Cannot boot after upgrade

Kernel, Main, Utilities & Applications, Miscellaneous Devices.
fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Cannot boot after upgrade

Unread post by fatterdude2000 »

After upgrade I cannot boot mister. Power light is on but leds do not light up and no hdmi signal. I have 128 ram , digital io and the usb addon.

I have tried 2 different sd cards. I did a complete reinstall with mr fusion 2.3 image and it boots as normal. I can connect to wifi and even power off and on at this stage. Once I run update script that comes with mr fusion 2.3 it downloads the structure and everything seems to work fine... that is until I power cycle and then I'm back at square 1.

I have tried copying latest Mister and menu.rbf from github but problem continues. I've disconnected all usb devices but still same problem.

I also tried with "update_all" script on one attempt , again that seems to work. It downloads a tonne of stuff and my mister is operational... until I power off and on again.

P.S. What is the prefered update script (update.sh as installed with the mr fusion 2.3 image or update_all.sh?

Thanks in advance (this is driving me mad ;) )
fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Re: Cannot boot after upgrade

Unread post by fatterdude2000 »

Reverted to release 20210711. Boots fine. Update using downloader.sh this time (why not , tried update.sh and update_all.sh before). Seems to update ok but as soon as a power cycle it doesn't boot again and no leds light up.

I'll give up for now and stick with 20210711 unless anyone knows what's going wrong. I don't think my setup is unusual. digital io board 1.2, usb hub 2.1 , sdram 128MB, sandisk 256GB (also tried integral 256GB which was my original and working fine for months before latest update). Retro gaming is hard work :?
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

Could you share one of the following logs? (Or both if you have them)
- /media/fat/Scripts/.config/update_all/update_all.log after running update_all
- /media/fat/Scripts/.config/downloader/downloader.log after running downloader

Are you running the CIFS script?
adimifus
Posts: 19
Joined: Mon May 25, 2020 3:10 am
Has thanked: 1 time

Re: Cannot boot after upgrade

Unread post by adimifus »

I'm having the exact same problem. All I do is install using Mr. Fusion 2.3, run wifi.sh to connect to wifi, run update.sh to update. Works fine until power cycle, then nothing. I can repeat this over and over (and have done so while attempting to figure out what's going on) with the same results. Power cycling after a fresh install works fine, it's only AFTER updating that it won't boot after a power cycle.

Here's my update.log:

Code: Select all

MiSTer Updater version 4.0.17
started at Sat 11 Dec 2021 05:39:22 AM UTC

Successfully updated cores:
release_20211112.7z, MiSTer_20211127, menu_20210315.rbf, Archie_20210724.rbf, AcornAtom_20201229.rbf, AliceMC10_20210116.rbf, Altair8800_20181113.rbf, Minimig_20210705.rbf, Amstrad_20210227.rbf, Amstrad-PCW_20200830.rbf, ao486_20211010.rbf, Apogee_20201210.rbf, Apple-I_20190812.rbf, Apple-II_20211018.rbf, MacPlus_20210324.rbf, Aquarius_20210303.rbf, Atari800_20210228.rbf, AtariST_20210724.rbf, BBCMicro_20210302.rbf, BK0011M_20210302.rbf, CoCo2_20210122.rbf, C16_20210719.rbf, C64_20211025.rbf, PET2001_20210228.rbf, VIC20_20210731.rbf, UK101_20211126.rbf, PDP1_20190101.rbf, EDSAC_20200513.rbf, Galaksija_20200504.rbf, Interact_20210815.rbf, Jupiter_20210303.rbf, Laser310_20200701.rbf, MSX_20210227.rbf, MultiComp_20210113.rbf, PMD85_20210910.rbf, Ondra_SPO186_20211022.rbf, ORAO_20200309.rbf, Oric_20210920.rbf, RX78_20210706.rbf, SAMCoupe_20210226.rbf, SharpMZ_20210709.rbf, QL_20210404.rbf, SordM5_20211109.rbf, Specialist_20210303.rbf, Svi328_20210510.rbf, Ti994a_20210829.rbf, TRS-80_20200618.rbf, TSConf_20210302.rbf, Vector-06C_20210302.rbf, X68000_20211210.rbf, ZX-Spectrum_20210803.rbf, ZXNext_20210409.rbf, ZX81_20210228.rbf, Astrocade_20210303.rbf, Atari2600_20210228.rbf, Atari5200_20210228.rbf, Atari7800_20211128.rbf, AtariLynx_20211024.rbf, AY-3-8500_20210205.rbf, ColecoVision_20210225.rbf, Arcadia_20211026.rbf, ChannelF_20211026.rbf, Gameboy_20211121.rbf, GBA_20211201.rbf, Genesis_20211126.rbf, Intellivision_20211025.rbf, SMS_20210930.rbf, MegaCD_20211126.rbf, NeoGeo_20211126.rbf, NES_20211126.rbf, Odyssey2_20210530.rbf, SNES_20211126.rbf, TurboGrafx16_20211126.rbf, VC4000_20211026.rbf, Vectrex_20210303.rbf, WonderSwan_20210625.rbf, Arduboy_20210113.rbf, Chess_20200827.rbf, Chip8_20200208.rbf, EpochGalaxyII_20200818.rbf, FlappyBird_20200402.rbf, GameOfLife_20200430.rbf, TomyScramble_20200724.rbf, memtest_20210130.rbf, ADCTest_20201231.rbf, InputTest_20211127.rbf, Arkanoid_20211010.rbf, Arkanoid (JP).mra, Arkanoid (US).mra, Arkanoid (Unl. Lives, slower) [hb].mra, Arkanoid (Unl. lives) [hb].mra, Arkanoid (W).mra, Asteroids_20201217.rbf, Asteroids.mra, AsteroidsDeluxe_20201217.rbf, Asteroids Deluxe.mra, AtariTetris_20210405.rbf, Tetris (Cocktail, Set 1).mra, Tetris.mra, Bagman_20211114.rbf, Bagman.mra, Botanic (English, Spanish, Set 1).mra, Pickin'.mra, Squash.mra, Super Bagman.mra, Astrocade_20210707.rbf, Extra Bases.mra, Gorf (Program 1).mra, Gorf (Speech).mra, Gorf.mra, Sea Wolf II.mra, Space Zap.mra, The Adventures of Robby Roto!.mra, Wizard of Wor (Speech).mra, Wizard of Wor.mra, MCR1_20210820.rbf, Kick-Man.mra, Kick.mra, Solar Fox.mra, MCR2_20210114.rbf, Domino Man.mra, Kozmik Krooz'r.mra, Satan's Hollow (Set 1).mra, Tron.mra, Two Tigers (Tron Conversion).mra, Wacko.mra, MCR3_20210112.rbf, Discs of Tron.mra, Journey.mra, Tapper (Budweiser, 840127).mra, Timber.mra, MCR3Mono_20210114.rbf, Demolition Derby (MCR-3 Mono Board Version).mra, Max RPM (v2).mra, Power Drive.mra, Rampage (Rev 3, 860827).mra, Sarge.mra, Star Guards.mra, MCR3Scroll_20210111.rbf, Crater Raider.mra, Spy Hunter.mra, Turbo Tag (Prototype).mra, Berzerk_20211009.rbf, Berzerk.mra, BlackWidow_20210915.rbf, Black Widow.mra, Gravitar (Ver 3).mra, Lunar Battle (Prototype).mra, BombJack_20210915.rbf, Bomb Jack.mra, Breakout_20210620.rbf, Breakout (TTL).mra, BurgerTime_20210915.rbf, Burger Time (Set 1).mra, BurningRubber_20211116.rbf, Burnin' Rubber.mra, CanyonBomber_20201218.rbf, Canyon Bomber.mra, Cave_20210920.rbf, DoDonPachi (Arrange).mra, DoDonPachi (Japan).mra, DoDonPachi.mra, Centipede_20210227.rbf, Centipede (Rev 3).mra, Centipede (Rev 4).mra, ComputerSpace_20210113.rbf, Computer Space.mra, CrazyBalloon_20210115.rbf, Crazy Balloon.mra, CrazyClimber_20210614.rbf, Crazy Climber.mra, CrazyKong_20210127.rbf, Big Kong.mra, Crazy Kong (Kyoei).mra, Crazy Kong (Orca bootleg).mra, Crazy Kong Part II (Set 1).mra, Donkey Kong (Spanish Crazy Kong bootleg).mra, Defender_20211007.rbf, Colony 7 (Set 1).mra, Defender (Red Label).mra, Jin.mra, Mayday (Set 1).mra, DigDug_20210920.rbf, Dig Dug (Rev 2).mra, Dominos_20201217.rbf, Dominos.mra, DonkeyKong_20211126.rbf, Donkey Kong (US, Set 1).mra, Pest Place.mra, Radar Scope.mra, DonkeyKong3_20210312.rbf, Donkey Kong 3 (US).mra, DonkeyKongJunior_20210922.rbf, Donkey Kong Junior (US, Set F-2).mra, DottoriKun_20210705.rbf, Dottori-Kun (new).mra, Dottori-Kun (old).mra, Dottori-Man Jr.mra, Finalizer_20211025.rbf, Finalizer - Super Transformation (Set 1).mra, Finalizer - Super Transformation (Set 2) [bl].mra, Finalizer - Super Transformation (Set 2).mra, FoodFight_20210115.rbf, Food Fight (Rev 3).mra, Frenzy_20211009.rbf, Frenzy (Rev RA1).mra, Galaga_20210916.rbf, Galaga (Midway, Set 1).mra, Galaxian_20210920.rbf, Azurian Attack.mra, Black Hole.mra, Catacomb.mra, Clean Sweep.mra, Devil Fish (Galaxian Hardware).mra, Galaxian (Namco, Set 1).mra, King And Balloon (Japan).mra, King and Balloon (US).mra, Lucky Today.mra, Moon Cresta (Galaxian Hardware) [bl].mra, Mr. Do Nightmare.mra, Omega [bl].mra, Orbitron.mra, Pisces.mra, UniWar S.mra, Victory.mra, War of the Bugs.mra, Gaplus_20210611.rbf, Galaga 3 (GP3 Rev D).mra, Gaplus (GP2 Rev B).mra, Gauntlet_20210426.rbf, Gauntlet (rev 14).mra, Gauntlet II.mra, Vindicators Part II (rev 3).mra, Gyruss_20211024.rbf, Gyruss.mra, IremM62_20210925.rbf, Horizon (Irem).mra, Kid Niki - Radical Ninja (W).mra, Kung-Fu Master (W).mra, Lode Runner (Set 1).mra, Lode Runner II - The Bungeling Strikes Back.mra, Lode Runner III - The Golden Labyrinth.mra, Lode Runner IV - Teikoku Karano Dasshutsu (JP).mra, Spelunker II - 23 no Kagi (JP).mra, Spelunker.mra, The Battle-Road.mra, Youjyuden (JP).mra, IronHorse_20210928.rbf, Iron Horse (Ver. K).mra, Jackal_20211001.rbf, Jackal (W) [bl].mra, Jackal (W).mra, Jackal (W, Rotary).mra, Tokushu Butai Jackal (JP).mra, Top Gunner (US) [bl].mra, Top Gunner (US).mra, Jailbreak_20211004.rbf, Jailbreak.mra, Manhattan 24 Bunsyo (J).mra, LadyBug_20210927.rbf, Cosmic Avenger.mra, Dorodon (Set 1).mra, Lady Bug.mra, Snap Jack.mra, LunarLander_20210111.rbf, Lunar Lander.mra, MarioBros_20210925.rbf, Mario Bros. (US, Rev G).mra, MoonPatrol_20211101.rbf, Moon Patrol.mra, MrDo_20210919.rbf, Mr. Do! Fixed.mra, Mr. Do!.mra, NinjaKun_20210929.rbf, Ninjakun.mra, Pacman_20210915.rbf, Ali Baba and 40 Thieves.mra, Beastie Feastie (Pac-Man Conversion).mra, Birdiy.mra, Crush Roller (Set 2).mra, Dream Shopper.mra, Eeek! (Pac-Man Conversion).mra, Eggor.mra, Eyes (US, Set 1).mra, Gorkans.mra, Jump Shot.mra, Lizard Wizard.mra, Mr. TNT.mra, Ms. Pac-Man.mra, Pac-Man (Midway).mra, Pac-Man Club- Club Lambada (AR).mra, Pac-Man Plus.mra, Pac-Manic Miner.mra, Ponpoko.mra, Puck Man (JP, Set 1).mra, Super Glob (Pac-Man, German) [bl].mra, The Glob (Pac-Man Hardware).mra, Van-Van Car.mra, Woodpecker (Set 1).mra, Pengo_20210917.rbf, Pengo (Set 1, Rev C).mra, Phoenix_20210915.rbf, Phoenix (Amstar, Set 1).mra, Pleiads (Tehkan).mra, Pleiads_20210524.rbf, Pleiads (Centuri).mra, Pleiads.mra, PolyPlay_20210322.rbf, Poly Play 2.mra, Poly Play 2c.mra, Poly