MiSTer FPGA with an SSD

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

MiSTer FPGA with an SSD

Unread post by neogeo81 »

I am wanting to buy a large SSD to hook up to the Mister as my micro sd card of 400gb will not be enough for future cores like ps1 and saturn.

Can someone explaing what the advantage of an external USB SSD is compared to having all on the sd card?
Is it faster (the USB are 2.0 i think)? Or is it only the size price ratio that is better?
AngelicLiver
Top Contributor
Posts: 434
Joined: Fri May 29, 2020 8:50 am
Has thanked: 86 times
Been thanked: 120 times

Re: MiSTer FPGA with an SSD

Unread post by AngelicLiver »

Using commodity HDDs or SSDs is generally orders of magnitude cheaper than using high-capacity Micro SD cards. The speed advantages of using SSDs over HDDs is also pretty negligible over USB 2.0 and these older systems only had very slow optical media drives anyway (1x CD transfer rate is only 150KBps) so using cheap external storage is absolutely fine.

I use a little 2.5" external USB enclosure with a spare 2TB HDD for Sega/Mega CD and PC-Engine CD. It performs great and I expect it will be getting plenty more use when those new cores drop.
jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: MiSTer FPGA with an SSD

Unread post by jca »

HDD are much cheaper, SD cards wear out, speed is not an issue.
User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: MiSTer FPGA with an SSD

Unread post by neogeo81 »

AngelicLiver wrote: Wed Nov 03, 2021 3:54 pm Using commodity HDDs or SSDs is generally orders of magnitude cheaper than using high-capacity Micro SD cards. The speed advantages of using SSDs over HDDs is also pretty negligible over USB 2.0 and these older systems only had very slow optical media drives anyway (1x CD transfer rate is only 150KBps) so using cheap external storage is absolutely fine.

I use a little 2.5" external USB enclosure with a spare 2TB HDD for Sega/Mega CD and PC-Engine CD. It performs great and I expect it will be getting plenty more use when those new cores drop.
But today i can buy a 512gb micro sd card for the same price as a 500gb ssd. HDD is no option for me.
User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: MiSTer FPGA with an SSD

Unread post by neogeo81 »

jca wrote: Wed Nov 03, 2021 4:06 pm HDD are much cheaper, SD cards wear out, speed is not an issue.
that is a bit of a myth as the writing on mister will be never as much as it would wear out. also classic HDDs are subject to fail more often than a micro sd card.
AngelicLiver
Top Contributor
Posts: 434
Joined: Fri May 29, 2020 8:50 am
Has thanked: 86 times
Been thanked: 120 times

Re: MiSTer FPGA with an SSD

Unread post by AngelicLiver »

neogeo81 wrote: Wed Nov 03, 2021 4:18 pm
AngelicLiver wrote: Wed Nov 03, 2021 3:54 pm Using commodity HDDs or SSDs is generally orders of magnitude cheaper than using high-capacity Micro SD cards. The speed advantages of using SSDs over HDDs is also pretty negligible over USB 2.0 and these older systems only had very slow optical media drives anyway (1x CD transfer rate is only 150KBps) so using cheap external storage is absolutely fine.

I use a little 2.5" external USB enclosure with a spare 2TB HDD for Sega/Mega CD and PC-Engine CD. It performs great and I expect it will be getting plenty more use when those new cores drop.
But today i can buy a 512gb micro sd card for the same price as a 500gb ssd. HDD is no option for me.
👍 By all means go for the Micro SD card then.
Neocaron
Top Contributor
Posts: 375
Joined: Sun Sep 27, 2020 10:16 am
Has thanked: 209 times
Been thanked: 87 times

Re: MiSTer FPGA with an SSD

Unread post by Neocaron »

jca wrote: Wed Nov 03, 2021 4:06 pm HDD are much cheaper, SD cards wear out, speed is not an issue.
So I might bring bad luck to myself saying that, but I use full size sd cards with a micro sd to sd adapter and it works like a charm on my Mister. And I'll add that in my case, I have found full size Sd cards to be very reliable. Basically, all the ones I have since 2015 or so are still alive and kicking despite the fact that I use them weekly for raw file transfer of video footage.

