MT32pi not turning on or detected by MiSTer

Discussion of official MiSTer Project addons. (https://github.com/MiSTer-devel/Hardware_MiSTer)


Post Reply
User avatar
JWDog
Posts: 77
Joined: Sun Oct 25, 2020 6:54 pm
Has thanked: 65 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by JWDog »

Karmeck wrote: ↑Wed May 18, 2022 6:30 am How does that pi get power?

Maybe your power supply is not strong enough.
It gets power from a cable I received with the pi. Do you have any recommendations for either pi or mister for suffient power. Because i either power it with pi ,with hat turned off or power with mister through the user port wirh hat turned on.
Top
Karmeck
Posts: 87
Joined: Fri Feb 25, 2022 1:50 pm
Has thanked: 18 times
Been thanked: 8 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by Karmeck »

JWDog wrote: ↑Tue May 24, 2022 8:26 am
Karmeck wrote: ↑Wed May 18, 2022 6:30 am How does that pi get power?

Maybe your power supply is not strong enough.
It gets power from a cable I received with the pi. Do you have any recommendations for either pi or mister for suffient power. Because i either power it with pi ,with hat turned off or power with mister through the user port wirh hat turned on.
I would like an image of your power supply,for your miste, where information about tech power supply is available and and image with everything connected when it is not working, but should.
Top
User avatar
JWDog
Posts: 77
Joined: Sun Oct 25, 2020 6:54 pm
Has thanked: 65 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by JWDog »

Here is a pic of the power supply. I live in the US. It has a splitter end for power to the usb hub and io board with a bridge power to the de10nano
Attachments
20220524_081237.jpg
20220524_081237.jpg (3.37 MiB) Viewed 1683 times
20220524_080631.jpg
20220524_080631.jpg (3.38 MiB) Viewed 1689 times
Top
User avatar
JWDog
Posts: 77
Joined: Sun Oct 25, 2020 6:54 pm
Has thanked: 65 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by JWDog »

Here is a pic of the power supply for the pi.
Attachments
20220524_081716.jpg
20220524_081716.jpg (2.85 MiB) Viewed 1679 times
Top
Karmeck
Posts: 87
Joined: Fri Feb 25, 2022 1:50 pm
Has thanked: 18 times
Been thanked: 8 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by Karmeck »

JWDog wrote: ↑Tue May 24, 2022 3:07 pm Here is a pic of the power supply. I live in the US. It has a splitter end for power to the usb hub and io board with a bridge power to the de10nano
How come you use two splinters and I power it all with no splitter.

Not home right now but can show my setup when I get home.
Top
Karmeck
Posts: 87
Joined: Fri Feb 25, 2022 1:50 pm
Has thanked: 18 times
Been thanked: 8 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by Karmeck »

O7xccMW.jpeg
O7xccMW.jpeg (539.88 KiB) Viewed 1533 times

As you can see, I'm only using the top right power socket. That's all that's needed.
Top
FPGA64
Top Contributor
Posts: 940
Joined: Mon Mar 01, 2021 3:10 pm
Has thanked: 49 times
Been thanked: 375 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by FPGA64 »

Karmeck wrote: ↑Mon May 30, 2022 4:50 pm
As you can see, I'm only using the top right power socket. That's all that's needed.
No its not.

The digital board recommends the way the other guy has it set up with the bridge between the DE10 and the USb board
Top
Karmeck
Posts: 87
Joined: Fri Feb 25, 2022 1:50 pm
Has thanked: 18 times
Been thanked: 8 times

Re: MT32pi not turning on or detected by MiSTer

Unread post by Karmeck »

FPGA64 wrote: ↑Mon May 30, 2022 5:28 pm
Karmeck wrote: ↑Mon May 30, 2022 4:50 pm As you can see, I'm only using the top right power socket. That's all that's needed.
No its not.

The digital board recommends the way the other guy has it set up with the bridge between the DE10 and the USb board
now i think it was Facebook i learned this, but there are 3 revisions of the usb board, the version I have, only needs power at the top.
Top
Post Reply

Return to “Official Project Addon Boards”