MiSTer FPGA Forum

KnightNZ

Direct Video is super patchy but rom compatibility is dramatically improved. Thanks to Grey Rogue for picking up the torch on this one. Finally a reason to have dual ram!

(Edited to remove my inflammatory comment)

KnightNZ

Amazing, thank you.

KnightNZ

Emubastard wrote: ↑Fri Mar 01, 2024 3:53 am
Go find it with "Special Sauce MiSTer FPGA DOS game collection".

A Google search for that just brings up this thread for me

KnightNZ

Always good to see the Amiga on the pocket getting an update, unfortunately some games run very fast, like buggy boy and bombjack.. Pretty sure that has nothing to do with the MiSTer/Pocket cores, but if someone could test it on original hardware (I don’t have my Amigas in my current location), that would be appreciated. WHDLoad bugs can be report...

KnightNZ

I am not sure if this has been covered or not, but is it possible to stream this to multiple MiSTer's at the same time? It would be cool to have this option for a sort of video distribution system, especially now with the ability to stream PC applications and that could be used for watching movies on CRT's in different rooms for example. For groov...

KnightNZ

Hi, I thought I'd share my patch to the stand alone dolphin emulator. My motivation for this was simply to play MM9 in 240p. Been wanting this a long time but not so bad that I have bought some downscaler hw. This groovy mister core let me do it for free :D . Today I fixed some bugs in my patch and played through the entire game without issues, so...

KnightNZ

I am surprised to learn that Alien 3 for Master System seems to run fine on the Nuked-MD core. This game is notorious for not booting at all on actual Mega Drive consoles. Is this a bug, or was something intentionally tweaked in the core to make this game playable? Might be some region thing, my Australian copy of Alien3 works just fine on my unmo...

KnightNZ

I've discovered that the analog output does weird things if composite_sync=1 is set for the Nuked MD and 32X cores, no other core has the problem, these 2 cores seem to be outputting a really weird (or no?) sync signal with that enabled, but outputs correct RGBHV with it set to 0. HDMI output is obviously fine regardless. Is this a known issue curr...

KnightNZ

limi wrote: ↑Sat Apr 22, 2023 10:41 pm
WHDLoad (which is the system AmigaVision/MegaAGS uses) works similarly, if you don’t exit the “container” that runs the game, it has no way to write the save to disk.

Makes sense. Thank you!

KnightNZ

I was playing Cannon Fodder earlier using MegaAGS and the games save ok, but don't persist across reboots. Is there any way to make this happen other than remembering to press Del to exit?

Thanks!

KnightNZ

Can confirm that this works a treat, thanks so much. Those buttons to reduce the wheel rotation should be in the device manual, not hidden in their FAQ as they appear to be.

KnightNZ

Thank you all for your answers! I am too lazy to convert things, so i searched a little more and found everything i was looking for in *.st-format. Let me just say "TOSEC", awesome ;) miSTER is just great, it's like a Timemachine for me .... Btw., anyone know how the HELP-Key is mapped on a PC-Keyboard? Cheers Ray/DF You didn't find a ga...

KnightNZ

I recently downloaded the Top 300 Pack. That's really a fantastic collection, thanks a lot to @'flynnsbit'. I also saw that there's an Update Script, so I wanna install this as well. I am quite not sure how to get it installed. Maybe someone here could tell me what exactly I have to do with the downloaded zip file? I also read the README file, but...

KnightNZ

XtraSmiley wrote: ↑Sat Nov 05, 2022 4:30 am Was there ever an update to this?

Nope. If this is going to get done, it'll most likely need to be done by someone other than Andy.

fwiw - Batocera 35 now has Sinden support and it mostly works really well, much better than stuffing about with the PC software or the hodge-podge Raspberry Pi install.

KnightNZ

Forgive my necro-posting, but I can't get the spinner to work on this thing using the "back-red" enable combo. Anyone have a clue as to what the issue is? Was the enabling code changed? TIA. Holding down both red buttons, AND the back button, AND spinning the stick clockwise seems to work, a bit tricky to actually do it though. The Arkan...

KnightNZ

Just putting my 2c in on this one, would love support for this so I can play Arkanoid and Centipede the way they were meant to be played!

Please and thank-you!

KnightNZ

So I decided to try something else on my monitor just to rule out a power/control board issue. I hooked up my Analogue Super NT and ran Super Mario Kart (JPN cart) for over 40 minutes without a single problem. That brings me back to the MiSTer as the likely culprit. I've read a lot of conflicting information online about what video settings to use...

KnightNZ

srg320 made a minor update to some of the github docs about a week ago, so still alive!

