So Robert Peip (FPGAzumSpass) Is Working on a New Core...

For topics which do not fit in other specific forums.
User avatar
Waifu4Life
Posts: 271
Joined: Fri Jun 19, 2020 5:30 am
Has thanked: 21 times
Been thanked: 47 times

So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Waifu4Life »

Knowing that he mostly does consoles and assuming that it's not something that we already have or that's being worked on, what do you think it is?
-Virtual Boy: Would make sense, he's done 3 portables so far
-NDS: He's already worked on a non-MiSTer core in the past
-3DO: Cause why not?
-CDi: For shits and giggles
-PC-FX: 失敗した日本語専用コンソールを望まない人はいますか?

mcf81
Posts: 12
Joined: Mon Feb 06, 2023 4:26 pm
Has thanked: 5 times
Been thanked: 4 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by mcf81 »

I’m sure nobody wants to say it because “it’s impossible”, but this could be the N64 core that everyone is dreaming of … Robert has expressed significant interest in creating an N64 core in the past. If it is in any way possible, Robert would be the man to pull it off.

Maybe DS is more likely because he has already done a large amount of work there, but I feel that if it were DS he might just come out and say it ? Whereas even mentioning an N64 core would generate so much hype that he may be hesitant to post that he’s working on it without some kind of functioning prototype.

Whatever the core turns out to be, the MiSTer project is truly blessed to have engineers like Robert contributing! I also just want to say a big thank you to all devs for their work — the MiSTer project is a monumental achievement in retro computing that cannot be overstated.

12characters
Posts: 125
Joined: Wed Jun 03, 2020 5:39 pm
Has thanked: 8 times
Been thanked: 36 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by 12characters »

My first thoughts were directed towards 3DO or Virtual Boy. However, based on the clues that he has given on his Patreon page (including a screenshot), my bet is now on a different beast.

Robert Peip wrote:

With this in place, I'm now able to try and run all kind of homebrew or original software. While most fully-fledged programs won't do anything yet, being able to run testprograms for all the subsystems already opens up a large field of things to work on and validate.
....
I can tell you it's using different width for different subsystems :)

Do the math!

User avatar
Waifu4Life
Posts: 271
Joined: Fri Jun 19, 2020 5:30 am
Has thanked: 21 times
Been thanked: 47 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Waifu4Life »

12characters wrote: Mon Feb 06, 2023 5:04 pm

My first thoughts were directed towards 3DO or Virtual Boy. However, based on the clues that he has given on his Patreon page (including a screenshot), my bet is now on a different beast.

Robert Peip wrote:

With this in place, I'm now able to try and run all kind of homebrew or original software. While most fully-fledged programs won't do anything yet, being able to run testprograms for all the subsystems already opens up a large field of things to work on and validate.
....
I can tell you it's using different width for different subsystems :)

Do the math!

But we already have others working on a Jaguar core already, seems like a waste.

rhester72
Top Contributor
Posts: 1323
Joined: Thu Jun 11, 2020 2:31 am
Has thanked: 15 times
Been thanked: 213 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by rhester72 »

the_importer wrote: Mon Feb 06, 2023 5:32 pm

But we already have others working on a Jaguar core already, seems like a waste.

Same thing happened with PSX, and look how that turned out =)

jca
Top Contributor
Posts: 1911
Joined: Wed May 27, 2020 1:59 pm
Has thanked: 145 times
Been thanked: 454 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by jca »

the_importer wrote: Mon Feb 06, 2023 5:32 pm

But we already have others working on a Jaguar core already, seems like a waste.

I did not see anything new in years.

thorr
Top Contributor
Posts: 1311
Joined: Mon Jul 06, 2020 9:37 pm
Has thanked: 634 times
Been thanked: 308 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by thorr »

I am sort of hoping that someday he will write a replacement for ao486 in the vain of PCXT with a BIOS and full compatibility and cycle accuracy. I would think at least a DX2-66 could be done, and maybe a DX4-100, maybe without the math coprocessor, maybe with.

User avatar
Armakuni
Posts: 208
Joined: Fri Jan 13, 2023 10:37 am
Has thanked: 38 times
Been thanked: 33 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Armakuni »

My money would be on 3DO

N64 is not possible on the DE-10

There is not much else it could be really apart from Jaguar....

