Please give some suggestions for my new MiSTer Daughter Board
-
- Posts: 32
- Joined: Tue Aug 25, 2020 3:10 pm
- Has thanked: 1 time
- Been thanked: 6 times
Please give some suggestions for my new MiSTer Daughter Board
Today, I successfully powered up the newly designed 5CSEBA6U23 core board. And the new core board's top and bottom images are attached. Two AS4C32M16SBs, 1GB DDR3 memory, RGMII ETH PHY and 85 FPGA GPIOs from PL side....
Now I'm thinking of design a daughter board for this core board. Preliminary, below interfaces will be added:
(1)ADV7513 HDMI display. Takes 35 FPGA GPIOs
(2)4-port USB hub for HPS
(3)RJ45 for HPS Ethernet communication
(4)Micro-SD card for HPS
So the core board still have 50 FPGA IOs left for other interfaces. My preference is not to have the VGA interface for CRT monitor since this kind of monitor is really hard to find in the market..... Please Mister fans here kindly give some suggestions for the remaining 50 FPGA IOs, Thanks.
- Attachments
-
- QQ图片20210414111442.jpg (3.92 MiB) Viewed 2309 times
-
- QQ图片20210414111435.jpg (1.34 MiB) Viewed 2309 times
Re: Please give some suggestions for my new MiSTer Daughter Board
Look like a new board to me. Any reason why you want to call it MiSTer? I guess a little more background info would help.
-
- Core Developer
- Posts: 49
- Joined: Tue Jul 07, 2020 8:19 am
- Has thanked: 14 times
- Been thanked: 20 times
Re: Please give some suggestions for my new MiSTer Daughter Board
Please put only the basic needed stuff on the first pcb, the boards are easily stackable with this layout and all other stuff can be put on addon pcbs.
So only sdcard, hdmi, network, usb, audio (i2s, toslink, headers or 3.5mm) and maybe a audio in channel for tape. Spare as many pins as possible for debugging output and things like snac or a video dac.
PS: love the qmtech boards, no nonsense and a really useful pinout
So only sdcard, hdmi, network, usb, audio (i2s, toslink, headers or 3.5mm) and maybe a audio in channel for tape. Spare as many pins as possible for debugging output and things like snac or a video dac.
PS: love the qmtech boards, no nonsense and a really useful pinout
- aberu
- Core Developer
- Posts: 1192
- Joined: Tue Jun 09, 2020 8:34 pm
- Location: Longmont, CO
- Has thanked: 247 times
- Been thanked: 411 times
- Contact:
Re: Please give some suggestions for my new MiSTer Daughter Board
What happened to the top of your SoC?
As for feedback:
Main priorities for me personally would be the USER IO port (which is analog pins direct to FPGA I believe, and either digital or analog audio pins for a combo Mini-TOSLINK+3.5mm jack Optical+DAC.
As for feedback:
Main priorities for me personally would be the USER IO port (which is analog pins direct to FPGA I believe, and either digital or analog audio pins for a combo Mini-TOSLINK+3.5mm jack Optical+DAC.
birdybro~