Play.mra, Pong_20210117.rbf, Pong (Rev E).mra, Pooyan_20210929.rbf, Pooyan.mra, Popeye_20210117.rbf, Popeye (Rev D).mra, Sky Skipper.mra, QBert_20210923.rbf, Mad Planets.mra, Q'bert (US, Set 1).mra, QBert Qubes.mra, RiverPatrol_20210111.rbf, River Patrol (JP, Unprotected).mra, RallyX_20210922.rbf, New Rally-X.mra, Rally-X (32k Ver).mra, Robotron_20211007.rbf, Alien Arena (Stargate upgrade).mra, Bubbles.mra, Joust.mra, Playball (Prototype).mra, Robotron 2084.mra, Sinistar.mra, Splat!.mra, Stargate.mra, RshnAtk_20210924.rbf, Green Beret.mra, Mr. Goemon.mra, Rush'n Attack (US).mra, ScooterShooter_20211004.rbf, Scooter Shooter.mra, Scramble_20210915.rbf, Amidar (Scramble).mra, Anteater.mra, Armored Car.mra, Battle of Atlantis.mra, Calipso.mra, Dark Planet (no bkg).mra, Dark Planet.mra, Frogger (Konami Bugfixed).mra, Frogger (Sega, Set 2).mra, Lost Tomb.mra, Mars.mra, Mighty Monkey (Scramble Hardware) [bl].mra, Minefield.mra, Moon War.mra, Rescue.mra, Scramble (Stern, Set 1).mra, Speed Coin.mra, Strategy X.mra, Super Cobra.mra, Tazz-Mania (Set 1).mra, The End (bkg).mra, The End.mra, Turtles.mra, SEGASYS1_20210618.rbf, 4D Warriors (315-5162).mra, Block Gal.mra, Bull Fight (315-5056).mra, Flicky (128k Version, 315-5051).mra, I'm Sorry (US, 315-5110).mra, Mister Viking (315-5041).mra, My Hero (US, not Encrypted).mra, Pitfall II.mra, Rafflesia (315-5162).mra, Regulus (315-5033, Rev A).mra, Sega Ninja (315-5102).mra, Spatter (315-5xxx).mra, Star Jacker (alt).mra, Star Jacker.mra, Swat (315-5048).mra, TeddyBoy Blues (315-5115, New Ver).mra, Up'n Down.mra, Water Match (315-5064).mra, Wonder Boy (Set 1, 315-5177).mra, SMS_20210930.rbf, Astro Flash (Japan).mra, Fantasy Zone II - The Tears of Opa-Opa.mra, Hang On Jr.mra, Opa Opa (Rev A, unprotected).mra, Opa Opa.mra, Riddle of Pythagoras (Japan).mra, Slap Shooter.mra, Tetris (Japan, System E).mra, Transformer.mra, SilverLand_20210111.rbf, Silver Land.mra, SolomonsKey_20210116.rbf, Solomon no Kagi (JP).mra, Solomon's Key.mra, SpaceInvaders_20211201.rbf, 280Z-ZZAP (US).mra, Amazing Maze.mra, Attack Force.mra, Balloon Bomber.mra, Blue Shark.mra, Boot Hill.mra, Clowns.mra, Cosmo.mra, Galaxy Wars (Universal, Set 1).mra, Gun Fight.mra, Laguna Racer.mra, Lunar Rescue.mra, Lupin III (Set 2).mra, Sea Wolf (Set 1).mra, Shuffleboard.mra, Space Chaser.mra, Space Encounters.mra, Space Invaders (Samples).mra, Space Invaders Part II (Taito, Bigger ROMs).mra, Space Invaders.mra, Vortex.mra, SpaceRace_20210228.rbf, Space Race [TTL].mra, Sprint1_20201210.rbf, Sprint 1.mra, Sprint2_20201210.rbf, Sprint 2.mra, SuperBreakout_20201210.rbf, Super Breakout (Rev 04).mra, Tecmo_20200810.rbf, Gemini Wing.mra, Rygar.mra, Silkworm.mra, TIAMC1_20210322.rbf, Billiard.mra, Gorodki.mra, Konek Gorbunok.mra, Kot-Rybolov.mra, S.O.S..mra, Snezhnaja Koroleva.mra, TimePilot_20211024.rbf, Time Pilot.mra, TimePilot84_20211024.rbf, Time Pilot '84 (Set 1).mra, Time Pilot '84 (Set 2).mra, Time Pilot '84 (Set 3).mra, Druaga_20210610.rbf, Dig Dug II (New Ver).mra, Grobda (W, New Ver.).mra, Mappy (US).mra, Motos.mra, Pac & Pal.mra, Pac-Man & Chomp Chomp.mra, Super Pac-Man.mra, The Tower of Druaga.mra, TraverseUSA_20201213.rbf, Shot Rider (B-Board 89624B-1).mra, Traverse USA- Zippy Race (US).mra, Ultratank_20211118.rbf, Ultra Tank.mra, Cosmic_20211002.rbf, Cosmic Alien.mra, Magical Spot.mra, Space Panic.mra, VBall_20210621.rbf, V'Ball (US) [bl].mra, V'Ball (US).mra, Xevious_20210915.rbf, Xevious.mra, Zaxxon_20210915.rbf, Future Spy.mra, Super Zaxxon.mra, zaxxon.mra, ZigZag_20210117.rbf, Zig Zag (Dig Dug Conversion) [bl].mra