KnightNZ

Hi guys, I'm having an issue I've yet seen reported. I've followed the steps to update my Exodos Top 300 vhd. ssh or F9 to get to the console of your MiSTer cd /media/fat/Scripts wget https://raw.githubusercontent.com/flynnsbit/Top300_updates/main/_mister/AO486_Update_Top300_Pack.sh or wget https://tinyurl.com/updatetop300 wget https://raw.githubu...

KnightNZ

I've got a DIY'd Laserbear setup (sourced the case from LB, the other pieces from various sources). The controller board looks identical to the LB one although it has the RTD2556 chip on it, not the RTD2556T, which means even after flashing LBs current firmware, I don't get Aspect Ratio control, or rotation, neither of which particularly worry me. ...

KnightNZ

I "bricked" my board by flashing a wrong firmware. Before flashing it was detected on windows and the RTDTool could connect via GFXI2C interface driver . After flashing with the wrong firmware the board won't even power up. Windows won't detect a device and so RTDTool can't connect to it. I'm doomed! But I think it's still possible to fi...

KnightNZ

Edit - nm, found an earlier post with the config process.

KnightNZ

If you are looking for the FW to pilot an iPad3/iPad4 screen with either an RTD2556T or RTD2550 you can try the following dumps below. ipad_rtd2556T.bin ipad_rtd2550.bin Kids, don't do this at home... I've flashed my board and now I have a brick :-( I've got 2 board of different designs, both with the RTD2556 (not T) - the firmware works fine on o...

KnightNZ

Just as a FYI - if you have one of the acrylic cases of the sort that https://misterfpga.co.uk sell, then the mt32-pi lite will not fit. The casing is too thick and the connector doesn't reach. If you only have the top/bottom plates, then you're fine. I hadn't considered this, and discovered the hard way. I managed to get it to just work by removin...

KnightNZ

I found the screen also in taobao, the seller told me they use the RT2556, but they couldn't confirm if it works with 50Hz. They sent me a photo of the controller. Please, could you confirm from the photo if this model with two mini HDMI would do 50Hz? The chip does, it's a lottery as to whether or not the firmware on any given device will however...

KnightNZ

Has someone worked out a relatively "safe" process for flashing the Laserbear firmware to one of the RTD2556T boards?

KnightNZ

This looks like a useful solution, I'd really like to know if it's "safe" for the MiSTer components from an electrical perspective. I'm not convinced that the USB hub is designed to be used in this fashion, it obviously _works_ but are there any associated risks versus powering the device the "normal" way. Are we able to find so...

KnightNZ

It is truly a thing of beauty. Thanks very much to @nullobject for his work!

KnightNZ

nizce wrote: ↑Sun Apr 24, 2022 8:38 pm Just received mine. Didn’t come with a power adapter. Anyone know if the center of the 12 barrel plug should be positive or negative?
Or can I simply use an iPad charger to power it via the micro USB port(don’t know how many amps is needed)?

You can power it from mUSB, seems to need about 2.5 Amps.

KnightNZ

FWIW - I received my unit and using the cable in the box it would not receive a signal from the MiSTer @ 1536p at all. I used a different (better quality) cable and now 1536p works. I had plugged it into a Retrotink 5x and the 1536p from that works so it may just be that the MiSTer doesn't quite output a strong enough signal and the cheap cable eat...

MiSTer FPGA Forum

Search found 34 matches

Re: Atari Jaguar Core

Re: AmigaVision 2024.10.10 Released with Internet Support + MiSTer CD32 Launcher, 182 Game Updates

Re: Special Sauce Collection (Now Superseded)

Re: Analogue Pocket can now use AmigaVision images made for the MiSTer

Re: Groovy_MiSTer Core

Re: Groovy_MiSTer Core

Re: MiSTer Nuked-MD Mega Drive Core

Re: MiSTer Nuked-MD Mega Drive Core

Re: MegaAGS Game Saving

MegaAGS Game Saving

Re: Racing Wheel (Thrustmaster T300RS) Configuration & Usage Guide

Re: Convert .msa & .stx to MiSTer *.st-files?

Re: Depricated.

Re: Andy Sinden Aiming to get his Lightgun Working on MiSTer

Re: Atari VCS Classic Stick Spinner Support

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Sega Saturn Core in Development

Re: Depricated.

Re: 9.7” iPad Screen Board Firmware Discussion

Re: 9.7” iPad Screen Board Firmware Discussion

Re: Taito Egret II Mini Rollerball/Spinner Controller

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

MT32Pi Lite & Thick Cases

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: External Power Supply for USB Powering MiSTer FPGA

Re: Cave Core Guwange Public Release

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