MiSTer FPGA Forum

elrubioVS

Just to round this post off, the Digital IO board fixed the issue. My Analogue IO board must have grown a fault.

elrubioVS

dickhardpill wrote: ↑Mon Jul 15, 2024 9:07 pm
Do you have the most recent jtbeta.zip?

You were right it was related to jtbeta.zip

elrubioVS

UPDATE: I've not yet got the Digital IO board but i have noticed more oddities (remember that this is a fresh build of MiSTer). All games on the Irem cores & Tecmo cores produce no sound through the Analogue IO 3.5mm audio jack (HDMI audio works fine) Shadow Dancer does not receive an INSERT COIN input even after it allows me to define the INS...

elrubioVS

thorr wrote: ↑Tue Jul 16, 2024 10:40 pm
Just to be sure, make sure the big DIP switches on the main MiSTer DE10 Nano board are in the correct position.

Yep thanks familiar with that catch

elrubioVS

dickhardpill wrote: ↑Tue Jul 16, 2024 11:09 am
Shadow Dancer is a jtcore.

Maybe I’m just understanding.

Shadow Dancer does not receive an INSERT COIN input even after it allows me to define the INSERT COIN button in the config

Ah Shadow Dancer, sorry yeah. Ok will try thanks

elrubioVS

dickhardpill wrote: ↑Mon Jul 15, 2024 9:07 pm
Do you have the most recent jtbeta.zip?

This is a new build so the latest would have been pulled down. They’re not JT cores either. Do you still think it’s worth checking? What does jtbeta.zip do?

elrubioVS

UPDATE: I've not yet got the Digital IO board but i have noticed more oddities (remember that this is a fresh build of MiSTer). All games on the Irem cores & Tecmo cores produce no sound through the Analogue IO 3.5mm audio jack (HDMI audio works fine) Shadow Dancer does not receive an INSERT COIN input even after it allows me to define the INS...

elrubioVS

Are you absolutely sure you didn't somehow set the per-core volume to zero or really low on these cores? Doesn't make sense that they wouldn't output for you when they do for everyone else. The sound is generated by the FPGA, same as any other core. Yeah absolutely 100% sure. It’s weird how it only seems to affect Irem M72, M92 games. There must b...

elrubioVS

Originally i was using analogue out for audio connected directly to my soundbar with a standard 3.5mm audio cable. Now i'm using a 3.5mm mini Toslink to Toslink cable connected to a DAC (both linked below) and this has massively improved the sound - no more loud popping sounds when rebooting or loading new cores. https://www.amazon.co.uk/dp/B08CDHY...

elrubioVS

Not sure what's up but FYI I just updated my cab an hour ago and I have sound on R-Type I, II no issues. Using the optical digital out on the analog output board. Do you mind me asking which cable you're using for audio? Which end is connected to the Analogue board and which is connected to the soundbar. I have an optic input for the soundbar so w...

elrubioVS

Some (not all) arcade games are no longer outputting any audio at all. R-Type 1, 2, Dragonbreed, Air Duel (Irem M72 core) R-Type Leo (Irem M92 core) and Silkworm (Tecmo core) among others. The audio works fine for other arcade games. Audio is connected via the 3.5mm audio jack of the Analogue IO board to the 3.5mm audio input of a soundbar. Beyond...

elrubioVS

Vic20-Ian wrote: ↑Sat Jun 15, 2024 7:52 pm
You could try deleting one core and it's files and then update all and see if that brings it back.

Nice thanks. I’ll give that a try and report back

elrubioVS

dickhardpill wrote: ↑Fri Jun 14, 2024 8:03 pm
Is it still silent when you get a credit in and start a game?

Yep, totally silent at all times with demo sounds on/off, with game volume at maximum and after resetting the game settings.

Thinking i’m going to have to rebuild the MiSTer on a new card and start from there. Then copy across each cores settings individually.

elrubioVS

FPGA64 wrote: ↑Fri Jun 14, 2024 7:59 am
Did you go in game ? Some of the arcade games default to no sound on atract mode, this has to be altered in the dip switches on the arcade game.

Yep that was in-game menu. Demo sound dip switches are off for all these games. I had already toggled these to test any differences but there is no change.

elrubioVS

dickhardpill wrote: ↑Thu Jun 13, 2024 6:05 pm
Open the menu and press left. It should take you to the information screen.

I just verified I have audio in R-Type (World)

Thanks for checking!

I checked the volume settings and the core and main volume are all the way up. (All the configuring i’ve done on my MiSTer and I don’t think i’ve seen that screen!)

elrubioVS

dickhardpill wrote: ↑Thu Jun 13, 2024 5:00 pm
Have you checked the core volume in the menu?

