Street Fighter 1 Arcade

[Shuffle7]

Street fighter 1 Anyone else having having an issue stopped working last week or so. Use jotego update scripts and retro driven

Thanks

[ash2fpga]

If you are having issues with 48mhz sdram, it could be because of that update.

48MHz version sf
https://github.com/jotego/jtbin/commit/ ... f2c10e9f61

SDRAM test core
https://www.patreon.com/posts/sdram-test-core-45967856

[Shuffle7]

So I ran the test , got the noise , the red screen . I have a 32mb ram card I failed the test .. so what now !

[ash2fpga]

If you bought the ram addon from a seller, try reaching out to them.

[Shuffle7]

Everything seems to work fine had no issues other than sf1 suddenly not working, anyone else had any probs

[Shuffle7]

Is the JT test just for 128mb or 32 modules too? . I have the 32 sdram alliance . No problems with any other game

[ash2fpga]

Is the JT test just for 128mb or 32 modules too? . I have the 32 sdram alliance . No problems with any other game

Per the post: "Only the first 32MiB of memory are tested."

[Shuffle7]

It’s working again . Thanks Jose JT

[Shuffle7]

It’s still broken keeps crashing but fingers crossed

[Shuffle7]

Got to this screen tonight it’s the only jotego game I can’t get to work. Sometimes it loads sometimes it doesn’t get past even the capcom region screen but ultimately crashes. Do I really have to replace my 32 ram

Edit . Before it used to automatically insert a coin credit now it says insert coin again so maybe works being done sorry to be a pain but interesting all the same

[Shuffle7]

Looking at the alternatives tonight , crazy I remember the punch buttons version in the arcades .. forgot that for all this time!!
The rubber pads instead of buttons to throw punches with ... how long would those last in an arcade lol

[Shuffle7]

What’s is going wrong with this game a new ram module or mame rom
Gets so far and crashes, can see the sf updates being downloaded with update all

[Shuffle7]

Please can anyone help me this game doesn’t work I’ve explained above. Surely it can’t be do with a bad board on my mister ? Shall I try re seat , buy a new board ?

[lamarax]

Please can anyone help me this game doesn’t work I’ve explained above. Surely it can’t be do with a bad board on my mister ? Shall I try re seat , buy a new board ?

No. Jotego has broken it again!™ I'm sure it will be fixed soon, as it has been on-and-off many times already.

Don't mess with your hw; it's working fine

[Shuffle7]

Thanks , the work that’s going into this amazes me even got my girlfriend into the mister community

[jotego]

Thanks , the work that’s going into this amazes me even got my girlfriend into the mister community

If it still fails for you, I would advise getting an SDRAM replacement.

[Dacaskos]

Thanks , the work that’s going into this amazes me even got my girlfriend into the mister community

If it still fails for you, I would advise getting an SDRAM replacement.

I can't make any CPS0 game work. It shuts down the entire system and I have to reboot.

Tested both 48 and 96 for like 20 minutes to no problem.

Big Neogeo games work well too... What possibly could be happening? (CPS1 and 2 works fine)

*******NVM, really sorry for some reason the core files were corrupted...

[Shuffle7]

Thank you Jotego for the help looks like I’ll go back to the seller of the ram to see if he will check it for me.

Just to double check in case I have a dodgy core set should I remove the sf Rom files in both hbmame and mame folders and then do a update through the update_all script to get fresh rom files ?

Thanks

[XtraSmiley]

Thank you Jotego for the help looks like I’ll go back to the seller of the ram to see if he will check it for me.

Just to double check in case I have a dodgy core set should I remove the sf Rom files in both hbmame and mame folders and then do a update through the update_all script to get fresh rom files ?

Thanks

Yes, I would delete the core, the game, everything, then do an update. That has fixed problems for others (see above post) when things get messed up. Good luck and let us know how it goes!

[Shuffle7]

Have tried deleting , replacing Roms . I just can’t get SF to work. So as jotego said maybe try the sdram option. I’ve ordered replacement sdram . This time I’ve gone for 128 instead of the 32 I had . Is there anyway on mister to display the SDRAM memory you have ?

[jca]

If you mean the memory size you can see it after you boot MISTer, there is a small icon in the "title bar" of the OSD which shows a memory chip with a filled portion which indicate the size 32, 64 or 128 (1/4 filled, 1/2 filled, totally filled).

[pgimeno]

Plus, the memtest core shows the amount of RAM as a numeric code (see README.md here: https://github.com/MiSTer-devel/MemTest_MiSTer )

[Shuffle7]

That’s great thanks guys

[Shuffle7]

Thanks , the work that’s going into this amazes me even got my girlfriend into the mister community

If it still fails for you, I would advise getting an SDRAM replacement.

Installed 128 ram this time and it works !!!
Thanks jotego and everyone else for your help

[Xbytez]

I have removed a number of off topic posts in this thread, opinions are fine but please keep on topic, if anyone whose post was removed wishes to discuss further feel free to PM me.

[jotego]

Installed 128 ram this time and it works !!!
Thanks jotego and everyone else for your help

I am glad to hear that.