antoniovillena.es

[antoniovillena]

I have ordered with these files on jlcpcb.com

[VegitoXZ7]

Those files don't seem to be working with the gerber file I downloaded from your post on that forum.
Is there a different gerber file that is updated for this bom and cpl?

For clarification, I included the gerber file i downloaded from your post on the other forum. Thanks!

[antoniovillena]

Use these gerbers instead. I changed the orientation of the board

[NML32]

Can a MiSTer RTC board be installed in the Complete MiSTer DRIVE 128MB, 8GB uSD setup?

[boilop]

I was finally going to my dream MiSTer kit from you, but it seems like you only sell it with SDRAM now... (BTW, bug report: the announce still says "This kit doesn’t include DE10 nano or SDRAM module.", even though that is no longer true. Is there any chance you would consider still selling a kit without SDRAM?

[Pepeart]

Im having problems with my nes adapter. I added the 2 3.6k resistors and same problem as without resistors. What am I doing wrong? I tried the scac and db9 settings too

[antoniovillena]

Can a MiSTer RTC board be installed in the Complete MiSTer DRIVE 128MB, 8GB uSD setup?

I have not tried. Probably not. But I am developing a RTC module for my setup.

[antoniovillena]

I was finally going to my dream MiSTer kit from you, but it seems like you only sell it with SDRAM now... (BTW, bug report: the announce still says "This kit doesn’t include DE10 nano or SDRAM module.", even though that is no longer true. Is there any chance you would consider still selling a kit without SDRAM?

Yes. You are the 3rd person who ask about kit without SDRAM so I send now both options:

https://www.antoniovillena.es/store/product/kit-mister/

[antoniovillena]

Im having problems with my nes adapter. I added the 2 3.6k resistors and same problem as without resistors. What am I doing wrong? I tried the scac and db9 settings too

Are the other end of resistor tied to VCC (5V)? I don't appreciate in the picture. You have the schematic here:

https://github.com/antoniovillena/MiSTe ... db9nes.pdf

[antoniovillena]

I hope this image can help

[Pepeart]

Thats how I have it. Lower left point 5V to the 2nd and 3rd points on the second row. I ordered 3.6k 1/4 watt 5% tolerance. Did I get the correct resistors?

[antoniovillena]

Thats how I have it. Lower left point 5V to the 2nd and 3rd points on the second row. I ordered 3.6k 1/4 watt 5% tolerance. Did I get the correct resistors?

Yes. Resistors are ok. Have you trying with SNAC option on OSD, right?

[Pepeart]

Yes, I tried all 3 modes. Snac, DB9 & 15. On mode 15.

[antoniovillena]

Yes, I tried all 3 modes. Snac, DB9 & 15. On mode 15.

Try with this core and SNAC

https://github.com/MiSTer-devel/NES_MiS ... 200620.rbf

[Pepeart]

Same problem, only the A button works. All the other adapters work great.

[boilop]

Could you explain how you wire the VGA port?

1. I know that you output sound with it (since your VGA to Scart has sound), and I would like to know on which pins that is. I would like to make sure that I can use a cable like this (https://www.extron.com/product/syvgamalefibncmaleca) to go to my PVM without any trouble (I do understand that this cable wouldn't carry sound, of course).

2. An additional question about your VGA to Scart: do you have a 470 Ohm resistor on the VGA HSYNC pin when going to the scart CSYNC pin?

Thanks for your help!

[antoniovillena]

Could you explain how you wire the VGA port?

1. I know that you output sound with it (since your VGA to Scart has sound), and I would like to know on which pins that is. I would like to make sure that I can use a cable like this (https://www.extron.com/product/syvgamalefibncmaleca) to go to my PVM without any trouble (I do understand that this cable wouldn't carry sound, of course).

left channel is on pin 11, right channel is on shield

2. An additional question about your VGA to Scart: do you have a 470 Ohm resistor on the VGA HSYNC pin when going to the scart CSYNC pin?

Thanks for your help!

I don't connect hsync to sync. I do a XOR between hsync and vsync and then I put a potentiometer of 1K

[Pepeart]

The Nes Adapter its working now. Thank you for all your help Antonio.

[Squaresoft74]

I recently bought a complete MiSTer DRIVE 128MB, 8GB uSD from Antonio.
It took only 7 days to get delivered perfectly packed.
i had a minor issue with the potentiometer controlling the fan not working but he sent me a complete IOUSB replacement board in about 4 days.

Based on my own experience, i'd highly recommend this great and responsive seller.

[mahen]

Just received a new parcel from Antonio. Fast dispatch, perfect condition, some nice goodies provided (VGA -> Scart adapter). Great work, thanks again

[arcam10]

Hello Antonio, I am really interested in your "Complete MiSTer DRIVE 128MB, 8GB uSD" product! What is the difference with the SLIM edition?
Does the scart adapter in the package come with stereo sound?

[antoniovillena]

Hello Antonio, I am really interested in your "Complete MiSTer DRIVE 128MB, 8GB uSD" product! What is the difference with the SLIM edition?
Does the scart adapter in the package come with stereo sound?

The only difference is the size (DRIVE is 12mm higher) and the orientation of 2 USB connectors (DRIVE has 2 internal and 5 external USB ports).

Yes. The Scart adapter (also the cable) comes with stereo sound.

[arcam10]

Hello Antonio,
I ordered your kit, but I can't figure out the modification power button mod. Do you have additional pictures? I cannot visualize correctly the modification.

[arcam10]

Hello Antonio,

Can your confirm if i understand your power switch mod ?

Nano-10.JPG (89.46 KiB) Viewed 27984 times

Best regards,

[dshadoff]

Antonio, I received a composite adapter today, and I'm having trouble getting it past the 50% working point.
I've modified mister.ini for composite_sync=1, disabled SOG, and put the VGA header to 5V as the webpage stated.

However, the picture flashes on for about 2 seconds, then off for about 2 seconds, then back on (etc.).
This is not a characteristic of the monitor itself (a Commodore 1701) - if it lost sync, it would twist into a horizontal mess - rather, the connection/disconnection seems to be upstream at the adapter and MiSTer.

When the picture appears, it seems to have no other problems, so it is likely just a configuration option of some sort.

Do you have any suggestions on how this can be rectified ?

[mahen]

Ah, so the DRIVE version has 2 internal ports and 5 external ones instead of 7 external ports ?

The SSD is to be plugged into one of those internal USB ports and the 2nd one is for its power supply ?

OK so the DRIVE version has pros & cons... Love the SLIM version !

[gusmoney]

Same problem, only the A button works. All the other adapters work great.

I am trying to fix my NES adapter with the prescribed resistors and I am stuck at the place Pepeart describes, above.

NW6lesjm.jpg (15.02 KiB) Viewed 23193 times

What can be done here to get this adapter working'?

[Pepeart]

I had the wrong resistor values. get the following ones from ebay - item number 163295843022 just follow my soldering points

[gusmoney]

I had the wrong resistor values. get the following ones from ebay - item number 163295843022 just follow my soldering points

Thanks, ordered.

[lamarax]

Hi Antonio,

Does your VGA to SCART cable (with integrated stereo out) work with the official 6.1 I/O board?

I'm asking because the CRT I'm planning to use with my MiSTer doesn't have a separate RCA audio line in, so offers from other sellers wouldn't be compatible to my particular case.

Thanks