How do i do that mate? Can’t see a volume setting for those games in the OSD menu.

Do those games work for you after an update_all?

elrubioVS

Some (not all) arcade games are no longer outputting any audio at all. R-Type 1, 2, Dragonbreed, Air Duel (Irem M72 core) R-Type Leo (Irem M92 core) and Silkworm (Tecmo core) among others. The audio works fine for other arcade games. Audio is connected via the 3.5mm audio jack of the Analogue IO board to the 3.5mm audio input of a soundbar. Beyond ...

elrubioVS

SOLVED: The JammASD board does not take button 6, 7 & 8 inputs from the Jamma harness. They have to be wired seperately.

I snipped the button 6 wires that led from the buttons to the Jamma harness and wired them directly into the JammASD board.

elrubioVS

I've got my MiSTer setup with a JammASD which is connected to my Jamma harness. The same Jamma harness, when connected to my Jamma board (412 vertical games) works perfectly and all buttons respond in the input test. However when connected to my MiSTer I can't get button 6 to respond at all. Couple of questions: Are there any troubleshooting steps ...

elrubioVS

FPGA64 wrote: ↑Mon Jun 13, 2022 7:54 am When you launch Update_all push up to go into the configuration and ensure the Mame getter script is enabled. I believe update_all was changed recently that it now defaults this to off

Fixed! The Arcade cores now load.

Thanks so much!

elrubioVS

FPGA64 wrote: ↑Sun Jun 12, 2022 4:15 pm I would get the one from MisterFpga.co.uk

https://misterfpga.co.uk/product/mister ... er-supply/

much better power supply. Although do remember you need the mains to the power pack cable too

Perfect thanks! I must admit I was nervous about blowing up my DE10

elrubioVS

FPGA64 wrote: ↑Mon Jun 13, 2022 7:54 am When you launch Update_all push up to go into the configuration and ensure the Mame getter script is enabled. I believe update_all was changed recently that it now defaults this to off

Ah yes. I've made this change and started the script again. It's currently pulling down the additional files so fingers crossed. I'll report back.

elrubioVS

Hmm there is no “_Arcade/MAME” directory even when i rebuild. Can anyone else verify this?

elrubioVS

Thanks @MorkMikael

The “_Arcade” directory contains all the games you’d expect to see including Silkworm. I don’t see a MAME directory but is that a requirement?

I have run the update_all script multiple times with no difference.

elrubioVS

Just reformatted and rebuilt my MicroSD card using Mr Fusion and the Update All script. Upon completion if I try to launch any cores I get an error as per the below example (where I launched the Arcade Silkworm core): /media/fat/_Arcade/mame/silkwor silkworm.1 not found When I check the MicroSD card there is no MAME directory and I'm not sure why i...

elrubioVS

It's power supply related.

I was using a USB cable connected to the mains with an Apple 5W USB plug. This just gives me the flashing red/amber LED's.

If I use the exact same setup with the USB connected to a USB 3 port on my laptop then it works fine.

I need to purchase a proper power supply.

elrubioVS

UPDATE 2: I removed the SDRAM module and rebooted and I'm now seeing the "Mr Fusion is installing MiSTer" screen. Stay tuned.

elrubioVS

UPDATE: I've removed the IO board and wiped the MicroSD card. Reinstalled Mr Fusion and booted up but getting nothing from the display through HDMI at all. Tried a second MicroSD card with Mr Fusion and it's the same. No display.

Is there a way to flush/reset the DE10?

elrubioVS

My DE10 worked perfectly until I installed my IO Board. Now when I power-up I just get alternate flashing on the Red ( Power ) / Amber ( User ) LED's. The static/fuzz is displayed but I'm unable to get the OSD menu. You can see here: qmLp9U.gif My setup is as follows: I'm powering my DE10 with a USB cable ( https://www.amazon.co.uk/gp/product/B003M...

MiSTer FPGA Forum

Search found 29 matches

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

Re: No audio on some arcade games

No audio on some arcade games

Re: MiSTer with JammASD Button 6 not Responding [Solved]

MiSTer with JammASD Button 6 not Responding [Solved]

Re: New Build Cannot Find Cores

Re: Flashing Red / Amber LED's After Installing IO Board v6.1

Re: New Build Cannot Find Cores

Re: New Build Cannot Find Cores

Re: New Build Cannot Find Cores

New Build Cannot Find Cores

Re: Flashing Red / Amber LED's After Installing IO Board v6.1

Re: Flashing Red / Amber LED's After Installing IO Board v6.1

Re: Flashing Red / Amber LED's After Installing IO Board v6.1

Flashing Red / Amber LED's After Installing IO Board v6.1