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

Very exciting to hear Robert is starting another core. It's fun to speculate based off of what he has teased. The few facts from the post are:
It's a MiSTer core (i.e. it's not N64 or something running on a board more powerful than the DE-10, like his abandoned 2DS core)
There is homebrew for the system (rules out a number of things, and means it's definitely not an arcade system)
This line here is curious "I can tell you it's using different width for different subsystems :)" - does he mean that the core covers different systems (i.e. how the Master System core also covers Game Gear) or is this a technical thing I don't understand?

I am wondering if the font in the graphic is a known system font, could that be a clue to what the system is? Does anyone recognise it?

Based off of what he has said in the past I think 3DO is very unlikely, and my money would have been on Virtual Boy for his next endeavour. Atari Jaguar is a good shout though. The current core doesn't look like there is enough dev interest to get it fully working, and seems it may not feasibly be possible, and although JT said he wants to do Jaguar he said the same about NGPC, back in 2021, which led to Robert moving on to PS1 instead. Now it is 2023 and Robert has finished PS1 and the JT NGPC core is still not released. So I don't think Robert would be put off by JT putting his towel down on Jaguar.

Looking forward to the eventual reveal, will be happy with whatever he choses to work on next. :-)

Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Pepeart »

I think it's the Atari Jaguar "Do the math 32+32=64" I remember that from the commercials and adds on gaming magazines

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

Oh nice, I didn't spot that. Jaguar and CD certainly has a decent homebrew scene, so it adds up there.

That would be really exciting if it is Jaguar.

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

Wait, did Robert actually write "do the math"?

Marcellus
Posts: 28
Joined: Wed Jun 29, 2022 5:50 pm
Has thanked: 10 times
Been thanked: 2 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Marcellus »

NDS would be great. Many fantastic 2d pixel art games. Early 3D games are waste of time. They are fossils.

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

DS isn't doable on MiSTer, Robert already started a core and found the DE-10 not powerful enough to handle the 3D elements in games so abandoned it. DS would be one for whatever one day way in the future supersedes MiSTer with a more powerful board, if that ever happens. It isn't worth speculating about though.

mario64
Posts: 119
Joined: Sun May 24, 2020 6:50 pm
Has thanked: 20 times
Been thanked: 10 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by mario64 »

I honestly hope it isn't Virtual Boy. I have a consolized VB and it just isn't the same. These games were designed to be played in 3D. Playing them in 2D on a TV is not very fun imo.

retro
Posts: 148
Joined: Fri Jun 04, 2021 5:19 am
Location: Kuala Lumpur, Malaysia
Has thanked: 47 times
Been thanked: 14 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by retro »

mario64 wrote: Tue Feb 07, 2023 2:58 am

I honestly hope it isn't Virtual Boy. I have a consolized VB and it just isn't the same. These games were designed to be played in 3D. Playing them in 2D on a TV is not very fun imo.

Wouldn't the DE-10 Nano's HDMI port be able to output a 3D signal on a compatible TV?

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

My understanding is in theory, yes a 3D VB core could be made. However if I remember correctly Robert said he wasn't interested in the 3D aspect. But if a 2D core was made someone else could add 3D support. This is all very hypothetical though.

User avatar
Newsdee
Top Contributor
Posts: 873
Joined: Mon May 25, 2020 1:07 am
Has thanked: 104 times
Been thanked: 239 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Newsdee »

mario64 wrote: Tue Feb 07, 2023 2:58 am

Playing them in 2D on a TV is not very fun imo.

There are 3D displays that can take side-by-side video from HDMI. That would work nicely

KremlingKuthroat19
Posts: 237
Joined: Sat Aug 22, 2020 3:08 am
Has thanked: 27 times
Been thanked: 50 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by KremlingKuthroat19 »

Fun topic! If I were to guess it’d be either between the Jaguar and Virtual Boy. Both have strong homebrew scenes. NGPC, 3DO and CD-I are lacking homebrew.

Robert expressed interest in Jaguar via a poll where he mentioned it being one of the consoles he was interested in prior to committing to PSX. Also, the timing is just too perfect. The best Jaguar emulator ever just came out in BigPemu. This emulator supports all Jaguar and Jaguar CD games! The first emulator to play Jaguar CD games! I wouldn’t be surprised if Robert was sharing notes with this emulator’s author.

