MiSTer No Display Signal

Discussion about displays and related hardware including MiSTer filters and video settings.
Post Reply
User avatar
Choirboy
Posts: 2
Joined: Tue Dec 13, 2022 4:56 am

MiSTer No Display Signal

Unread post by Choirboy »

So I haven't used my mister in a few months. Last time I used it was on a trip I took by plane. I wanted to update everything but powering on I get no signal. The lights from my Digital IO board aren't lighting up either. Tried directly powering from DE-10, tried different cables and monitors but nothing is working. My .ini settings are the default ones.

Build:
DE10-Nano
Digital IO
128mb ram
RTC
USB Hub
powered by Triad WSX050-4000

Top
AngelicLiver
Top Contributor
Posts: 434
Joined: Fri May 29, 2020 8:50 am
Has thanked: 86 times
Been thanked: 120 times

Re: MiSTer No Display Signal

Unread post by AngelicLiver »

  1. Is the micro SD card in the correct card slot? (The one on the DE10-Nano itself.)

  2. Are the 4 DIP switches set correctly? (For digital IO they should be set to Off, Off, Off, On. Check here.

  3. Have you tried a fresh install on a different micro SD card?

Top
Marcellus
Posts: 28
Joined: Wed Jun 29, 2022 5:50 pm
Has thanked: 10 times
Been thanked: 2 times

Re: MiSTer No Display Signal

Unread post by Marcellus »

Looks like dead or broken SD card.

Top
User avatar
Choirboy
Posts: 2
Joined: Tue Dec 13, 2022 4:56 am

Re: MiSTer No Display Signal

Unread post by Choirboy »

Marcellus wrote: ↑Wed Dec 14, 2022 1:46 am

Looks like dead or broken SD card.

yeah, that's what it turned out to be. went to the store and bought another one. works fine now

Top
Post Reply

Return to “Display Devices”