Thanks for all the work on the C64

Post Reply
FPGA64
Top Contributor
Posts: 937
Joined: Mon Mar 01, 2021 3:10 pm
Has thanked: 49 times
Been thanked: 374 times

Thanks for all the work on the C64

Unread post by FPGA64 »

Thank you for all the work on the C64 Core.

I tested the G64 support and it works on protected disks such as Wizball. So its a great start. The C64 holds a special place in my heart and to see the work being poured into it is very gratifying.

Thanks Sorg
Top
J3RK
Posts: 82
Joined: Tue Jun 02, 2020 3:11 pm
Has thanked: 30 times
Been thanked: 22 times

Re: Thanks for all the work on the C64

Unread post by J3RK »

Hear hear!!

I use the C64 and PC Engine cores the most, and both are tip top!
Top
jalbarracin
Posts: 75
Joined: Fri Apr 02, 2021 9:11 pm
Has thanked: 3 times
Been thanked: 15 times

Re: Thanks for all the work on the C64

Unread post by jalbarracin »

TRULY THANKS!!! Do you know If there is a donate link?
Top
dshadoff
Core Developer
Posts: 547
Joined: Sun May 24, 2020 9:30 pm
Has thanked: 20 times
Been thanked: 145 times

Re: Thanks for all the work on the C64

Unread post by dshadoff »

jalbarracin wrote: ↑Thu Jun 17, 2021 11:32 pm TRULY THANKS!!! Do you know If there is a donate link?
For Sorgelig (who has been doing all the recent C-64 work):
https://patreon.com/FPGAMiSTer
Top
Xbytez
Site Admin
Posts: 479
Joined: Wed May 20, 2020 3:36 pm
Has thanked: 227 times
Been thanked: 805 times

Re: Thanks for all the work on the C64

Unread post by Xbytez »

jalbarracin wrote: ↑Thu Jun 17, 2021 11:32 pm TRULY THANKS!!! Do you know If there is a donate link?
If you just wish to make a single donation, you can use Paypal. The below link is for donating directly to Sorgelig:

https://www.paypal.me/FPGAMiSTer
Top
jalbarracin
Posts: 75
Joined: Fri Apr 02, 2021 9:11 pm
Has thanked: 3 times
Been thanked: 15 times

Re: Thanks for all the work on the C64

Unread post by jalbarracin »

Great info I just sent him a donation <3
Xbytez wrote: ↑Thu Jun 17, 2021 11:58 pm
jalbarracin wrote: ↑Thu Jun 17, 2021 11:32 pm TRULY THANKS!!! Do you know If there is a donate link?
If you just wish to make a single donation, you can use Paypal. The below link is for donating directly to Sorgelig:

https://www.paypal.me/FPGAMiSTer
Top
User avatar
FatSlob71
Posts: 101
Joined: Tue Oct 13, 2020 10:11 am
Has thanked: 27 times
Been thanked: 12 times

Re: Thanks for all the work on the C64

Unread post by FatSlob71 »

Yeah this core is becoming almost as Good as Ultimate64 Elite Board i have except the lack of 2 Sid Slots :)
Top
User avatar
Chris23235
Top Contributor
Posts: 982
Joined: Sun May 24, 2020 8:45 pm
Has thanked: 127 times
Been thanked: 197 times

Re: Thanks for all the work on the C64

Unread post by Chris23235 »

FatSlob71 wrote: ↑Fri Jun 18, 2021 5:29 am Yeah this core is becoming almost as Good as Ultimate64 Elite Board i have except the lack of 2 Sid Slots :)
Aren't there 2 SIDs already present in the C64 core?
Top
mahen
Posts: 185
Joined: Sun May 24, 2020 8:25 pm
Has thanked: 19 times
Been thanked: 6 times

Re: Thanks for all the work on the C64

Unread post by mahen »

There are tons of sound options already : left & right SIDs, OPL 2 sound expander, filters, digimax :)

