MiSTerFPGA.co.uk

Only for official MiSTer project addon boards!
grizzly
Top Contributor
Posts: 381
Joined: Tue Jun 16, 2020 12:22 pm
Has thanked: 58 times
Been thanked: 77 times

Re: MiSTerFPGA.co.uk

Unread post by grizzly »

You mean something like this?
https://misterfpga.co.uk/blog/
mrtomato
Posts: 43
Joined: Tue Jun 23, 2020 3:47 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by mrtomato »

grizzly wrote: Tue Sep 15, 2020 7:31 am You mean something like this?
https://misterfpga.co.uk/blog/
Yeap i think he should add assembly instructions to blog. I figured how to install this additional boards, but for some this could be like building LEGO set without instructions.
johnny5
Posts: 6
Joined: Sun Jul 19, 2020 7:12 pm

Re: MiSTerFPGA.co.uk

Unread post by johnny5 »

Jusst want to say thanks for Nat at https://misterfpga.co.uk/ for helping to fix my board after I used the wrong power supply on my BliSSter. He arranged for hte replacement to come and when he sent everything back, he added in a top and bottom acrylic case, with the unit fully assembled. Excellent service!
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

I've just added a selection of MiSTer cover protection plates, low cost and perfect for protecting your MiSTer stack!

Mister-Protection-Plates.jpg
Mister-Protection-Plates.jpg (142.46 KiB) Viewed 19519 times

The MiSTer acrylic protection plates are available in a range of colours.

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

mrtomato
Posts: 43
Joined: Tue Jun 23, 2020 3:47 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by mrtomato »

Nat wrote: Thu Sep 17, 2020 1:18 pm I've just added a selection of MiSTer cover protection plates, low cost and perfect for protecting your MiSTer stack!


Mister-Protection-Plates.jpg


The MiSTer acrylic protection plates are available in a range of colours.
Good move Nat, I got green one, but if you some day add 3d printed case I also will order that :)
johhenrik
Posts: 34
Joined: Mon Aug 10, 2020 8:49 pm
Has thanked: 43 times
Been thanked: 15 times

Re: MiSTerFPGA.co.uk

Unread post by johhenrik »

I ordered a bunch of stuff (snac board, converters etc) and it was shipped quickly and packed well. I recommend buying from Nat. Quick shipping, fast email response etc.
laserface
Posts: 7
Joined: Thu Sep 17, 2020 7:32 am
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by laserface »

happy customer here, just bought a load of mister addon's (128mb ram, heat sink, usb hub, power cables etc) all arrived well packed.
mrtomato
Posts: 43
Joined: Tue Jun 23, 2020 3:47 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by mrtomato »

I also got yesterday SDRAM from Nat ;) now my setup is fully completed. I am more than a happy. I am also thinking about getting full set of SNAC, wondering only if on the future will option to have NEOGEO adapter.
Meringues
Posts: 14
Joined: Tue Aug 04, 2020 10:41 pm
Has thanked: 5 times
Been thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by Meringues »

I bought A few snac items and other accessories, great communication and service also very helpful with a couple of issues I had, I will definitely be buying from again in the near future 😁
genjurro
Posts: 6
Joined: Fri Oct 16, 2020 1:29 pm

Re: MiSTerFPGA.co.uk

Unread post by genjurro »

Ordered from France a USB Hub board, 128MB SD RAM + a bunch of "utilities" and green acid cover plates :)
Received everything very fast and all is working properly thanks !
User avatar
Alkadian
Top Contributor
Posts: 728
Joined: Thu May 28, 2020 9:55 am
Has thanked: 294 times
Been thanked: 119 times

Re: MiSTerFPGA.co.uk

Unread post by Alkadian »

Another pleasant and smooth purchase from Nat! I have ordered again from him all the components for another MiSTer setup within my Arcade Cabinet. I have got the new IO board v6.1, the SDRAM XS-D v2.5 128MB, the power supply and the WiFi adapter. Everything arrived quickly and well packed. Nat has been very kind, helpful and responded quickly, within the same day, to all my emails/requests. I will definetely buy from him in the near future. I really recommend him if you are after both great quality and excellent customer service! Thanks Nat! :)
ChrisJM
Posts: 1
Joined: Thu Nov 12, 2020 1:54 pm

Re: MiSTerFPGA.co.uk

Unread post by ChrisJM »

I've just put together my first MiSTer and ordered a USB Hub board, 128MB SD RAM and IO board v6.1 from Nat at everything arrived really fast and was well packed.

