Memory Card & SNAC Adapter

[Swainy]

Hi all, I got this PSX Snac adapter this week from https://MiSTerFPGA.co.UK and it works great. However I’m not sure how I’m supposed to save games when using the Snac adapter?

aXlmw2k.jpg (92.03 KiB) Viewed 2650 times

I’ve put a blank.mcd file in my PSX games folder but when I try to mount the file it doesn’t appear.

[Rawls]

Controllers and memory cards both come in on the same connection.

So if you want to save while SNAC is enabled then you need to connect a real memory card.

The way to do that is with a multi tap.

You plug that into SNAC port 1 and then plug your controller and memory card into the multi tap's port 1.

[annette]

Easy time to use save states

https://youtu.be/vVhaeBYRLTk

[aberu]

Or you can just mount a memory card in slot 2 if you are only using SNAC on P1.

[Swainy]

Or you can just mount a memory card in slot 2 if you are only using SNAC on P1.

Cool. How do I do that?

[aberu]

Or you can just mount a memory card in slot 2 if you are only using SNAC on P1.

Cool. How do I do that?

https://www.youtube.com/watch?v=CyhGE862kkw

Like this.

You just choose the psx .sav file. Each one of these is a memory card. If you want a blank one use this --> https://github.com/MiSTer-devel/PSX_MiS ... /empty.mcd

[chopperthedog]

A handful of games will ONLY save/read to memory card slot 1, R4 a favorite of mine is one of them. I saw provisions on the snac adapter I bought from ebay for memory cards. I got crafty on a rainy Saturday and made a custom memory card pcb using sweeps from a chip socket for my psx snac thingy. Worked out perfectly, copied my records on real hardware to cheap mem card and MiSTer loaded them just fine. @OP, I bet under that cover you'll find the holes to add a memory card on your snac.



good day.