USB Hub Not Working?

[kupoRGB]

Hey guys,

Trying to use a USB hub through the USB mini port on the De-10 nano. I am getting power to all of my devices apparently, but they are not working with MiSTer.

Any help is greatly appreciated.

Thanks!

[Xbytez]

You need to connect via the OTG Micro USB socket on the DE10-Nano, using an OTG USB hub.

[kupoRGB]

Thank you, I will try this and report back!

[thisisamigaspeaking]

You need to connect via the OTG Micro USB socket on the DE10-Nano, using an OTG USB hub.

Thank you, I will try this and report back!

There are also OTG adapters that would let you attach a regular hub.

For anyone curious, OTG is a way for devices that are usually USB clients (DE10-nano, smartphone, whatever) to connect to USB devices (like controllers, drives, whatever) and act as the host.

[kupoRGB]

Unfortunately the micro USB port isn’t working either, it must be that my USB hub isn’t “OTG” which is incredibly inconvenient. I will buy another hub.

Thanks everyone.

[Xbytez]

If you need a recommendation, for a cheap OTG hub these are used by many for low cost MiSTer builds:

https://www.amazon.com/dp/B01JL837X8/

https://www.amazon.co.uk/gp/product/B075ZKJ76L/

[kupoRGB]

Thank you, immediately picked one of those up! Gonna try and set up tty2oled while I wait on the Multisystem restock.