Unfortunately I had received a faulty DE10-Nano from Mouser that wouldn't read the 128MB SD RAM correctly and produced a mountain of errors in the Memtest utility. NAT very kindly helped me diagnoses the issue and even sent me out an extra 128MB SD RAM module so I could confirm the board was at fault.

After receiving a new DE10-Nano I was able to confirm both the 128MB SD RAM modules Nat sent me was 100% working!

I cant recommend Nat's products and service enough! Thank you again for all the help.
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

ChrisJM wrote: Thu Nov 12, 2020 2:13 pm Unfortunately I had received a faulty DE10-Nano from Mouser that wouldn't read the 128MB SD RAM correctly and produced a mountain of errors in the Memtest utility. NAT very kindly helped me diagnoses the issue and even sent me out an extra 128MB SD RAM module so I could confirm the board was at fault.
Excellent news that you are up and running, and can now fully enjoy your MiSTer!

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

Txamin
Posts: 9
Joined: Tue Jul 28, 2020 10:09 am
Has thanked: 7 times

Re: MiSTerFPGA.co.uk

Unread post by Txamin »

I bought pretty much all my mister parts from this seller, can't be recommended enough.
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

If you are looking for a transparent case to show off your MiSTer build I now have some available! Cases for both IO board types are available.

See here for my Acrylic cases for MiSTer

MiSTer-Case-Versions.png
MiSTer-Case-Versions.png (1.02 MiB) Viewed 18693 times
Acrylic-Case-For-MiSTer-FPGA.png
Acrylic-Case-For-MiSTer-FPGA.png (1.28 MiB) Viewed 18693 times
Acrylic-MiSTer-Case-UK.png
Acrylic-MiSTer-Case-UK.png (1.17 MiB) Viewed 18693 times
Case-For-MiSTer-FPGA.png
Case-For-MiSTer-FPGA.png (1.26 MiB) Viewed 18693 times
MiSTer-Case.png
MiSTer-Case.png (1.3 MiB) Viewed 18693 times

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

mrtomato
Posts: 43
Joined: Tue Jun 23, 2020 3:47 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by mrtomato »

Nat wrote: Sun Nov 22, 2020 6:16 pm If you are looking for a transparent case to show off your MiSTer build I now have some available! Cases for both IO board types are available.

See here for my Acrylic cases for MiSTer
Nice, this will be my next order from you. Could you tell me with what kind of Noctua fan this case is compatible?
User avatar
bazza_12
Top Contributor
Posts: 443
Joined: Sun May 24, 2020 7:49 pm
Location: Yorkshire, UK
Has thanked: 263 times
Been thanked: 121 times

Re: MiSTerFPGA.co.uk

Unread post by bazza_12 »

Nat wrote: Sun Nov 22, 2020 6:16 pm If you are looking for a transparent case to show off your MiSTer build I now have some available! Cases for both IO board types are available.
damn it.. I bought a very similar one off etsy a few months ago cost me nearly double :(
good on you though Nathan, these cases are long overdue :)
The music is reversible but time is not. Turn back. Turn back
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

mrtomato wrote: Wed Nov 25, 2020 2:01 pm Could you tell me with what kind of Noctua fan this case is compatible?
The case will fit any 40mm x 40mm x 10mm fan, the Noctua fans I use are the NF-A4x10 5 volt version.

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

Many thanks to everyone who placed an order over the Black Friday to Cyber Monday weekend, it might take me an extra day or so to catch up with shipping and packing all the orders.

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

I would just like to say a big thank you to all my customers this year, old and new!

You have all been awesome. If you are ordering MiSTer bits for Christmas delivery please see the last posting dates on my website, also the dates which I will be taking my Christmas and New Years holiday.

🎄 Christmas Delivery Information 2020 🎄

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

mrtomato
Posts: 43
Joined: Tue Jun 23, 2020 3:47 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by mrtomato »

I just another package from Misterfpga.co.uk, as always aukcji delivery and very good quality. I ordered new model of fazę and switch. Case is very good quality, but in order to screw this I nad to trim little bit of plastik key kufer ring, because when I screw it one of buttons was pushed, because one of buttons was soldered not really pretty and was rower little bit. IDK WHO manufactured my IO board, because i bought Nano and IO board as used set.

