MiSTer was working perfectly fine. I decided to run Update_All and that completed fine and rebooted.
I was back into the script menu when my cat decided to jump onto me and I ran a random script by accident. I'm 90% sure it was called "video_settings_optimal". It completed before I knew what was going on and all seemed to be okay; however, after I rebooted I get no signal over HDMI. Power cycling the MiSTer, TV and AVR hasn't helped.
I assume there's a quick fix for this that won't require me starting from scratch, but I don't have another display so I'll be flying blind if I need to navigate the menus to run another script. My menu is basically at default with only addition being the update_all script.
Appreciate any assistance.
Help Req - Cat ran script, lost HDMI video.
-
teknomedic
- Posts: 18
- Joined: Sat Jan 30, 2021 1:17 pm
- Has thanked: 1 time
- Been thanked: 2 times
-
akeley
- Top Contributor
- Posts: 1457
- Joined: Mon May 25, 2020 7:54 pm
- Has thanked: 505 times
- Been thanked: 471 times
Re: Help Req - Cat ran script, lost HDMI video.
Pun intended? Sorry, couldn't resist ='_'=
Grab a fresh mister.ini from here, put it in media/fat/ on your sd card, overwriting the old one. See if that fixes it.
CRT SCR$ Project - building a collection of high-quality photos of CRT displays
CRT ART Books - retro-gaming books with authentic CRT photos
-
teknomedic
- Posts: 18
- Joined: Sat Jan 30, 2021 1:17 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: Help Req - Cat ran script, lost HDMI video.
Lol, nice pun.
Thanks, I'll attempt and report back, but it'll have to wait about a day due to my work schedule.
-
LamerDeluxe
- Top Contributor
- Posts: 1239
- Joined: Sun May 24, 2020 10:25 pm
- Has thanked: 892 times
- Been thanked: 284 times
Re: Help Req - Cat ran script, lost HDMI video.
The cat probably was jealous of all the attention MiSTer was getting.
Re: Help Req - Cat ran script, lost HDMI video.
General advice: In cases like this it can be nice to have SMB (my fave), FTP, etc. set up so, as long as networking is up, you can jump into the MiSTer filesystem to try fixes from your PC.
she/her
-
Chris23235
- Top Contributor
- Posts: 984
- Joined: Sun May 24, 2020 8:45 pm
- Has thanked: 127 times
- Been thanked: 197 times
Re: Help Req - Cat ran script, lost HDMI video.
Also an advice, once your MiSTer.ini suits your needs make a backup. It is a crucial file and more then once I was happy to have a backup. It is not overly complicated to configure the MiSTer again, but time consuming to remember all the different settings you made.
-
teknomedic
- Posts: 18
- Joined: Sat Jan 30, 2021 1:17 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: Help Req - Cat ran script, lost HDMI video.
I can see video again, yay! Thank you all.
@akeley - going back to the default MiSTer.ini file worked, thank you. I compared the two and there were certainly some video setting changes between them.
To the others... I'll be keeping a backup now, ha. I'll also try and setup access directly to the MiSTer via my network as that would have made things a bit easier this morning.
@akeley - going back to the default MiSTer.ini file worked, thank you. I compared the two and there were certainly some video setting changes between them.
To the others... I'll be keeping a backup now, ha. I'll also try and setup access directly to the MiSTer via my network as that would have made things a bit easier this morning.