SNK Ikari Warriors Arcade Core

[Xbytez]

It looks like RndMnkIII will be developing Ikari Warriors for MiSTer next!

https://twitter.com/RndMnkIII/status/15 ... 0158035968

Ikari_flyer.png (43.54 KiB) Viewed 10794 times

[fierman]

I have the original rotary sticks for this one. The wiring is incredibly complex, but would be so nice to be able to use them

[XtraSmiley]

I have the original rotary sticks for this one. The wiring is incredibly complex, but would be so nice to be able to use them

Me too and I'm excited for possible SNAC support for them. They are actually normal 8 way joysticks and a ribbon cable that feeds the 12 position rotary mech. It would be relatively simple to add support for it, but I'm not sure how to wire them up. I was thinking a DB15 connector cable.

[Waifu4Life]

Nice, this SNK board also plays Athena.

[mhartman]

I’ve used an original stick with mame. There is a way to wire the rotary part up with a bunch of diodes and an ultimarc encoder, which I forget exactly how to do. Very cool - love this game.

[fierman]

I’ve used an original stick with mame. There is a way to wire the rotary part up with a bunch of diodes and an ultimarc encoder, which I forget exactly how to do. Very cool - love this game.

Was it something like this?
https://github.com/GadgetReboot/Arduino ... ystickMame

I don't own an ultimarc/ipac, but I assume i could leave that out alltogether.

[RndMnkIII]

I know how the LS-30 rotary joystick works but the question is to build a proper hardware interface without adding a lot of lag with a software debouncer like what I've seen done with Arduino. It would be necessary to add resistors, capacitors and Schmitt Trigger inverters to the design for lag-free noise filtering. Or assume a lag of 10-15ms and hope that due to the characteristics of this type of input, the lag is not so critical.

[eLLuiGi]

I also have an snk rotary and it would be so cool to play with it ! I'll test it with my mister2jamma.

[CMR]

I noticed that T.N.K. III has a snac option. Does anyone know how to wire up rotary controls for it?

[RndMnkIII]

SNAC is not functional yet, I'm working on it.

[XtraSmiley]

I know how the LS-30 rotary joystick works but the question is to build a proper hardware interface without adding a lot of lag with a software debouncer like what I've seen done with Arduino. It would be necessary to add resistors, capacitors and Schmitt Trigger inverters to the design for lag-free noise filtering. Or assume a lag of 10-15ms and hope that due to the characteristics of this type of input, the lag is not so critical.

OK, well, please let me know if I can help in any way on this, I'll be happy and willing to help!

Thanks for all your work!

[Esoteric_rt]

What about using the Ultimarc rotary upgrades for Sanwa sticks? They just simulate keypresses that move the rotary left/right

[XtraSmiley]

What about using the Ultimarc rotary upgrades for Sanwa sticks? They just simulate keypresses that move the rotary left/right

That may be an option for many, but I want to use the actual LS-30s (or HAPP versions) so the 13 pins are necessary.

[XtraSmiley]

I know how the LS-30 rotary joystick works but the question is to build a proper hardware interface without adding a lot of lag with a software debouncer like what I've seen done with Arduino. It would be necessary to add resistors, capacitors and Schmitt Trigger inverters to the design for lag-free noise filtering. Or assume a lag of 10-15ms and hope that due to the characteristics of this type of input, the lag is not so critical.

I just wrote you on Twitter, but this might be easier.

What if the two DB15 SNAC interfaces from Antonio Villena were used as player 1 and player 2 rotary functions. Then the joystick and buttons were via a USB into the MiSTer?

The reason I ask is because the controller I built uses a Brook Zero Pi PCB for the joystick and buttons, and the rotary is wired to a DB15. This set-up allows me to use the joystick on a real PCB and SuperGun because the rotary plugs into the PCB directly and the USB joystick/buttons go into an UNDAMNED USB to DB15 converter that plugs into the SuperGun.

This same joystick could be used with Antonio Villena's DB15 SNAC interface for the rotation.

But your core would have to accept joystick and buttons from MiSTer USB and rotation inputs from DB15.

If this is something that you can do, please let me know!

[Beaps]

I used a standard encoder for movements and button but I cannot get the ultimarc rotary encoder to work.

IMG-20220721-084140.jpg (318.04 KiB) Viewed 8759 times

[RndMnkIII]

My idea is to use one DB15 connector for both normal inputs and rotary data, as some games are two player, I want limit the number of DB15 ports to 2. I don't known nothing about using ultimarc interfaces.