Error updating these cores:
none

Successfully updated additional files:
MRA-Alternatives_20211008.zip, Filters_20210926.zip, bluetooth_forget_all_pairings.sh, bluetooth_pair.sh, change_ini_properties.sh.inc, change_ini_property.sh.inc, cifs_mount.sh, cifs_umount.sh, core_manager.sh, firewall_off.sh, firewall_on.sh, ftp_off.sh, ftp_on.sh, gdrive.sh.inc, gdrive_config_download.sh, gdrive_config_upload.sh, gdrive_saves_download.sh, gdrive_saves_upload.sh, ini_settings.sh, mac_address_change.sh, rclone.sh.inc, rclone_config_download.sh, rclone_config_upload.sh, rclone_saves_download.sh, rclone_saves_upload.sh, reboot.sh, rtc.sh, samba_off.sh, samba_on.sh, security_fixes.sh, ssh_off.sh, ssh_on.sh, timezone.sh, video_mode_ntsc_pal_off.sh, video_mode_ntsc_pal_on.sh, video_settings_compatibility.sh, video_settings_optimal.sh, midilink_updater.sh, soundfont_install.sh, gog-broken-romsets.xml, gog-romsets.xml, romsets.xml, change_hostname.sh, fast_USB_polling_off.sh, fast_USB_polling_on.sh, mra_rom_check.sh, wifi.sh, xow_off.sh, xow_on.sh, xow_pairing.sh, mister_fds_20211112.zip, mister_gb_20211128.zip, mister_gbc_20211112.zip, mister_gen_20211203.zip, mister_gg_20211201.zip, mister_nes_20211211.zip, mister_pce_20211207.zip, mister_sms_20211112.zip, mister_snes_20211209.zip, mister_gba_20211209.zip, mister_pcd_20211112.zip

Error updating these additional files:
none
EDIT: I took a look at the files I backed up from the SD card when I reinstalled, and the last time I updated was November 30, and it more-or-less shows the same as what I posted above. Nothing under "Error updating these..." in any log files.
User avatar
_paul_
Posts: 66
Joined: Mon Aug 31, 2020 4:44 pm
Has thanked: 11 times
Been thanked: 19 times

Re: Cannot boot after upgrade

Unread post by _paul_ »

Yea, very frustrating. Ran into the same issues. Last time I was able to get it working again by replacing the main MiSTer file and menu.rfb. This time that no longer worked. What I did to get a working system back was

1) Use the Mister SD Card utility to update system files _> working but old setup
2) Setup, install and run the MiSTer downloader
adimifus
Posts: 19
Joined: Mon May 25, 2020 3:10 am
Has thanked: 1 time

Re: Cannot boot after upgrade

Unread post by adimifus »

OK, so right now I have it booting again with the 20210917 bootloader and everything else latest-- performed a full update using scripts, system hangs at boot, ran the SD Card Utility within the 20210917 release and did "Update Boot", system boots fine again. I've also set update_linux = 'false' in downloader.ini.

Are there any downsides to running it this way? What's different between the 20210917 bootloader and the latest 20211112 bootloader? (obviously something changed that my de10 nano doesn't like)
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

adimifus wrote: Sun Dec 12, 2021 6:14 am OK, so right now I have it booting again with the 20210917 boot and everything else latest-- performed a full update using scripts, system hangs at boot, ran the SD Card Utility within the 20210917 release and did "Update Boot", system boots fine again. I've also set update_linux = 'false' in downloader.ini.

Are there any downsides to running it this way? What's different between the 20210917 boot and the latest 20211112 boot? (obviously something changed that my de10 nano doesn't like)
In your case you were running the old updater, where the black screen issue is not fixed. You should run the downloader instead, never update.sh

You should be able to update Linux without problem with the downloader. Let me know if that helps.
User avatar
Ryuoken
Posts: 23
Joined: Mon Aug 24, 2020 9:36 am
Has thanked: 25 times
Been thanked: 9 times

Re: Cannot boot after upgrade

Unread post by Ryuoken »

I'm also having the same issue, tried with multiple SD cards and setups.

