UltimateMiSTer.com

[rhester72]

@rickdangerous Will it be available in black as well?

[rickdangerous]

@rickdangerous Will it be available in black as well?

Yes sure. We have already made several design improvements since first version. Have one reserved for you as we talked before.

[rickdangerous]

10 units of new MT32Pi Lite on sale today, more 100 full units on next days.

Tomorrow will be introduced an amazing SEGA SATURN Deamonbite Dual Player.

[rickdangerous]

IMG_4400.jpeg (55.46 KiB) Viewed 15513 times

New shinny Dual Player Saturn Deamonbite introduced today.

USB-C cable included. https://ultimatemister.com/product/ulti ... ga-saturn/

[rickdangerous]

Some improvements made in the new MT32Pi Lite, including Single sided aluminum 1.6mm PCB used as heatsink, rubber protection on the back to avoid scratches on official case, 3mm Thermal-right brand used as thermal pad on the Quad-core 64-bit Cortex SOC for better hot dissipation and OC performance. SDCard pre-configured with lots of free sound fonts included. Ready, Plug and Play.

Produced in Black or White with black screws to match the design of the official stormtrooper case.

https://ultimatemister.com/product/mt32 ... or-mister/

PiZeroW.jpeg (2.98 MiB) Viewed 15263 times

[rickdangerous]

More stock of full MT32Pi lite available and new DIY KITS MT32-lite introduced, includes all necessary parts pre-installed for self build.

NEW MT32-Lite DIY KIT:
3 PCB with necessary resistors and connector INSTALLED, thermal tape, rubber back protection and soldering pins (between boards and Pi). Not included the PiZeroW2 and SDCard. Soldering required.

https://ultimatemister.com/product/mt32 ... e-diy-kit/

[Stupid Dufus]

Might want to update the DIY KIT description to avoid confusion at https://ultimatemister.com/product/mt32 ... e-diy-kit/

Disclaimer at the top has "Not included the PiZeroW2 and SDCard. Soldering required."

But later on in the description has "This is a simplified version of MT32-pi board and includes a Raspberry Pi Zero 2W."

[rickdangerous]

Might want to update the DIY KIT description to avoid confusion at https://ultimatemister.com/product/mt32 ... e-diy-kit/

Disclaimer at the top has "Not included the PiZeroW2 and SDCard. Soldering required."

But later on in the description has "This is a simplified version of MT32-pi board and includes a Raspberry Pi Zero 2W."

Thanks for the note. Fixed!

[pippuz]

Ricardo Saraiva @rickdangerous always the top.
Bought dual ram kit, analog device and pi32 lite and all goes perfect.
I am going to upgrade also my second build.

[akeley]

Got 2 questions:
-is there any way to pay that does not involve Paypal?
-when buying analogue I/O, there's an option for "stock fan" or "no fan and no ADC". Is it not possible to have just ADC and no fan?

[rickdangerous]

Hello sure, all is possible. Just pm or send me an email to sales@retroshop.pt
Regarding the ADC I usually send them as gift, but mention that in the mail that I include one.

Regards
Ricardo

[akeley]

Thanks for the prompt& positive reply Ricardo, I'll be in touch soon.

[rhester72]

This is grossly overdue on my part (I've been doing business with Ricardo for almost a year now I think!), but he has been absolutely amazing with both sales and support in every way and continues to offer very unique parts and solutions not available anywhere else. He will customize nearly anything you want in any (reasonable LOL) way you want, will assist with troubleshooting to the point of near pain on his part *laughs*, and ships AMAZINGLY fast. Truly can't say enough good things about him - thank you for everything, Ricardo!

[rickdangerous]

New add-ons coming next week including MiSTer Full setups and ZX Next / N-GO Computers.
Today new stock of MT32 lite and Triple Core Deamonbites.

100 new Spinners in productions for next weeks.

[rickdangerous]

New stock of full setups (Blisster today and all other models next days), deamonbite, MT32 lite and ZX Next / NGO. Available today.

[rickdangerous]

New Arcade Joysticks DB9, Black and Translucent black available today.

Full stock of MISTers Full setup available.

[rickdangerous]

New Dual Player PCENGINE / TURBOGRAFX-16 Deamonbite Introduced today.

PCENGINE / TURBOGRAFX-16

PCENGINE.png (1.71 MiB) Viewed 13878 times

[H3ML5XLAXBKU]

Just wanted to say thanks.
I ordered a case with usb hub and a digital IO board. It all arrived safely today and everything works great.

[rickdangerous]

Just wanted to say thanks.
I ordered a case with usb hub and a digital IO board. It all arrived safely today and everything works great.

Thank you for your support.
Keep safe, Enjoy MiSTer,
Ricardo

[lamarax]

Olá Ricardo!

Have you given a look at blue212's new PSX SNAC board?

Being utterly inept at assembling such a contraption on my own, I wish you could maybe take up producing these (for us in EU countries)

[rickdangerous]

Boards in production. Pm me soon for your unit

[Vara]

Like everyone else, I can only concur with what has been written. After getting my Ultimate MiSTer, I travelled back in time to my childhood. Ricardo is a great guy. He is reachable even after purchase, so you can rest assure that everything will go smoothly if you do business with him!

Thanks Ricardo!

[rickdangerous]

Full stock of complete MT32-pi Lite back in stock. White and black editions available.

[rickdangerous]

Full stock of MiSTers (Full setups, Digital and Analog), new Deamonbites, MiSTer Kits and many more.

New batch of Spinners next week.

[Esoteric_rt]

Just a note to thank Ricardo for helping me with an issue last night,

My parts from Ultimate Mister arrived, I connected the SDRAM, Analog I/O board and USB Hub - the system would not power on. Ricardo responded immediately and assisted with trouble shooting. The cause was a faulty ADC mini board attached to the IO board. Once that was removed the Mister worked fine. I just need a case plate which covers the vacant ADC section (as I'll probably never use it).

Great service!

[rickdangerous]

Just a note to thank Ricardo for helping me with an issue last night,

My parts from Ultimate Mister arrived, I connected the SDRAM, Analog I/O board and USB Hub - the system would not power on. Ricardo responded immediately and assisted with trouble shooting. The cause was a faulty ADC mini board attached to the IO board. Once that was removed the Mister worked fine. I just need a case plate which covers the vacant ADC section (as I'll probably never use it).

Great service!

All shipped. included new side plate that you optionally can cover the ADC port hole if you wont use it.

[rickdangerous]

Today: new SNES deamonbites available.

[djpoppy]

Today: new SNES deamonbites available.

Hi Ricardo! I'm a new Italian user and can't send pm yet. How can I contact you to queue for an order?

[rickdangerous]

We have email geral@retroshop.pt
Tickets on site
or you can contact us by commercial WhatsApp / Telegram / Phone : +351924314187

KInd regards
Ricardo

[djpoppy]

Thanks you very much Ricardo. I will contact you immediately on Whatsapp.