I love the work done on this core too ! Thank you, Sorge !
Top
User avatar
tontonkaloun
Posts: 354
Joined: Sun May 24, 2020 7:38 pm
Has thanked: 153 times
Been thanked: 52 times

Re: Thanks for all the work on the C64

Unread post by tontonkaloun »

Yes, a very big thank you !
This core reaches perfection
Top
User avatar
NML32
Posts: 298
Joined: Sun May 24, 2020 6:57 pm
Has thanked: 301 times
Been thanked: 51 times

Re: Thanks for all the work on the C64

Unread post by NML32 »

Thank you, the Commodore 64 core is my favorite core on the MiSTer.
Top
User avatar
TLPD-AVW
Posts: 107
Joined: Sat Jul 11, 2020 9:59 am
Has thanked: 18 times
Been thanked: 42 times

Re: Thanks for all the work on the C64

Unread post by TLPD-AVW »

G64 support is a great new feature. I wanted to play the original NTSC version of Master of the Lamps as I found most cracked versions imperfect in some ways, and they are usually based on PAL cassette releases. I converted a .nib image to .g64 and, lo and behold, it works perfectly on MiSTer!
Many thanks for recent updates.
Top
mr_mr_mr
Posts: 14
Joined: Thu Apr 01, 2021 12:15 pm
Been thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by mr_mr_mr »

So much yes. C64 core was awesome but lately it has got even better. I am very happy! Thank you so much!
Top
User avatar
wark91
Core Developer
Posts: 334
Joined: Sun May 24, 2020 8:34 pm
Has thanked: 447 times
Been thanked: 95 times

Re: Thanks for all the work on the C64

Unread post by wark91 »

Thank you !
Top
User avatar
Alkadian
Top Contributor
Posts: 728
Joined: Thu May 28, 2020 9:55 am
Has thanked: 294 times
Been thanked: 119 times

Re: Thanks for all the work on the C64

Unread post by Alkadian »

A huge thanks from me as well!
Top
User avatar
zeen
Posts: 20
Joined: Sun May 24, 2020 8:49 pm
Has thanked: 3 times
Been thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by zeen »

Thank you !
Top
shertz
Posts: 147
Joined: Sun May 24, 2020 8:12 pm
Has thanked: 15 times
Been thanked: 27 times

Re: Thanks for all the work on the C64

Unread post by shertz »

Big thanks!! I love the C64!!
Top
Lencio
Posts: 14
Joined: Mon May 25, 2020 11:21 am
Been thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by Lencio »

Thanks, the SID implementation is much better than Ultimate64 Ultisids. Incredible!
Top
User avatar
Darthcustom
Posts: 37
Joined: Thu Aug 06, 2020 6:40 pm
Has thanked: 4 times
Been thanked: 7 times

Re: Thanks for all the work on the C64

Unread post by Darthcustom »

Best Core ever!!! Long live for C64!!!
Top
antoniovillena
Posts: 140
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 49 times

Re: Thanks for all the work on the C64

Unread post by antoniovillena »

Thanks for the core. The 1541 support is awesome
Attachments
photo_2021-06-29_17-00-34.jpg
photo_2021-06-29_17-00-34.jpg (43.08 KiB) Viewed 15948 times
photo_2021-06-29_17-00-25.jpg
photo_2021-06-29_17-00-25.jpg (91.52 KiB) Viewed 15948 times
Top
rcade
Posts: 119
Joined: Wed May 27, 2020 7:57 pm
Has thanked: 1 time
Been thanked: 17 times

Re: Thanks for all the work on the C64

Unread post by rcade »

Are there schematics/plans for that disk/tape adapter you are using?
Top
antoniovillena
Posts: 140
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 49 times

