SNAC zapper works, controller doesn't

[yatzr]

I just got a snac recently, the one from misteraddons. And I got the hdmi/nes cable from blissbox.
I got the zapper working with light gun games. I then tried to use a controller on some different games (tried both an oem and a new 3rd party controller) and couldn't get it to work at all. I tried many combinations of settings in the Input menu for the nes core, but I assume it should be as simple as setting the serial mode to snac.
I also confirmed that the controllers work fine on an original nes.
Any ideas?

[aberu]

On the I/O board what is your jumper that is labeled (IO6) set to?

https://github.com/MiSTer-devel/Main_Mi ... Serial-IO)

The NES requires 5v, the DE10-Nano only has 3.3v, therefore your problem might be in there somewhere...

[legacypixels]

IO6 shouldn't matter for NES/SNES

[fenderc01]

I have the same issue. It looks like MisterAddons is aware of the issue.

NES OEM controllers (CURRENTLY INVESTIGATING ISSUES WITH SOME OEM NES CONTROLLERS)

https://misteraddons.com/products/seria ... erter-snac

[yatzr]

It was set to I/O. I tried changing it to 3.3v just now, but no change.
Probably worth mentioning I have a 6.1 standard IO board also from misteraddons. I checked continuity from my nes controller through the blissbox cable to the snac, and that all checked out fine.

Also, for what it's worth, I tried an snes controller through the snac on the snes core and it worked as expected.

[SegaSnatcher]

Is your NES controller NTSC or Pal region?

[yatzr]

Is your NES controller NTSC or Pal region?

Huh, I never knew there was a difference. Mine are NTSC though.