Not able to run anything

[Biby]

Hi guys, I'm not new in MISTer's thing but I don't consider myself an expert. Everything was fine since today, as my setup started to give me some problems. The board (DE10+128MB RAM+USB board+WIFI dongle) boots, linux part seems fine (update, OS, everything runs ok). I'm not able to run anything that involves FPGA: I launch the core, I select roms but that's it...nothing happens, just black screen. Even memtest starts but I'm not able to run it. The OS continues to respond. I've tried with a fresh start (new SD, new OS...it's the same). Any hint??

[ComfySofa]

Tried a fresh MicroSD Card?

[aberu]

Copy theypsilon's update-all to your scripts folder and run it. Sometimes the main and Linux side among other things needs to be updated properly together.

[Biby]

I've already tried with a new microsd and a fresh start (twice), just installing misterfusion and after that running mister update... Same result: I'm not able to execute anything. I've also removed SDRAM buy nothing has changed in its behavior

[Biby]

Is there any procedure to check if my board is broken?

[Newsdee]

It sounds like the FPGA isn't being programmed. What are the dip switches positions on your board? They coud be blocking programming from the SD card.

You can try using Quartus to upload an rbf via USB, or similar debugging, and if that doesnt work, contact Terasic.

Check the DE10 user manual for details on where the switches should be.

[Biby]

Switches are all in their position I've even checked them with a multimeter. I'm waiting for a USB blaster to test it like you suggested

[aberu]

Attached is a picture of the proper switch configuration for MiSTer for the top and bottom switches pictured for reference.

[Biby]

Hi Aberu, thank you very much for your reply. As I wrote they are all proper positioned and I've checked them with a multimeter. They are ok since the first day I've started use the board and everything was fine until a week ago...suddenly the board stopped to work, black screen after rom selection, Linux part is ok and completely working.

[ldeveraux]

I had the same issue. I run through the settings get everything working, then my screen goes black when I select a core or script.

edit: turns out I was only using a 1A power supply. Using a 2A PSU fixed it!

[Biby]

I'm using the original PSU that came with the kit. I've tried to change it with another one but nothing has changed. Pretty sure it's broken the board itself

[ldeveraux]

I'm using the original PSU that came with the kit. I've tried to change it with another one but nothing has changed. Pretty sure it's broken the board itself

I think I was using the original PSU as well. But if you addon anything it increases the power draw and the device just fails. Try higher power!

[Biby]

What are the specifics?

[svensonson]

same here. I just hooked up the mister for the first time in months. ran the update.sh but none of the updated cores will start. almost all are giving me a black screen. older nes, snes neo geo core releases seem to open fine. I tried to wipe the sd card and ran the update_all but still non of the updated cores will run on my mister. really strange.

[svensonson]

Alright. I got it sorted.
For some reason it kept showing me a SSL TLSV Errors during any update procedure. I did ran the security_fix.sh to make sure everyhing is up2date and disabled the firewall. I kept keeping the error with almost any update.sh I tried.
I ran the updater_pc instead and copied the files manually to my sd card. all cores are working fine now!

[aberu]

I keep a regular backup of my MiSTer games folder, saves, etc... Just because I'm a tinkerer and occasionally I have to redo my MicroSD card. Probably for the best if everyone tries to do this . Randomly stuff gets messed up and a reinstall usually fixes it for me.

[obitus1990]

Hello! I am new to the MiSTer, and seem to be having this same issue. Everything works on the linux side of things after running the install script, and I have run the update_all script. I can select cores, but, after I configure, say, the Commodore 64 Core's settings to tell it what .D64 I want it to run (which is indeed stored in a games folder), nothing happens. Black screen Same if I try with the Minimig core and others. I have read each core file's wiki on the github sub section for each, and have followed the instructions fore each, but nothing works for me. I have a 2A power supply, so I don't think that it is a power issue as others mention above.

Any ideas?

[obitus1990]

Solved my issue... after running the memtest "core" I determined my SDRAM daughter board was not being detected. Since I soldered this entire kit up myself, I went back and checked the soldering on the SDRAM board, and found about 3 leads which were not properly soldered in place. I reflowed these three joints and it now works perfectly.

[aberu]

Wow, good job!