Subsitute for 5v Jumper?

Longtime4321 · Unread post by **Longtime4321** » Mon Oct 03, 2022 3:11 pm

My I/O board didn't come with a 5v jumper. Can I just use a really short wire?

Longtime4321 · Unread post by **Longtime4321** » Mon Oct 03, 2022 3:24 pm

it has come to my attention that it's called a micro jumper and not a 5v jumper. I also found one in a box of stuff I forgot I had, but I still think it would be useful to know for those who don't have one

Unread post by **Xbytez** » Mon Oct 03, 2022 4:42 pm

They are indeed jumpers, however the correct type has a 2.54mm pitch.

IRONBERG · Unread post by **IRONBERG** » Mon Oct 03, 2022 5:51 pm

Yes you can. I use a short cable.

Bernouilli · Unread post by **Bernouilli** » Thu Jan 05, 2023 10:04 am

My board didn't come with a jumper either. But there was a 0 Ohm resistor soldered on the bottom of the pcb.
I removed it and put a jumper, I now can switch between 3.3v and 5v for the fan

MiSTer FPGA Forum

Subsitute for 5v Jumper?

Subsitute for 5v Jumper?

Re: Subsitute for 5v Jumper?

Re: Subsitute for 5v Jumper?

Re: Subsitute for 5v Jumper?

Re: Subsitute for 5v Jumper?