MiSTer FPGA Forum

Brettster

the problem was one of the PAK files, with it removed it worked as expected

Brettster

I get a message when running the updated that the github certificate cannot be trusted, and when I added Pak file to the Pak folder, it just crashes when running openbot HDMI or CRT

Brettster

It's also in the user manual and has QR codes to videos on how to change the modes. Basically you hold the Mode part of the button down and press button 1,2 or 3. Button 4 puts the stick into SNK mode (Purple) which works with the SNK 40th anniversary pack on steam or Switch The way button is used to select how many Ways you want the stick to detec...

Brettster

Thunderstick works with Forgotten Worlds on Mister.

Make sure the stick is in mouse mode, (Red) and use the free spinning knob, set the Way to spinner

Brettster

Got mine delivered to the UK this week, final deliver was from Evri!! but no further taxes. I assume the higher postage to UK over Europe already took care of the taxes

Brettster

I had a similar issue with the Nintendo Switch N64 controller. Would lose its connection after power off. Every other controller I have was fine.
In my case I was using a BT/Wifi Dongle, switched it for an ASUS BT 5.0 only dongle and everything was fine after that.

Brettster

Quick update. I tried another BT only dongle and the NSO N64 controller is working fine now.
It's an Asus Bluetooth 5.0
https://www.amazon.co.uk/gp/product/B08B9WQFTL/

Thanks all for the help and suggestions

Brettster

Akuma wrote: ↑Tue Oct 17, 2023 6:32 pm
Did anyone reset their bluetooth profile ?
by renaming MiSTer_Data/linux/bluetooth file to MiSTer_Data/linux/bluetooth.bak
Then reboot and pair just the NSO Nintendo 64 controller?

Thank you for taking the time to post
I did try this, but alas in my case, no change.

Brettster

FPGA64 wrote: ↑Sun Oct 15, 2023 10:34 am
I have never had the issue. Do you both have a combined WIFI/BT ? that seems to be causing issues

Yes I do, actually, maybe it's something with the NSO 64 controller, as the other NSO controllers are fine. as are all the other 8bitdo etc
I'll try it with a separate BT dongle and see
Thanks for the tip

Brettster

I've been using MiSTer for many years and not really had any issues before with controllers but each time I switch on the MiSTer the official NSO controller needs to be re paired before it will work. When going through the pairing process, it finds and removes the previous pair. Is there a file I can rename, edit to wipe out all existing paired con...

Brettster

How does it look with Console cores and Arcade cores?

Brettster

What would be nice, if possible, for cores recently updated had some kind of marker to indicate it was new, until the next time you run update all.
The script runs so fast now you really don't get time to see what its updated. It's a pain to have to go into a log to see it.

Brettster

aliens MRA downloaded for me from update all so maybe that's fixed now

Brettster

On the actual arcade cab, Start is only used on 2 player TMNT, the 4 Player version uses a common coin chute and you press attack to start for the player of your choice, at least that's how it was set up in for the cabs we had here in the UK.

Brettster

Does this adaptor actually support more than one fire button per stick?
if you plug it into a windows PC can you use the controller test and see more buttons?

Brettster

Happy Birthday, I wonder how many Mister systems are in users hands these days?

Brettster

Just got a guncon 3 with sensors, then realised my TV's bezel is far too thin to hold the sensors! anyone figured a nice way to mount them?

Brettster

Would be nice if the 2nd SD slot could be used as extra storage and used with all cores

Brettster

I power my MiSTer, usb hub wifi, Keyboard/mouse dongle, bluetooth and 2.5 ghz controller dongle + mt33pi/oled screen with a pi3a all from a single cable when playing on X68000 with midi and a keyboard , controller etc my PSU shows the MiSTer is pulling 2.1 amps so your 3A PSU sounds beefy enough. if you decide to add in a 2.5 HDD then maybe look at...

Brettster

FatSlob71 wrote: ↑Thu Jan 20, 2022 6:14 am Brett what Font do you use in those screenshots ?

Gradius Font

Brettster

the proto works in mame, quite a lot of differences, music being of of them

Brettster

pac wrote: ↑Wed Jan 19, 2022 9:34 pm
Brettster wrote: ↑Wed Jan 19, 2022 7:26 pm bubljpn..jpg
Very nice font btw, looks like... Gradius?

Correct

, good eyes you got there!

Brettster

Ah Sorry I didnt read the bit about the alternatives, those dont work for me either

Brettster

Here are the settings I have set for my roms.
the settings are found under dip switches

Japanese Rom

: bubljpn..jpg (139.74 KiB) Viewed 21591 times

USA Rom

: bublusa.jpg (131.5 KiB) Viewed 21591 times

Brettster

The coin pulses should be the same as pushing a switch, 1 for a single coin and multiple times for a higher value coin, this will depend on how you set it up to accept coins. You should not connect the Counter to the pro Micro as this will send out 12v to power and advance a physical coin counter. To make sure it's safe, before connecting it to the...

Brettster

Did you use the core from this repository? https://github.com/MiSTer-DB9/Minimig-AGA_MiSTer As I recall correct the sounds required a special version of the core. I did try that but same result no floppy sounds :( thanks for taking the time to post the link though :) I guess as others have said, it could be something with the framework, its not ga...

Brettster

When I first got my MiSTer from Antonio I used to get floppy disk loading sounds in the Amiga Core, I've not tried the core in a while and the latest version no longer seems to have this sound.
Do I need a custom core or is there a setting I need to change in the Amiga core to get this back?

Brettster

Not sure what your problem is, but I can say that I dont have that repeating sound issue you get with the dec14 version

Brettster

there is an option in the osd for changing the rom size from 256 <> 512.
I've found that the JP roms only work with it set to 256 and the hacks and US roms etc seem to work better with the 512.
I was playing lost caves only yesterday so as long as your roms are OK you should be able to get this running too.

Brettster

https://misterfpga.co.uk/
Good service and products from here

MiSTer FPGA Forum

Search found 105 matches

Re: OpenBOR for MiSTer

Re: OpenBOR for MiSTer

Re: Any way to control Forgotten Worlds better?

Re: Any way to control Forgotten Worlds better?

Re: New Rotary Joystick From GRS in Pre-prod Testing

Re: 8bitdo controllers lose bluetooth sync after each MiSTer reboot

Re: NSO Nintendo 64 Controller Needs to Be Paired Each Time

Re: NSO Nintendo 64 Controller Needs to Be Paired Each Time

Re: NSO Nintendo 64 Controller Needs to Be Paired Each Time

NSO Nintendo 64 Controller Needs to Be Paired Each Time

Re: MiSTer with LG Dual Up 28

Re: How to Monitor update_all Changes?

Re: JT Friday May 12

Re: TMNT Core Beta Release Finally Available!

Re: How to Map Coleco Controller Buttons

Re: MiSTer is 7 Years Old!! Happy Birthday !!!

Guncon3 sensors with OLED TV?

Re: The secondary SD Card

Re: Power supply questions

Re: Bubble Bobble

Re: Bubble Bobble

Re: Bubble Bobble

Re: Bubble Bobble

Re: Bubble Bobble

Re: Coin mech and daemonbite arcade

Re: Lost Floppy Loading Sounds in Core

Lost Floppy Loading Sounds in Core

Re: Mt32-Pi Akumajou Dracula issue - comparison with an older pre-release build

Re: Bubble Bobble

Re: Where best to buy MiSTer components in UK