If I start with mister fusion everything works well until I update (updater.sh). After the update If I reebot MISTer i no longer get video from HDMI.
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

In short, there is a problem in update.sh that is solved in downloader.sh
Please, use downloader.sh
adimifus
Posts: 19
Joined: Mon May 25, 2020 3:10 am
Has thanked: 1 time

Re: Cannot boot after upgrade

Unread post by adimifus »

theypsilon wrote: Sun Dec 12, 2021 2:01 pmIn your case you were running the old updater, where the black screen issue is not fixed. You should run the downloader instead, never update.sh

You should be able to update Linux without problem with the downloader. Let me know if that helps.
No updater script works for me. I've tried update.sh, update_all.sh and downloader.sh, the latest version of each. Updating via PC using release_20211112.7z doesn't work either.
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

adimifus wrote: Sun Dec 12, 2021 8:09 pm
theypsilon wrote: Sun Dec 12, 2021 2:01 pmIn your case you were running the old updater, where the black screen issue is not fixed. You should run the downloader instead, never update.sh

You should be able to update Linux without problem with the downloader. Let me know if that helps.
No updater script works for me. I've tried update.sh, update_all.sh and downloader.sh, the latest version of each. Updating via PC using release_20211112.7z doesn't work either.
Could you please share the log when you run downloader.sh or update_all.sh ?

Downloader log is found at: /media/fat/Scripts/.config/downloader/downloader.log
Update All log is found at: /media/fat/Scripts/.config/update_all/update_all.log

We will most probably find the root cause over there
adimifus
Posts: 19
Joined: Mon May 25, 2020 3:10 am
Has thanked: 1 time

Re: Cannot boot after upgrade

Unread post by adimifus »

theypsilon wrote: Sun Dec 12, 2021 8:13 pmCould you please share the log when you run downloader.sh or update_all.sh ?

Downloader log is found at: /media/fat/Scripts/.config/downloader/downloader.log
Update All log is found at: /media/fat/Scripts/.config/update_all/update_all.log

We will most probably find the root cause over there
Ok I just did a fresh install using Mr. Fusion 2.3, ran wifi.sh, renamed _samba.sh to samba.sh, power cycled (no problem), copied downloader.sh to mister, ran downloader.sh, system hangs on power cycle.
Attachments
downloader.7z
(144 KiB) Downloaded 251 times
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

adimifus wrote: Sun Dec 12, 2021 8:57 pm Ok I just did a fresh install using Mr. Fusion 2.3, ran wifi.sh, renamed _samba.sh to samba.sh, power cycled (no problem), copied downloader.sh to mister, ran downloader.sh, system hangs on power cycle.
By looking your log file I didn't see anything weird. Then I've tried to do the exact same steps 2 times without issues (well, except running wifi.sh cause I don't have a working dongle). Could you try to do the setup in another SD card and report back?
I'm sorry that you are having problems, but with your collaboration we might be able to find solutions that would work for more people in the future.
adimifus
Posts: 19
Joined: Mon May 25, 2020 3:10 am
Has thanked: 1 time

Re: Cannot boot after upgrade

Unread post by adimifus »

theypsilon wrote: Mon Dec 13, 2021 12:07 amBy looking your log file I didn't see anything weird. Then I've tried to do the exact same steps 2 times without issues (well, except running wifi.sh cause I don't have a working dongle). Could you try to do the setup in another SD card and report back?
I'm sorry that you are having problems, but with your collaboration we might be able to find solutions that would work for more people in the future.
I've tried on two different SD cards, both with the same results. It's honestly not a huge deal since it can be apparently fixed by writing the 20210917 bootloader. I'm curious what was changed in the bootloader though, and if running an older version will have any adverse side effects.
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

I don't know what changed in the bootloader, maybe Sorg could help you wth that, but if you get always the same error with any SD, it could mean that there is some hardware problem in your setup.
Jlz
Posts: 39
Joined: Sat Aug 07, 2021 8:49 am
Has thanked: 21 times
Been thanked: 6 times

Re: Cannot boot after upgrade

Unread post by Jlz »

I've never had any problems with my MiSTer or with Update_all, but tonight I ran update_all, and when it was finished it restarted and now I just get a blank screen.

I don't have a desktop pc so I'm pretty limited in what I can do from home, so I guess I'll have to bring my SD card to a friends house and load an older version somehow? Or will I need to format the card and start again?
theypsilon
Scripting Wizard
Posts: 106
Joined: Sun May 24, 2020 8:20 pm
Been thanked: 41 times

Re: Cannot boot after upgrade

Unread post by theypsilon »

Jlz wrote: Mon Dec 13, 2021 9:59 pm I've never had any problems with my MiSTer or with Update_all, but tonight I ran update_all, and when it was finished it restarted and now I just get a blank screen.

