What power supply for this setup?
-
- Posts: 7
- Joined: Sun Jan 17, 2021 3:32 pm
- Has thanked: 1 time
What power supply for this setup?
-
- Posts: 36
- Joined: Wed Sep 16, 2020 11:42 am
- Been thanked: 10 times
Re: What power supply for this setup?
Re: What power supply for this setup?
Think I got mine from Nat, no problem whatsoever using it for powering my MiSTer and MT32-Pi
Re: What power supply for this setup?
AS above, just make sure you get at least 4 amps.
5V is mandatory, more amps than 4 is fine and will just give you more headroom for plugged in devices drawing power, but you want at least 4 amps.
Re: What power supply for this setup?
Do higher powered/better power supplies send more power to hdmi? I'm using Misteraddons active Y/C adapter with unpowered hdmi to vga adapters, Triad 4 amp power supply for de-10 nano/analogue IO board, and original de-10 nano power supply for usb hub. I get horizontal flicking noises on darker colors but noises are gone when I connect them to powered hdmi splitter so I'm thinking maybe hdmi is not getting enough power from Mister. Hdmi splitter is unusable though because it cause massive syncing problem.
Re: What power supply for this setup?
KennyL wrote: ↑Sat Dec 30, 2023 8:31 pmDo higher powered/better power supplies send more power to hdmi? I'm using Misteraddons active Y/C adapter with unpowered hdmi to vga adapters, Triad 4 amp power supply for de-10 nano/analogue IO board, and original de-10 nano power supply for usb hub. I get horizontal flicking noises on darker colors but noises are gone when I connect them to powered hdmi splitter so I'm thinking maybe hdmi is not getting enough power from Mister. Hdmi splitter is unusable though because it cause massive syncing problem.
Power supplies don’t really “send” power so much as devices “take” power. Given an (imaginary) infinite-amps power supply, each device will take what it needs. So, as long as the PSU has enough amps, then more amps won’t make a difference. (This is an oversimplified version, as I’m ignoring that the closer you get to a PSU’s max current output, the less efficient it gets.)