A couple of questions on the Sharp MZ core

[OldBoar]

I am using the Sharp MZ core (dated 21.07.09) in the Sharp MZ-80K configuration, using the SP-1002 monitor ROM and BASIC SP-5025 from a .mzf file.

1. I cannot find the cursor keys. I found the SML/CAP key (Backspace), the INS/DEL key (Caps Lock), the CLR/HOME key (Tab) and the BREAK key (the key above Tab, left of 1), but no trace of the cursor keys.

2. If I save a BASIC program, it replies with "WRITING filename" and "READY" without error message, but I cannot find the .mzf file anywhere.

Any help would be appreciated.

[alanswx]

I am using the Sharp MZ core (dated 21.07.09) in the Sharp MZ-80K configuration, using the SP-1002 monitor ROM and BASIC SP-5025 from a .mzf file.

1. I cannot find the cursor keys. I found the SML/CAP key (Backspace), the INS/DEL key (Caps Lock), the CLR/HOME key (Tab) and the BREAK key (the key above Tab, left of 1), but no trace of the cursor keys.

2. If I save a BASIC program, it replies with "WRITING filename" and "READY" without error message, but I cannot find the .mzf file anywhere.

Any help would be appreciated.

The writing might be broken in the MiSTer binary. Interesting, send me a list of Sharp MZ basic commands and I will see if I can reproduce it.

[OldBoar]

The writing might be broken in the MiSTer binary. Interesting, send me a list of Sharp MZ basic commands and I will see if I can reproduce it.

1) This is just a keyboard problem, I just cannot find the cursor keys. I did find all the other keys.

sharp_mz-80k-keyboard.jpg (75.68 KiB) Viewed 4556 times

2) I wrote a short BASIC program, and tried to save it:

10 PRINT "TEST"
RUN
TEST
READY
SAVE "TEST"
WRITING TEST
READY

Thanks for looking into this.

[alanswx]

The writing might be broken in the MiSTer binary. Interesting, send me a list of Sharp MZ basic commands and I will see if I can reproduce it.

1) This is just a keyboard problem, I just cannot find the cursor keys. I did find all the other keys.

2) I wrote a short BASIC program, and tried to save it:

10 PRINT "TEST"
RUN
TEST
READY
SAVE "TEST"
WRITING TEST
READY

Thanks for looking into this.

The keymap seems to be in a ROM file as binary unfortunately. That will make it a bit harder to fix. We should probably make a more mister-like keymap where we have a switch with the ps2 codes and then map them into the Sharp MZ matrix. I think it makes sense to just map quote to quote, instead of shift-2 like the original. Some of the cores have an option to switch between them.

How do i get into Basic? I tried running these commands and I couldn't get it to print "test". Also, In the author's docs it save is crossed out. I am not sure why it doesn't work. A lot of code seems to be in the FPGA side and the MiSTer binary. I turned debug on in the mister binary to see if it is trying to write anything, but I don't know how to get into basic.

Thanks!

[jca]

You have to load BASIC from tape.

[alanswx]

I think -/_ is one of the arrows (up).

How do I load the tape in basic to see if it works? I think I know why the file isn't writing, but I would like to see if this file is correct.

[alanswx]

oops.. it works! Let me work out a better patch. It is now putting the file in the saves directory with .sav instead of .mzf

[alanswx]

Try this binary:

MiSTer.zip

(579.88 KiB) Downloaded 230 times

[jca]

I think -/_ is one of the arrows (up).

How do I load the tape in basic to see if it works? I think I know why the file isn't writing, but I would like to see if this file is correct.

You have to find a MZ-700 archives which contains Games, Applications, Firmware. One application is BASIC Interpreter 1Z-013B v1.0 (1983)(Sharp Corp).mzf which you load with the fast tape load and execute by jumping at the address provided by the tape loader.

[alanswx]

Try this binary:MiSTer.zip

This saved from basic for me and dumps it in the top level of the sharpmz game folder.

[OldBoar]

Try this binary:

MiSTer.zip

Thanks!

I downloaded and installed your archive but it did not change anything, I still cannot find the file (searched using both F12 and F9).

I guess I am doing something wrong. I was a bit surprised you posted a new MiSTer file, I had expected a SharpMZ.rbf file.

I think -/_ is one of the arrows (up).

No, that just gives me a - sign.

How do I load the tape in basic to see if it works? I think I know why the file isn't writing, but I would like to see if this file is correct.

This is what I use:
Machine: MZ80K
Monitor SP-1002 ROM: https://www.sharpmz.no/dl/download.php?file=80KMONI.zip
European version of the character ROM: https://www.sharpmz.no/dl/download.php?file=80KCG.zip
BASIC SP-5025 tape: https://www.sharpmz.no/dl/download.php?file=sp-5025.zip

Loading BASIC from tape:
** MONITOR SP-1002 **
*LOAD (Queue .mzf file using F12 menu.)
LOADING BASIC SP-5025
* SHARP BASIC SP-5025
34680 BYTES
READY

Loading tape in BASIC:
LOAD
or
LOAD "filename"

[alanswx]

Try this binary:MiSTer.zip

Thanks!

I downloaded and installed your archive but it did not change anything, I still cannot find the file (searched using both F12 and F9).

I guess I am doing something wrong. I was a bit surprised you posted a new MiSTer file, I had expected a SharpMZ.rbf file.

I think -/_ is one of the arrows (up).

No, that just gives me a - sign.

How do I load the tape in basic to see if it works? I think I know why the file isn't writing, but I would like to see if this file is correct.

This is what I use:
Machine: MZ80K
Monitor SP-1002 ROM: https://www.sharpmz.no/dl/download.php?file=80KMONI.zip
European version of the character ROM: https://www.sharpmz.no/dl/download.php?file=80KCG.zip
BASIC SP-5025 tape: https://www.sharpmz.no/dl/download.php?file=sp-5025.zip

Loading BASIC from tape:
** MONITOR SP-1002 **
*LOAD (Queue .mzf file using F12 menu.)
LOADING BASIC SP-5025
* SHARP BASIC SP-5025
34680 BYTES
READY

Loading tape in BASIC:
LOAD
or
LOAD "filename"

I have:

/media/fat/games/sharpmz/

I loaded basic from a folder in the sharpmz
wrote a basic program, and saved it:
SAVE "ALAN"
and it put ALAN.mz into /media/fat/games/sharpmz/

[OldBoar]

Try this binary:MiSTer.zip

Thank you, I got saving to work using your file.

This is truly awesome.

The keymap seems to be in a ROM file as binary unfortunately. That will make it a bit harder to fix. We should probably make a more mister-like keymap where we have a switch with the ps2 codes and then map them into the Sharp MZ matrix. I think it makes sense to just map quote to quote, instead of shift-2 like the original. Some of the cores have an option to switch between them.

Since the MZ series has such peculiar keyboards, having options would certainly be nice.