the DE10-nano and widening the MiSTer platform, so we could have more fun developing more hardware, more cores and hopefully lowering the price point and increasing functionality. Are people interested in physical interfaces for cartridges / peripherals Maybe a dedicated computer baseboard that has many or the ...

Grumpy-Old-Gamer

Intel never took Altera internal after the buyout and the chips are still fabbed on TSMC 28nm, with TSMC increasing 28nm capacity and it being a older node you would have expected supplies to have improved by now. Though we don't know Intel's wafer deal or how much Terasic is controlling supply while enjoying the higher prices. Terasic has always h...

Grumpy-Old-Gamer

Oh granted but there is nothing really new in using FPGAs in Retrogaming or even add ons. We have seen some great projects over the years like C-One, Minimig, MiST, Turbo Chameleon, Ultimate 64, 1541-U2, FPGA SID etc We have seen lots of smaller multi system FPGAs too and analogue pocket now has MiSTer core ports All we really need is Terasic to re...

Grumpy-Old-Gamer

I've seen the idea of a alternative board or MiSTer 2 thrown around before on the FB group. A cheaper alternative to the DE-10 would be nice but we might end up in the same situation with a alternative board I've also seen Sorg state on FB there isn't much further to go with FPGAs in general in terms of retrogaming for various reasons We have also ...

Grumpy-Old-Gamer

The facebook post is from Allen Albright, one of the developers of the original ZX Spectrum Next core. I think he knows what he is talking about. He explains the SD speed issue in detail in an answer to this post. If you are in doubt of his points, just try it out. I don't plan to, as I am sure he is right. The ZX Next die hards are a funny group ...

Grumpy-Old-Gamer

The inline switches can cause issues.

One reason I prefer the digital IO board over the Analogue is the better power delivery setup and power switch

Grumpy-Old-Gamer

The Amiga is horrible and deviant for normal TV standards, yes. Barring any new options being added to the core, your main recourse is going to be to mess with the scaler rather than the simple direct output to try and standardize things. Maybe something like [minimig] vga_scaler=1 direct_video=0 video_mode_ntsc=660,240,60,cvt video_mode_pal=660,2...

Grumpy-Old-Gamer

I just had to replace my old fan, which failed at less than six months of age. I used a Noctua as a replacement, and it's working fine. People saying you don't need a fan are wrong in many cases. I had multiple arcade cores crashing when I was heatsink-only, and the bad fan on the digital I/O board was nearly painful to touch. Now that the new fan...

Grumpy-Old-Gamer

I just had to replace my old fan, which failed at less than six months of age. I used a Noctua as a replacement, and it's working fine. People saying you don't need a fan are wrong in many cases. I had multiple arcade cores crashing when I was heatsink-only, and the bad fan on the digital I/O board was nearly painful to touch. Now that the new fan...

Grumpy-Old-Gamer

I just had to replace my old fan, which failed at less than six months of age. I used a Noctua as a replacement, and it's working fine. People saying you don't need a fan are wrong in many cases. I had multiple arcade cores crashing when I was heatsink-only, and the bad fan on the digital I/O board was nearly painful to touch. Now that the new fan...

Grumpy-Old-Gamer

Does your PSU offer enough amps to power the Raspberry Pi over the SNAC port ?

Is the USB 3.0 cable used short enough as this can cause issues ?

Grumpy-Old-Gamer

The recent 30th anniversary CPS2 ROM hack is very good too

Grumpy-Old-Gamer

All my wallpapers are working fine after the recent update

Grumpy-Old-Gamer

LamerDeluxe wrote: ↑Wed Dec 28, 2022 8:49 am
And the secondary SD card slot isn't uncommon either, as lots of people have the analog IO board.

It's included on the digital IO board and nearly all the AIOs I've seen

Grumpy-Old-Gamer

Sorg stated on Facebook the timings on the core are correct and I believe he said the core is a bit of mess anyway if my memory serves me correctly There has been very few core updates though as he doesnt like fantasy computers There is also a experimental overclock for the ARM side now The ZX Next die hards are a funny group if it's not the unobta...

Grumpy-Old-Gamer

I just use a BT mouse I share with the PC currently works fine on Amiga, ST, PC etc

I do have one of the Kickstarter modern Amiga tank mouses arriving at some point though....

Grumpy-Old-Gamer

I would say it's a L2S audio mod like we see on other AIOs

The DE-10 DAC can be a bit noisy

Grumpy-Old-Gamer

I am seeing this design of adapter more and more and was curious about it I see them claiming to be compatible with a bunch of things like the ntt data pad, can anybody confirm if these are actually quality? Also, I saw no mention of paddle support for the atari side, does anybody know if they are or aren't? Those will be based on Mike's Daemonbit...

Grumpy-Old-Gamer

The Daemonbite DB9 USB adaptor only adds around 0.74ms of latency, are you sure your adaptor adds 1 frame (16ms) ?
If so they are cheap to make and games feel spot on

The is SNAC support for the C64 core via Antonio Villena DB9 SNAC using the forked cores but you also need one of his AIO boards or an Ironclad ITX

Grumpy-Old-Gamer

From a 10,000-foot overview, it seems like the SD2IEC is doing the same thing that the Mister is already doing, just with a different interface. If someone implements it, it might be nice to have a toggle to either send the commands out the SNAC port, or else redirect them to the existing drive code. That way, you can either provide a real SD2IEC ...

Grumpy-Old-Gamer

: M2fqkw5.png (84.93 KiB) Viewed 811 times

MiSTer FPGA Forum

Search found 57 matches

Re: C64 problem with The Space is Broken demo

Re: Any Hope for Mortal Kombat I,II & Ultimate?

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Good 3-4 Player Simultaneous Games (Any Platform) Currently Available on MiSTer?

Re: What Adds Input Delay?

Re: What Adds Input Delay?

Re: What Adds Input Delay?

Re: How Do I Add My Own ROM to the MiSTer FPGA? Where Are High Scores Stored?

Re: What Adds Input Delay?

Re: Discussion and Development of a 'MiSTer 2.0' Modular Hardware Platform

Re: Discussion and Development of a 'MiSTer 2.0' Modular Hardware Platform

Re: Discussion and Development of a 'MiSTer 2.0' Modular Hardware Platform

Re: Discussion and Development of a 'MiSTer 2.0' Modular Hardware Platform

Re: On the Next Core

Re: Inline Power Switch for 5V/4A ?

Re: Trouble with PAL/NTSC Output on CRT

Re: Is the Noctua Fan Quiet? What Are Other Ways of Reducing Noise on MiSTer?

Re: Is the Noctua Fan Quiet? What Are Other Ways of Reducing Noise on MiSTer?

Re: Is the Noctua Fan Quiet? What Are Other Ways of Reducing Noise on MiSTer?

Re: MT32-Pi Works, but Does Not Turn On OLED Is Not Detected!

Re: Final Fight on the Mega Drive

Re: Menu Core v221224 and Wallpaper

Re: On the Next Core

Re: On the Next Core

Re: DB9 Mouse on MiSTer

Re: MiSTer FPGA Update Module Retro Castle?

Re: Are these adapters any good?

Re: SNAC Version of C64/C16/VIC-20

Re: SuperCPU128DX MiSTer

Re: Porting Mega65 to MiSTer?