Now I am looking for buy set of SNAC adapters.

Merry Xmas.
evilpaul13
Posts: 2
Joined: Mon Dec 21, 2020 2:52 pm
Has thanked: 2 times

Re: MiSTerFPGA.co.uk

Unread post by evilpaul13 »

Does USPS do the shipping once it arrives in the US or is it a private company? I'm not exaggerating when I say that it'they're sitting on my mail longer than it has taken for things to arrive from China to my house before.
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

evilpaul13 wrote: Tue Jan 05, 2021 2:00 am Does USPS do the shipping once it arrives in the US or is it a private company?....
Sorry to hear your order has not arrived yet, your package would be delivered by USPS. If you can please use my website’s contact page and let me know your order number I can help and investigate it from there. Cheers!

MiSTer FPGA UK Contact Page

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

Weario
Posts: 17
Joined: Mon Jan 04, 2021 10:11 pm
Has thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by Weario »

I have bought my MiSTer from Nat a couple of months ago and I am very happy. Some components were in backorder, but once they arrived, they were very swift to send the package my way. Haven't had a single problem with my MiSTer to this day. Thank you!
pacoarcade
Posts: 72
Joined: Mon May 25, 2020 8:41 am
Has thanked: 75 times
Been thanked: 13 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by pacoarcade »

Amazing service from Nat. The Digital I/O Board received works perfect, and the Neptune case has surpassed my expectations. It's beautiful, solid and the acrylic oozes quality. Also, he was kind enough to send me four spacers for the USB Hub I already built saving me from another purchase.

Definitely recommended A+++.
User avatar
xtcrefugee
Posts: 19
Joined: Wed Sep 09, 2020 3:57 pm
Has thanked: 4 times

Re: MiSTerFPGA.co.uk

Unread post by xtcrefugee »

Hi Nat, do you have any plans to stock the new MT32-pi hat? https://github.com/MiSTer-devel/Hardwar ... /MT32PiHat

I've been impressed by the quality of your boards so far (I ordered a USB 2.1 hub late last year) and was hoping I'd be able to get one of these from you as well, ideally including the upper top board which acts as a surround for the little LCD.

Thanks!
User avatar
Nat
Posts: 129
Joined: Sun May 24, 2020 7:28 pm
Location: United Kingdom
Has thanked: 9 times
Been thanked: 70 times
Contact:

Re: MiSTerFPGA.co.uk

Unread post by Nat »

xtcrefugee wrote: Thu Jan 07, 2021 1:43 am Hi Nat, do you have any plans to stock the new MT32-pi hat?
Yes I certainly do, I am just waiting for the PCB's (top and bottom plates) to arrive with me, then I will produce a batch!

MiSTer FPGA Add-On Boards : UK based, low cost worldwide shipping.
https://MiSTerFPGA.co.uk/

User avatar
allyourbasekris
Posts: 79
Joined: Wed Sep 23, 2020 11:47 pm
Has thanked: 31 times
Been thanked: 45 times

Re: MiSTerFPGA.co.uk

Unread post by allyourbasekris »

Nat wrote: Fri Jan 08, 2021 8:15 pm
xtcrefugee wrote: Thu Jan 07, 2021 1:43 am Hi Nat, do you have any plans to stock the new MT32-pi hat?
Yes I certainly do, I am just waiting for the PCB's (top and bottom plates) to arrive with me, then I will produce a batch!
Oh well, who needs money anyway? Count me in.
User avatar
Alkadian
Top Contributor
Posts: 728
Joined: Thu May 28, 2020 9:55 am
Has thanked: 294 times
Been thanked: 119 times

Re: MiSTerFPGA.co.uk

Unread post by Alkadian »

@Nat,
That's cool. I can't wait for it.
Obraxis
Posts: 9
Joined: Sun May 24, 2020 7:16 pm
Been thanked: 1 time

Re: MiSTerFPGA.co.uk

Unread post by Obraxis »

Just a shout-out to Nat for the speed & quality of his products. I've build loads of MiSTers for people now and his products are the only ones which never have an issue, using consistent parts. Top bloke.
Post Reply