My Mister works perfectly with NG roms (Darksoft set) loaded from SD, but if I put them on external USB (USB 3.0 NTFS 2TB Toshiba Canvio Basics HDTB420EK3AA via external USB 2.0 powered hub) I can see "games\Neogeo" on the USB, but if I click a game folder nothing happens (looks like the folder is empty).
If I navigate back to SD and launch a game the rom is loaded but graphics is garbled (look like video is missing a "layer", like no sprites, garbled backgrounds and such).
If I power off Mister and remove the USB drive, everything goes back working fine from SD.
I have a 128mb memory module and memtest is ok @140.
I ran "update" and "update_all" scripts with no benefit.
Other cores works fine both from USB (i.e. MegaCD) and SD (i.e. Arcades).
Any hint? Is NTFS the problem?
NeoGeo and USB Issues [Solved]
-
jca
- Top Contributor
- Posts: 1911
- Joined: Wed May 27, 2020 1:59 pm
- Has thanked: 145 times
- Been thanked: 454 times
Re: NeoGeo and USB issues
Ditch NTFS and switch to exFAT. NTFS is case sensitive and causes a lot of problems, don't ask how I know. For example for NeoGeo the name of the folder should be NEOGEO but the update script creates it as NeoGeo. At one point I had NEOGEO and NeoGeo directories with NEOGEO containing the roms and NeoGeo empty. I looked at the drive under Windows which sees the 2 directories but when I open NeoGeo it had all the roms and backing up one directory the highlighted directory was NEOGEO.
When using a USB drive do not use ext4 or NTFS but stick to exFat, it will save you a lot of headaches.
When using a USB drive do not use ext4 or NTFS but stick to exFat, it will save you a lot of headaches.
Re: NeoGeo and USB issues
Ok,
I formatted in exFAT, and put:
-a game (bin+cue uncompressed folder) in TGFX16-CD folder; source: Redump
-a game in uncompressed folder into NeoGeo folder; source: Darksoft
-the same game as above in single *.neo file format into NeoGeo folder; source: everdrive Mister Pack
Result:
-selecting the game folder it looks like it is loading then get a "bios not found" error
-looks like the folder is empty
-games load but graphics is garbled
If a move the folders\rom onto SD, changing nothing, everything works like a charm.
Ideas? I'm clueless. ^_^'
I formatted in exFAT, and put:
-a game (bin+cue uncompressed folder) in TGFX16-CD folder; source: Redump
-a game in uncompressed folder into NeoGeo folder; source: Darksoft
-the same game as above in single *.neo file format into NeoGeo folder; source: everdrive Mister Pack
Result:
-selecting the game folder it looks like it is loading then get a "bios not found" error
-looks like the folder is empty
-games load but graphics is garbled
If a move the folders\rom onto SD, changing nothing, everything works like a charm.
Ideas? I'm clueless. ^_^'
-
FPGA64
- Top Contributor
- Posts: 940
- Joined: Mon Mar 01, 2021 3:10 pm
- Has thanked: 49 times
- Been thanked: 375 times
Re: NeoGeo and USB issues
I ran into a similar problem with a CIFS share
I found that I had to have the exact same setup on the share as I had on the SD card. Ie the Xml files and the bios files on the share and in the same relative directories or nothing loaded. As soon as I had the same set up on the share it worked. This may help you on your USB issue.
I found that I had to have the exact same setup on the share as I had on the SD card. Ie the Xml files and the bios files on the share and in the same relative directories or nothing loaded. As soon as I had the same set up on the share it worked. This may help you on your USB issue.