My rule is that once a card turns 5 years old I reserve it for entertainment purpose.
So now I have 3 sd cards from sandisk that I use only for my Mister, as dedicated core cartridge and it works very well! No failure so far.
For comparison, I have 3 micro sd cards, and 2 of the 3 have writting errors, after 3 years of usage.

Take that as you will :mrgreen:

Remastering Classic Game Cinematics: My new Youtube fun, check it out :D
https://www.youtube.com/@neocaron87

User avatar
SwedishGojira
Posts: 65
Joined: Sun May 24, 2020 7:26 pm
Location: Sweden
Has thanked: 27 times
Been thanked: 29 times
Contact:

Re: MiSTer FPGA with an SSD

Unread post by SwedishGojira »

neogeo81 wrote: Wed Nov 03, 2021 4:18 pm But today i can buy a 512gb micro sd card for the same price as a 500gb ssd. HDD is no option for me.
You could also buy a regular 2TB hdd for the same money or less as that 512GB Micro SD...
MostroW
Posts: 344
Joined: Tue Aug 18, 2020 3:32 pm
Has thanked: 150 times
Been thanked: 57 times

Re: MiSTer FPGA with an SSD

Unread post by MostroW »

using a 1TB MX5 ssd, cost me around 80€ back then when i bought it, might be around 100€ now because of shortages and whatnot.
jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: MiSTer FPGA with an SSD

Unread post by jca »

Neocaron wrote: Wed Nov 03, 2021 4:28 pm So I might bring bad luck to myself saying that, but I use full size sd cards ...
Full size SD cards seems to be a lot more reliable, I have many but the capacity is small. What size are yours or more exactly what is the maximum size availble?
Neocaron
Top Contributor
Posts: 375
Joined: Sun Sep 27, 2020 10:16 am
Has thanked: 209 times
Been thanked: 87 times

Re: MiSTer FPGA with an SSD

Unread post by Neocaron »

jca wrote: Wed Nov 03, 2021 6:16 pm
Neocaron wrote: Wed Nov 03, 2021 4:28 pm So I might bring bad luck to myself saying that, but I use full size sd cards ...
Full size SD cards seems to be a lot more reliable, I have many but the capacity is small. What size are yours or more exactly what is the maximum size availble?
For the Mister I use 1 Sandisk extreme pro 128go for all consoles and arcade cores, and 1 256go Kingston Canvas react dedicated to the Ao486 core.
And while it is more expensive than hdds, the convenience to carry them around, drop them without stressing out makes them a must have for me.

They just don't want to die even after using them for years pulling terabites of data off them.

Regarding the size, they go up to 1to, but it's pricey ^^
I would argue, it's better to go for a 256go as many time as you need.

Remastering Classic Game Cinematics: My new Youtube fun, check it out :D
https://www.youtube.com/@neocaron87

jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: MiSTer FPGA with an SSD

Unread post by jca »

There are also Endurance versions of micro SD. Did anyone try those?
warham
Posts: 32
Joined: Sat Aug 01, 2020 11:29 pm
Been thanked: 9 times

Re: MiSTer FPGA with an SSD

Unread post by warham »

does the update all script still function correctly when using an SSD?
FPGA64
Top Contributor
Posts: 940
Joined: Mon Mar 01, 2021 3:10 pm
Has thanked: 49 times
Been thanked: 375 times

Re: MiSTer FPGA with an SSD

Unread post by FPGA64 »

warham wrote: Sun Aug 07, 2022 6:12 pm does the update all script still function correctly when using an SSD?
Yes works fine for me
MostroW
Posts: 344
Joined: Tue Aug 18, 2020 3:32 pm
Has thanked: 150 times
Been thanked: 57 times

Re: MiSTer FPGA with an SSD

Unread post by MostroW »

warham wrote: Sun Aug 07, 2022 6:12 pm does the update all script still function correctly when using an SSD?
it's not so much about it being an ssd but the location it's pointing to. (mounting entry)
for me for example it stores the cores on: /media/fat
and the games / bios / additionals are stored on: /media/usb0

if you run the update_all script and push up on the controller or keyboard you can configure these settings on where to store the data that is being downloaded, mind you keyboard is required to enter the path(s).
Malor
Top Contributor
Posts: 860
Joined: Wed Feb 09, 2022 11:50 pm
Has thanked: 64 times
Been thanked: 195 times

Re: MiSTer FPGA with an SSD

Unread post by Malor »

It's *supposed* to honor the path priority (which I think is /media/fat/cifs/games, /media/fat/usb0/games, /media/fat/games, in that order), but at least one core does not work that way. The AO486 BIOS will always download to /media/fat/games/AO486, no matter what.