Re: Thanks for all the work on the C64

Unread post by antoniovillena »

rcade wrote: ↑Tue Jun 29, 2021 6:26 pm Are there schematics/plans for that disk/tape adapter you are using?
My pcbs are closed but It's based on the table "USER_IO pins" on this readme:

https://github.com/MiSTer-devel/C64_MiSTer/

I only have added two edges (user and tape edge) for power the SD2IEC
Top
rcade
Posts: 119
Joined: Wed May 27, 2020 7:57 pm
Has thanked: 1 time
Been thanked: 17 times

Re: Thanks for all the work on the C64

Unread post by rcade »

antoniovillena wrote: ↑Tue Jun 29, 2021 8:44 pm
rcade wrote: ↑Tue Jun 29, 2021 6:26 pm Are there schematics/plans for that disk/tape adapter you are using?
My pcbs are closed but It's based on the table "USER_IO pins" on this readme:

https://github.com/MiSTer-devel/C64_MiSTer/

I only have added two edges (user and tape edge) for power the SD2IEC
I just ordered one (and am MT-32 adapter) from your site, but then I realized... What does that cable plug into on the MiSTer? It looks like I need another adapter to get to the DB9?
Top
antoniovillena
Posts: 140
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 49 times

Re: Thanks for all the work on the C64

Unread post by antoniovillena »

rcade wrote: ↑Wed Jun 30, 2021 1:00 pm I just ordered one (and am MT-32 adapter) from your site, but then I realized... What does that cable plug into on the MiSTer? It looks like I need another adapter to get to the DB9?
Just cancelled the order. Please read the description:

"Note: Only for DB9 MiSTer (SLIM, DRIVE and MINI). For official MiSTer please wait to other sellers.

This device interconnects the MiSTer FPGA to a real Commodore 1541 disk drive. Also compatible with drive emulators like SD2IEC. To provide power to SD2IEC there are two edge connectors: user port and tape port.

Can be connected directly to the DB9 port, but optionally I sell with a DB9 extender cable."
Top
rcade
Posts: 119
Joined: Wed May 27, 2020 7:57 pm
Has thanked: 1 time
Been thanked: 17 times

Re: Thanks for all the work on the C64

Unread post by rcade »

My mistake.
Top
turnerja
Posts: 3
Joined: Wed Sep 30, 2020 2:02 pm
Has thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by turnerja »

This is now a great core! Thanks for all the hard work in making this fantastic.
I'm wondering if any of the work on the C64 core easily transfers to some of the other Commodore cores?
Top
User avatar
Sorgelig
Site Admin
Posts: 890
Joined: Thu May 21, 2020 9:49 pm
Has thanked: 2 times
Been thanked: 214 times

Re: Thanks for all the work on the C64

Unread post by Sorgelig »

What thing can be transferred?
Some enhancements of C1541 can be used in which i plan to do.
Top
DoubleA
Posts: 45
Joined: Sat Dec 26, 2020 8:11 am
Been thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by DoubleA »

Sorgelig wrote: ↑Thu Jul 01, 2021 5:42 pm What thing can be transferred?
Scaling algo PAL/NTSC to Vic20 core. C64 scaling on Full-HD HDMI is fine now (again), Vic20 scaling in PAL mode is still off (like C64 before the much welcomed improvements).
Top
User avatar
Sorgelig
Site Admin
Posts: 890
Joined: Thu May 21, 2020 9:49 pm
Has thanked: 2 times
Been thanked: 214 times

Re: Thanks for all the work on the C64

Unread post by Sorgelig »

VIC20 has variable position of screen, so it's much harder to accomplish without accidentally cut the useful video.
Top
DoubleA
Posts: 45
Joined: Sat Dec 26, 2020 8:11 am
Been thanked: 1 time

Re: Thanks for all the work on the C64

Unread post by DoubleA »

Sorgelig wrote: ↑Sat Jul 03, 2021 5:45 pm VIC20 has variable position of screen, so it's much harder to accomplish without accidentally cut the useful video.
Well yes, but you already did a great job with NTSC on the Vic. Just PAL mode is missing the final touch :-).
Top
Post Reply

Return to “Commodore 16, 64, 128, VIC-20, PET”