Hello,
I’m buying all the components for my MiSTer setup and have a couple questions.
So far my build includes:
De10 nano board
MiSTer USB Hub
128 SDRAM
Asus BT 500 adapter
I have an hdmi monitor that does not have any audio capabilities. Am I forced to buy the digital IO board in order to be able to get sound? I have headphones and some bookshelf speakers but no way of hooking them up with this setup.
Do I need to buy a bigger power supply?
Am I missing anything else obvious in this build?
Any input appreciated. Excited to get started once it all arrives.
New to MiSTer FPGA Question About Audio?
-
FishInSearchOfWater
- Posts: 5
- Joined: Wed Jun 01, 2022 3:59 am
-
FoxbatStargazer
- Top Contributor
- Posts: 1018
- Joined: Thu Dec 10, 2020 5:44 pm
- Has thanked: 315 times
- Been thanked: 238 times
Re: New to MiSTer FPGA Question About Audio?
Some speakerless monitors still have a headphone out for precisely this situation, be sure to check for that. Otherwise as mentioned, you will need an HDMI audio extractor if you don't want an I/O board.
-
12characters
- Posts: 125
- Joined: Wed Jun 03, 2020 5:39 pm
- Has thanked: 8 times
- Been thanked: 36 times
Re: New to MiSTer FPGA Question About Audio?
An I/O board has the advantages that it fits official cases and can hold a cooling fan, which you might want to add in the future.
-
jca
- Top Contributor
- Posts: 1911
- Joined: Wed May 27, 2020 1:59 pm
- Has thanked: 145 times
- Been thanked: 454 times
Re: New to MiSTer FPGA Question About Audio?
You can always use a fan mount plate like https://misterfpga.co.uk/product-tag/fan-plate/ and a fan is not even necessary but recommended.
-
akeley
- Top Contributor
- Posts: 1441
- Joined: Mon May 25, 2020 7:54 pm
- Has thanked: 496 times
- Been thanked: 467 times
Re: New to MiSTer FPGA Question About Audio?
I had been using this for nearly 2 years: https://misterfpga.co.uk/product/mister ... -heatsink/
CRT SCR$ Project - building a collection of high-quality photos of CRT displays
CRT ART Books - retro-gaming books with authentic CRT photos
-
FishInSearchOfWater
- Posts: 5
- Joined: Wed Jun 01, 2022 3:59 am
Re: New to MiSTer FPGA Question About Audio?
If I were to go the route of a digital IO board, and use tos out to a DAC which would give me the headphone or speaker output, would I need to get a different power supply? Some of the DACs I looked at would use the powered usb from the usb hub.
-
Malor
- Top Contributor
- Posts: 860
- Joined: Wed Feb 09, 2022 11:50 pm
- Has thanked: 64 times
- Been thanked: 194 times
Re: New to MiSTer FPGA Question About Audio?
A bigger power supply is usually a good idea in general.
I'd probably use a separate power supply for a DAC that took a TOSLINK adapter. That's optical and doesn't carry power, so if you use its own supply, or buy a new USB supply for it, you can just leave it off Mister power entirely, which is always a good idea. You'd end up with two separately powered devices with only a fiber link between them.
I'd probably use a separate power supply for a DAC that took a TOSLINK adapter. That's optical and doesn't carry power, so if you use its own supply, or buy a new USB supply for it, you can just leave it off Mister power entirely, which is always a good idea. You'd end up with two separately powered devices with only a fiber link between them.