I don't have a desktop pc so I'm pretty limited in what I can do from home, so I guess I'll have to bring my SD card to a friends house and load an older version somehow? Or will I need to format the card and start again?
The quick fix would be, downloading the files from here:
https://github.com/MiSTer-devel/Distrib ... ain/MiSTer
https://github.com/MiSTer-devel/Distrib ... n/menu.rbf

And put them in the root of your SD replacing the old ones.

There is a small chance this doesn't work still. I'd recommend to format the card in that case.

On top of all of that, you (and everyone else) should activate the new downloader. Following video shows how to do it: https://twitter.com/josembarroso/status ... 98277?s=20

This problem is fixed when you activate that.
User avatar
_paul_
Posts: 66
Joined: Mon Aug 31, 2020 4:44 pm
Has thanked: 11 times
Been thanked: 19 times

Re: Cannot boot after upgrade

Unread post by _paul_ »

[*]
Jlz wrote: Mon Dec 13, 2021 9:59 pm

I don't have a desktop pc so I'm pretty limited in what I can do from home, so I guess I'll have to bring my SD card to a friends house and load an older version somehow? Or will I need to format the card and start again?
If you do that you also need a PC? Of course starting from scratch will probably do the job but you could also use the MiSTer SD Card Utility to just update boot + files.

That may well get you a working system (it did for me). After that use the Downloader script to update (not the update_all script).
DoubleA
Posts: 45
Joined: Sat Dec 26, 2020 8:11 am
Been thanked: 1 time

Re: Cannot boot after upgrade

Unread post by DoubleA »

theypsilon wrote: Thu Dec 16, 2021 3:15 pm
There is a small chance this doesn't work still. I'd recommend to format the card in that case.
You don't need to format, it's enough if you use "MiSTer SD Card Utility.exe" and write boot + files to your mSD.
But you have to use an older version e.g. release_20210917.

And the chance you have to do that is a rather big "small" :-).
Jlz
Posts: 39
Joined: Sat Aug 07, 2021 8:49 am
Has thanked: 21 times
Been thanked: 6 times

Re: Cannot boot after upgrade

Unread post by Jlz »

Thanks for the input. In the end I used a friend's PC and did the actions in these posts:

viewtopic.php?f=29&t=3708

viewtopic.php?f=29&t=3247

And now it all works fine again.
fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Re: Cannot boot after upgrade

Unread post by fatterdude2000 »

It's been a while but I am stuck again. When I boot mister there is no activity from the leds and no hdmi signal detected.

As before I can revert to the image dated 20210711. Works.

However, I cannot update. Seems latest downloaders use Python which isn't in the 20210711 build and therefore error. I tried manually copying the MiSTer_20220511 (and renaming). The reset and user leds light up when booting but still no HDMI signal detected.

Other than a secondary 128MB ram card (has been working for months) , my setup is per original post: digital io board 1.2, usb hub 2.1 , sandisk 256GB

Any suggestions please?

fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Re: Cannot boot after upgrade

Unread post by fatterdude2000 »

further info:
I reset everything, used mr fusion 2.7. After mr fusion completed, it restarted automatically and I could see the menu as expected. However after I switched off and back on I am back without HDMI signal being detected, leds on de nano and off. I repeated, this time with mr fusion 2.6 and same problem.

fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Re: Cannot boot after upgrade

Unread post by fatterdude2000 »

wasn't taking notes but seems that my de nano doesn't play nicely with latest boot file later than release_20200122

I'm been mucking about for hours trying to get this working again, here are the rough steps (I wasn't taking notes and largely just retrying things multiple times) I took to get to working state:

  1. Had first tried to just reflash with sd card utility with boot only update but this made no difference this time
  2. Backup games
  3. Run mr fusion 2.7. This worked until cold boot where no hdmi signal detected...
  4. Ran sd utitlity and reflashed boot and linux files
  5. Used the update script , again, after cold boot there was no hdmi signal detected...
  6. use sd utitlity and reflash boot and linux files
  7. copy update_all.sh and ran, again after cold boot there was no hdmi signal detected but this time...
  8. Copied Mister and menu.rbf from 20200122 did the trick (did not use sd card utility this time) tried a few arcade games and working
  9. Currently restoring from step 2,... this is going to take a couple of hours. Fingers crossed!

All this to get outrun :-)

If anyone has any idea why boot fails with later versions I would love to avoid this time eater next time :D

djmerl
Posts: 2
Joined: Sun Jul 26, 2020 9:58 pm

Re: Cannot boot after upgrade

Unread post by djmerl »

Hi there,
I am glad I found this thread. My setup is experiencing very similar issues to those described here. Hopefully we can find out why. For whatever reason, my MiSTer won't boot with any version more recent than 20210917. Things I have tried:

Fresh install with Mr. Fusion 2.7. Initial setup screen appears, but there is no activity after the auto-reboot.

