MiSTer FPGA Forum

Radiant Silvergun runs fine at my end too. Although I did not spend more than 30 minutes on it.
- Dual SRAM v2.9
- Saturn_DS_20220930
- Bios JP v1.01
- Game MD5 1b5dc4600c09e06e448c30dedcf69d22

Thank you! the update worked as I pressed and hold down the boot button.

Use the „Connection Scheme Devkitc V4 and SSD1322“ with your Board. https://github.com/venice1200/MiSTer_tty2oled/wiki/Electrical#connection-scheme-devkitc-v4-and-ssd1322 Thanks again for your help, I confirm the DOIT devkit v1 works fine using the connection scheme for devkitc v4. Only minor issue is when I try to update the ESP thru the script, ...

Thanks for the explanation and pointing out the possibilities to use the board with MiSTer, I ended up purchasing the pre-build pi hat from misterfpga.
The board I built might still be useful with the Amiga 500+, will look into it.

You're kidding, right? Please tell me you're not connecting that cable between one of the Pi's own USB ports and the MiSTer's user port and expecting it to work. MiSTer HATs have their own special connector just for MiSTer. The HAT in your photo is not for this purpose, it's for standalone use as a traditional MIDI device using MIDI cables. I wish...

Hi, I've made a mt-32 pi hat based on the information found on this page https://github.com/chris-jh/mt32-pi-midi-hat The sdcard is configured, cfg file is configured and both mt32 installer and update scripts work fine on the MiSTer. The hat connects to a raspberry pi 3B (first gen) as I could not procure a 3A+, I use a digital IO board on the MiS...

Thanks, I'll give it a try.
Just to confirm that I should use the tty2oled_esp32-DevKitC_board?
I'll probably use Arduino IDE for the initial setup then use the script for updates.

venice wrote: ↑Wed Jul 06, 2022 9:16 pm Do you have a link or some pictures of the board?

Here is a picture of the board I have on hands.
Link to the pinout https://www.mischianti.org/2021/02/17/d ... and-specs/

Hi, would an ESP32 devkit v1 suffice for this project? I do not see a board with a matching pinout on the github.
Asking in case someone used the devkit v1 before otherwise I'll purchase one of the recommended ESP32.
Thanks.