[eLLuiGi]

Excellent idea

[Beaps]

My idea is to use one DB15 connector for both normal inputs and rotary data, as some games are two player, I want limit the number of DB15 ports to 2. I don't known nothing about using ultimarc interfaces.

So no encoder, just wire the original stick loom to a DN15 connector?

[RndMnkIII]

12-> 4
or
12-> 2
encode

[RndMnkIII]

I've testing if it's needed hardware debounce or not using the original arcade circuit using Schmitt Trigger Inverters

[RndMnkIII]

software debounce can incur in several milliseconds of delay

[lamarax]

Sorry for pissing on your party guys, but can you inform me where one can source an OG LS-30!?

There's this recent HORI concept incorporating a rotary stick, but a surviving LS-30 one can get hold of is akin to buying the Mona Lisa

[Beaps]

Rotary-Encoder-LS-30-Harness.jpg (86.13 KiB) Viewed 7902 times

[XtraSmiley]

My idea is to use one DB15 connector for both normal inputs and rotary data, as some games are two player, I want limit the number of DB15 ports to 2. I don't known nothing about using ultimarc interfaces.

Everything you do is great, bc you’re doing it!

But, if possible, can you set it up in MiSTer to take a 1-1 input for the rotary on a DB15 as an option?

[Vic20-Ian]

Sorry for pissing on your party guys, but can you inform me where one can source an OG LS-30!?

There's this recent HORI concept incorporating a rotary stick, but a surviving LS-30 one can get hold of is akin to buying the Mona Lisa

I don't know where you would find an original easily but I have Ultimarc rotary encoders on the sticks in my cabinet. They are non clicking with an optical encoder and usb interface.

You can go mechanical

https://www.ultimarc.com/arcade-control ... ik-j-stik/

or optical

https://www.ultimarc.com/arcade-control ... k-upgrade/

[XtraSmiley]

Sorry for pissing on your party guys, but can you inform me where one can source an OG LS-30!?

There's this recent HORI concept incorporating a rotary stick, but a surviving LS-30 one can get hold of is akin to buying the Mona Lisa

If you want an original, I’ve got 6 that I’m working to put in a metal case and creat a joystick that works for both real PCBs and the MiSTer, that’s why I'm so interested in how the stick controls are implemented.

Once I get the first stick done I’ll make the rest and plan on selling them. It won’t be cheap though, just the parts are $500.

[sonik]

Any plans to support usb spinner/paddle via MiSTer's hps_io paddle_x / spinner_x ?

[drmister]

Sorry for pissing on your party guys, but can you inform me where one can source an OG LS-30!?

There's this recent HORI concept incorporating a rotary stick, but a surviving LS-30 one can get hold of is akin to buying the Mona Lisa

If you want an original, I’ve got 6 that I’m working to put in a metal case and creat a joystick that works for both real PCBs and the MiSTer, that’s why I'm so interested in how the stick controls are implemented.

Once I get the first stick done I’ll make the rest and plan on selling them. It won’t be cheap though, just the parts are $500.

If you have any extra, I'd be interested in buying one. Feel free to message me whenever. Thanks!

[XtraSmiley]

I've had a few people ask me about these. So bottom line, I'm in no rush to make these, as parts are super hard to get right now. I'll be doing the prototype soon and I'll get some pics, but the final versions will be specifically ordered metal joystick boxes that cost a ton, so the final stick price will be above $500 USD, if not a LOT above $500 USD, so I don't even know if I'll do all 6. I may just do one to see if it sells, then work on the next one etc.

If you're in a rush for LS-30s, I recommend the forums at KLOV as people list them every few months or so, about $200-300 for a pair, that's how I got my six.

[drmister]

I've had a few people ask me about these. So bottom line, I'm in no rush to make these, as parts are super hard to get right now. I'll be doing the prototype soon and I'll get some pics, but the final versions will be specifically ordered metal joystick boxes that cost a ton, so the final stick price will be above $500 USD, if not a LOT above $500 USD, so I don't even know if I'll do all 6. I may just do one to see if it sells, then work on the next one etc.

If you're in a rush for LS-30s, I recommend the forums at KLOV as people list them every few months or so, about $200-300 for a pair, that's how I got my six.

Thanks!