Controller Not Recognised

[ponder]

I just purchased a Madcatz SFIV Arcade Fightstick which has been modified with Sanwa parts.

It works fine on my Linux Desktop but isn't even registering any input on the MiSTer.
I am using the Define joystick buttons section on the main config screen first.

When I look at the system it's mounting in /dev/input/js0 but other than that it seems invisible.

[ponder]

Further information, it shows in /var/log/messages:

Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.272970] usb 1-1.7: new full-speed USB device number 9 using dwc2
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.369371] usb 1-1.7: New USB device found, idVendor=0738, idProduct=8818, bcdDevice= 1.00
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.369385] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.369392] usb 1-1.7: Product: PC USB Wired Stick 8818
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.369399] usb 1-1.7: Manufacturer: MadCatz
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382837] HID usage: 0x00010005, original interval: 10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382855] JS: endpoint->bInterval=10, interval=10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382860] HID usage: 0x00010005, applied interval: 10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382866] HID usage: 0x00010005, original interval: 10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382869] JS: endpoint->bInterval=10, interval=10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.382873] HID usage: 0x00010005, applied interval: 10
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.383174] input: MadCatz PC USB Wired Stick 8818 as /devices/platform/soc/ffb40000.usb/usb1/1-1/1-1.7/1-1.7:1.0/00038818.0009/input/input17
Mar 2 21:59:27 MiSTer user.info kernel: [ 2332.386825] hid-generic 00038818.0009: input,hidraw3: USB HID v1.10 Gamepad [MadCatz PC USB Wired Stick 8818] on usb-ffb40000.usb-1.7/input0

[bUd1oo]

I know this is an older post...

I have the same stick (8818, PS3 Version). Wanted to use it with RetroPie when I got it. Back then it didn't work. Had to use
https://github.com/karlvr/MadCatz2Jstick

Maybe there is a way to make it work in MiSTer as well?

[bUd1oo]

Little update:

I "modded" my stick by putting one of those "zero delay usb encoders" in it. It was easy enough for me to do and it works great.

[MunkyBunky]

I have a Madcatz Xbox Street Fighter Edition and even though it worked with a Raspberry Pi I could not get it working with the Mister FGPA.

I tried everything then I decided to try a different power supply.

I bought off Amazon a 5v 3a supply and then it burst in to life.

This is the one I purchased

https://www.amazon.co.uk/gp/product/B09WXSG546/