I use symlinks in /media/fat, to be absolutely certain that ROMs and game files end up on my SMB share. Putting the 'config' dir on the SMB share, however, was a bad idea and gave me a lot of trouble. It's best to keep the 'config' dir, and all its contents, on the same filesystem with the main Mister binary. This is because a Samba share takes a few extra seconds to come up, and may not be available when the Mister binary looks for it after a cold boot. That makes it revert to defaults, and then return to normal settings after a warm reboot. It's very confusing.
rodimus
Posts: 3
Joined: Thu Sep 29, 2022 6:41 pm

Re: MiSTer FPGA with an SSD

Unread post by rodimus »

I like the idea of using MicroSDs, but I'm afraid that the slot will be ruined over time.
What do you think is better in terms of quality and speed (access times)?
Use the MicroSD in a USB adapter? a flash drive? or an SSD hard drive?
MostroW
Posts: 344
Joined: Tue Aug 18, 2020 3:32 pm
Has thanked: 150 times
Been thanked: 57 times

Re: MiSTer FPGA with an SSD

Unread post by MostroW »

there's micro sd extension available where you plug in the micro sd ribbon cable into the de10 and then use the extended adapter for your cards.

not sure if there's an speed / performance degradation though, there must be people in here who've already done this and can fill in the potential blanks.
rhester72
Top Contributor
Posts: 1323
Joined: Thu Jun 11, 2020 2:31 am
Has thanked: 15 times
Been thanked: 213 times

Re: MiSTer FPGA with an SSD

Unread post by rhester72 »

MostroW wrote: Tue Oct 04, 2022 3:42 pm there's micro sd extension available where you plug in the micro sd ribbon cable into the de10 and then use the extended adapter for your cards.

not sure if there's an speed / performance degradation though, there must be people in here who've already done this and can fill in the potential blanks.
Works just fine.
elvis
Posts: 63
Joined: Sun May 24, 2020 9:25 pm
Has thanked: 41 times
Been thanked: 37 times

Re: MiSTer FPGA with an SSD

Unread post by elvis »

neogeo81 wrote: Wed Nov 03, 2021 3:34 pm Is it faster (the USB are 2.0 i think)? Or is it only the size price ratio that is better?
Storage speed questions are answered via this testing:

https://misteraddons.com/blogs/news/mis ... d-shootout
User avatar
16Bittt
Posts: 98
Joined: Fri Oct 22, 2021 9:23 pm
Has thanked: 16 times
Been thanked: 10 times

Re: MiSTer FPGA with an SSD

Unread post by 16Bittt »

jca wrote: Wed Nov 03, 2021 4:06 pm

HDD are much cheaper, SD cards wear out, speed is not an issue.

you can get a 2TB SSD for a very reasonable price these days..SSDs wear out yes but that's nothing to worry about compared to physical hard disk drive unreliability and sensitiveness.physical hard drives fail very easily.I have many SSD drives some being used for years and have yet to see one of them fail.
for Mister they're going to be used just to load (read) so even less likelihood of "wearing out".
mechanical hard drives are 60 years old ancient technology and should have been obsolete long time ago.
at this point they only make sense if 8TB+ capacity is needed and only for file storage.

Akuma
Posts: 138
Joined: Sat Dec 11, 2021 9:50 pm
Has thanked: 24 times
Been thanked: 46 times

Re: MiSTer FPGA with an SSD

Unread post by Akuma »

neogeo81 wrote: Wed Nov 03, 2021 3:34 pm

I am wanting to buy a large SSD to hook up to the Mister as my micro sd card of 400gb will not be enough for future cores like ps1 and saturn.

