MiSTer FPGA Forum

fatterdude2000

Thanks djmerl release_20210917 seems to contain the latest uboot.img that works for me. However if I use the uboot.img in later releases I get a boot loop: U-Boot SPL 2017.03+ (Dec 24 2022 - 15:55:06) Trying to boot from MMC1 U-Boot 2017.03+ (Dec 24 2022 - 15:55:06 +0800) Watchdog enabled DRAM: 1 GiB .. and then repeats every 40 seconds or so So, a...

fatterdude2000

Take a look here: viewtopic.php?t=3724

From my DE10, I can't upgrade beyond release_20200122 without suffering reboot hell.

fatterdude2000

wasn't taking notes but seems that my de nano doesn't play nicely with latest boot file later than release_20200122 I'm been mucking about for hours trying to get this working again, here are the rough steps (I wasn't taking notes and largely just retrying things multiple times) I took to get to working state: Had first tried to just reflash with s...

fatterdude2000

further info:
I reset everything, used mr fusion 2.7. After mr fusion completed, it restarted automatically and I could see the menu as expected. However after I switched off and back on I am back without HDMI signal being detected, leds on de nano and off. I repeated, this time with mr fusion 2.6 and same problem.

fatterdude2000

It's been a while but I am stuck again. When I boot mister there is no activity from the leds and no hdmi signal detected. As before I can revert to the image dated 20210711. Works. However, I cannot update. Seems latest downloaders use Python which isn't in the 20210711 build and therefore error. I tried manually copying the MiSTer_20220511 (and r...

fatterdude2000

my board is revision C

fatterdude2000

In case it helps narrow it down, here is my setup: digital io board 1.2 usb hub 2.1 with the bridge connector (i did remove all my usb devices for testing but still would not boot) sdram 128MB sandisk 256GB (also tried integral 256GB which was my original and working fine for months before latest update) Currently I have the older bootloader workin...

fatterdude2000

I would also like to know. I have the exact same problem. If I use the newer bootloader my de10 fails to start after a power cycle.

fatterdude2000

Reverted to release 20210711. Boots fine. Update using downloader.sh this time (why not , tried update.sh and update_all.sh before). Seems to update ok but as soon as a power cycle it doesn't boot again and no leds light up. I'll give up for now and stick with 20210711 unless anyone knows what's going wrong. I don't think my setup is unusual. digit...

fatterdude2000

After upgrade I cannot boot mister. Power light is on but leds do not light up and no hdmi signal. I have 128 ram , digital io and the usb addon. I have tried 2 different sd cards. I did a complete reinstall with mr fusion 2.3 image and it boots as normal. I can connect to wifi and even power off and on at this stage. Once I run update script that ...

fatterdude2000

Thanks for the script w00tazn. Works ! (for my setup I had to edit the files to point to Scripts rather than #Scripts)

fatterdude2000

w00tazn wrote: ↑Sun May 24, 2020 10:35 pm I've been running a script that someone kindly developed that will play a wav file using the ALSA system in linux and that will allow the core to wake up and have audio...

Please can you share the script and provide more info. I don’t get sound from a few arcade cores (eg Donkey Kong) from my asus monitor. Would be great to have a solution.

MiSTer FPGA Forum

Search found 12 matches

Re: Cannot boot after upgrade

Re: RE-new Install NOT Rebooting

Re: Cannot boot after upgrade

Re: Cannot boot after upgrade

Re: Cannot boot after upgrade

Re: Bootloader Changes?

Re: Bootloader Changes?

Re: Bootloader Changes?

Re: Cannot boot after upgrade

Cannot boot after upgrade

Re: No Sound via HDMI

Re: No Sound via HDMI