Fresh install with the SD Card Installer. If I use 20210917, this will boot. Once I run downloader or update_all, I receive a successful message, wait for it to reboot, and there is no response after.

I have tried manually copying the linux folder from the corresponding install to no avail. Flashing the bootloader or bootloader + files with the corresponding SD Card Installer yields no change.

If I flash 20221224 with the bootloader + files for 20210917, it will boot again.

I have tried this with a 400GB and a 64GB SanDisk

Any help would be appreciated, I have been stuck at 20210917 for as long as it has been released. I have attached a log if that helps anyone.

Attachments
update_all.log
(4.06 KiB) Downloaded 156 times
djmerl
Posts: 2
Joined: Sun Jul 26, 2020 9:58 pm

Re: Cannot boot after upgrade

Unread post by djmerl »

djmerl wrote: Tue Apr 18, 2023 6:37 am

Hi there,
I am glad I found this thread. My setup is experiencing very similar issues to those described here. Hopefully we can find out why. For whatever reason, my MiSTer won't boot with any version more recent than 20210917. Things I have tried:

Fresh install with Mr. Fusion 2.7. Initial setup screen appears, but there is no activity after the auto-reboot.

Fresh install with the SD Card Installer. If I use 20210917, this will boot. Once I run downloader or update_all, I receive a successful message, wait for it to reboot, and there is no response after.

I have tried manually copying the linux folder from the corresponding install to no avail. Flashing the bootloader or bootloader + files with the corresponding SD Card Installer yields no change.

If I flash 20221224 with the bootloader + files for 20210917, it will boot again.

I have tried this with a 400GB and a 64GB SanDisk

Any help would be appreciated, I have been stuck at 20210917 for as long as it has been released. I have attached a log if that helps anyone.

I have found a solution to get everything up to current:

1.Full install with SD card utility version release_20221224
2.Drop back to just boot loader for release_20210917 (sd card utility)
3.run update_all -> reboot

Not sure why it worked, but it did, and I am stoked. Shoutouts to theypsilon and the community.

fatterdude2000
Posts: 12
Joined: Sun May 24, 2020 11:08 pm

Re: Cannot boot after upgrade

Unread post by fatterdude2000 »

Thanks djmerl release_20210917 seems to contain the latest uboot.img that works for me. However if I use the uboot.img in later releases I get a boot loop:

U-Boot SPL 2017.03+ (Dec 24 2022 - 15:55:06) Trying to boot from MMC1
U-Boot 2017.03+ (Dec 24 2022 - 15:55:06 +0800)
Watchdog enabled DRAM: 1 GiB

.. and then repeats every 40 seconds or so

So, although I can currently use latest MiSTer and menu.rbf in release_20230501, I cannot use the uboot.img in that release.

For now, that's fine. It doesn't stop me using latest cores. However, based on my earlier tests with release_20200122, there will come a time where we cannot boot with the latest framework.

It seems to me, the root issue is the uboot.img. I found this:

viewtopic.php?t=638#p4390

It says uboot.img compilation is sensitive to gcc version, describing issue I and others are reporting here. However, based on other posts I have seen, and given not everyone affected, it seems to be a combination of this and DE10 revision (mine is revision c). Unfortunately the above post links to an old page, and does not state specific gcc version. I did try the steps in the MiSTer Bible , but it resulted in same results as the official release.

I'm hoping someone with more skill and knowledge can identify the "best" gcc compiler to use that works for us all. It appears to have been a problem for a number of years, albeit not all units and sometimes the same symptoms end up being bad SD's or whatever (I have tried several SD cards, and 2 different units with same results). At present, uboot.img in release_20210917 is the latest I can use.

DoubleA
Posts: 45
Joined: Sat Dec 26, 2020 8:11 am
Been thanked: 1 time

Re: Cannot boot after upgrade

Unread post by DoubleA »

You are not alone, same problem (and hope) here ...

User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: Cannot boot after upgrade

Unread post by neogeo81 »

DoubleA wrote: Wed Aug 02, 2023 4:42 am

You are not alone, same problem (and hope) here ...

Same problem a year later???

DoubleA
Posts: 45
Joined: Sat Dec 26, 2020 8:11 am
Been thanked: 1 time

Re: Cannot boot after upgrade

Unread post by DoubleA »

Nope, same problem since a year!

Post Reply