# BIG FAT WARNING

AliExpress is offering fake storage devices HDD/SSD/M.2/NVME.
I've seen advertised sizes as large as 64TB, which of course is total bs :lol:

Make sure if you buy from China to compare it to the average prices in your country and deduct VAT+shipping. This would give you a reasonable idea if you are being scammed or not.

2cts

User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: MiSTer FPGA with an SSD

Unread post by neogeo81 »

Akuma wrote: Sun Oct 22, 2023 6:41 pm
neogeo81 wrote: Wed Nov 03, 2021 3:34 pm

I am wanting to buy a large SSD to hook up to the Mister as my micro sd card of 400gb will not be enough for future cores like ps1 and saturn.

# BIG FAT WARNING

AliExpress is offering fake storage devices HDD/SSD/M.2/NVME.
I've seen advertised sizes as large as 64TB, which of course is total bs :lol:

Make sure if you buy from China to compare it to the average prices in your country and deduct VAT+shipping. This would give you a reasonable idea if you are being scammed or not.

2cts

My comment was 2 years ago mate. A lot has changed and i think all of us are clearly aware to not buy 64TB SSDs for 15 bucks on Aliexpress. :lol:

Akuma
Posts: 138
Joined: Sat Dec 11, 2021 9:50 pm
Has thanked: 24 times
Been thanked: 46 times

Re: MiSTer FPGA with an SSD

Unread post by Akuma »

Oh really? I did not pick up on that :lol:

rcade
Posts: 119
Joined: Wed May 27, 2020 7:57 pm
Has thanked: 1 time
Been thanked: 17 times

Re: MiSTer FPGA with an SSD

Unread post by rcade »

I just mount the GAMES folder with SMB and it works great. Just share it off a PC elsewhere in your home... Easy.

User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: MiSTer FPGA with an SSD

Unread post by neogeo81 »

rcade wrote: Tue Oct 24, 2023 10:01 pm

I just mount the GAMES folder with SMB and it works great. Just share it off a PC elsewhere in your home... Easy.

But if you want to travel with your misters or take them to your colleagues to play you are fkd ;)

rcade
Posts: 119
Joined: Wed May 27, 2020 7:57 pm
Has thanked: 1 time
Been thanked: 17 times

Re: MiSTer FPGA with an SSD

Unread post by rcade »

neogeo81 wrote: Wed Oct 25, 2023 6:43 am
rcade wrote: Tue Oct 24, 2023 10:01 pm

I just mount the GAMES folder with SMB and it works great. Just share it off a PC elsewhere in your home... Easy.

But if you want to travel with your misters or take them to your colleagues to play you are fkd ;)

Yeah, I guess. Or take a laptop with you. :)

User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: MiSTer FPGA with an SSD

Unread post by neogeo81 »

rcade wrote: Wed Oct 25, 2023 7:04 pm
neogeo81 wrote: Wed Oct 25, 2023 6:43 am
rcade wrote: Tue Oct 24, 2023 10:01 pm

I just mount the GAMES folder with SMB and it works great. Just share it off a PC elsewhere in your home... Easy.

But if you want to travel with your misters or take them to your colleagues to play you are fkd ;)

Yeah, I guess. Or take a laptop with you. :)

i am meanwhile complete on sd card again with my 2 misters. don't need more than 512GB each.

Bas
Top Contributor
Posts: 623
Joined: Fri Jan 22, 2021 4:36 pm
Has thanked: 80 times
Been thanked: 324 times

Re: MiSTer FPGA with an SSD

Unread post by Bas »

SMBv3 has decent enough encryption for it to function over the internet. Even MS themselves offer it as a service on Azure. Samba and MiSTer both support it.

User avatar
ChopstickSamurai
Posts: 17
Joined: Sun May 24, 2020 9:38 pm
Has thanked: 13 times

Re: MiSTer FPGA with an SSD

Unread post by ChopstickSamurai »

My setup has been using a MASE - MiSTer Attached SATA Enclosure from Retro Frog (available at https://stoneagegamer.com/mase-mister-a ... -frog.html), along with a 2TB SSD I picked up during the Amazon Prime sale earlier this year to replace a 2TB mechanical drive I was using. Works great and I have no complaints. Good luck!

Post Reply