That’s just my speculation. I suppose we’ll find out soon :)

User avatar
LamerDeluxe
Top Contributor
Posts: 1239
Joined: Sun May 24, 2020 10:25 pm
Has thanked: 887 times
Been thanked: 284 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by LamerDeluxe »

retro wrote: Tue Feb 07, 2023 3:04 am
mario64 wrote: Tue Feb 07, 2023 2:58 am

I honestly hope it isn't Virtual Boy. I have a consolized VB and it just isn't the same. These games were designed to be played in 3D. Playing them in 2D on a TV is not very fun imo.

Wouldn't the DE-10 Nano's HDMI port be able to output a 3D signal on a compatible TV?

Yes, it can. There are already 3D cores for NES and Master System. It is just a matter of outputting a side-by-side or over/under image (or even interlaced). Then the TV can handle the conversion to show it correctly.

Alternatively you could add an anaglyph mode for people without 3D displays, so cheap red/cyan glasses could be used.

mercuryshadow09
Posts: 9
Joined: Fri Dec 10, 2021 2:05 pm
Has thanked: 2 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by mercuryshadow09 »

Armakuni wrote: Mon Feb 06, 2023 8:29 pm

My money would be on 3DO

N64 is not possible on the DE-10

There is not much else it could be really apart from Jaguar....

Everybody also said 32X wasn't possible, yet here we are.

User avatar
neogeo81
Top Contributor
Posts: 446
Joined: Fri Apr 16, 2021 1:52 pm
Has thanked: 34 times
Been thanked: 47 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by neogeo81 »

mercuryshadow09 wrote: Tue Feb 07, 2023 8:51 am
Armakuni wrote: Mon Feb 06, 2023 8:29 pm

My money would be on 3DO

N64 is not possible on the DE-10

There is not much else it could be really apart from Jaguar....

Everybody also said 32X wasn't possible, yet here we are.

you are really comparing the complexity of the N64 and RAM and BUS speed with a 32X? Lol, you're funny.

pbsk8
Posts: 289
Joined: Mon Dec 28, 2020 4:23 pm
Has thanked: 75 times
Been thanked: 33 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by pbsk8 »

it's cougarboy

12characters
Posts: 125
Joined: Wed Jun 03, 2020 5:39 pm
Has thanked: 8 times
Been thanked: 36 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by 12characters »

Moondandy wrote: Mon Feb 06, 2023 9:05 pm

This line here is curious "I can tell you it's using different width for different subsystems :)" - does he mean that the core covers different systems (i.e. how the Master System core also covers Game Gear) or is this a technical thing I don't understand?

Sam Tramiel wrote:

Look at a PC; they call Pentium a 64-bit system, it is, but they also have 8-bit chips and 8-bit parts of the system as well; the clock is 8-bit. In Jaguar there's 16-bit, 32-bit, and 64-bit in parts of it.

Do the math!

Tulius
Posts: 40
Joined: Sat May 29, 2021 4:51 am
Has thanked: 3 times
Been thanked: 4 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Tulius »

I really hoped it was a 3DO core but it seems Jaguar its the most certain one... heck we dont even have a NeoGeo CD core yet why??
Some computer cores would be great like a PC 98 or FM Towns Marty.
And I think a Virtual Boy core that would be a waste of time.

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

Tulius wrote: Tue Feb 07, 2023 12:24 pm

I really hoped it was a 3DO core but it seems Jaguar its the most certain one... heck we dont even have a NeoGeo CD core yet why??
Some computer cores would be great like a PC 98 or FM Towns Marty.
And I think a Virtual Boy core that would be a waste of time.

Furrtek who made the Neo Geo core did some work to add in NGCD support but never finished it and has been working on other projects (right now he is finishing off TMNT Arcade). Maybe he, or someone else, will come back to it at some point - it is possible CD code could be taken from another core now we have CD support in a number of cores, which could make it easier to implement now.

PC 98 and FM Towns really need a Japanese developer to do them, as the documentation is all technical and Japanese so very very difficult for a non native speaker. We do have a Japanese dev Puu-san who has early WIP cores for both PC 98 and FM Towns you can download from the relevant forum threads is you know the systems well enough to run them.

pbsk8 wrote: Tue Feb 07, 2023 10:21 am

it's cougarboy

Rysha beat Robert to the punch, she added support for Mega Duck AKA Cougar Boy to the Gameboy core awhile back.

User avatar
PistolsAtDawn
Posts: 359
Joined: Fri Feb 18, 2022 7:29 pm
Has thanked: 307 times
Been thanked: 100 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by PistolsAtDawn »

Robert did such a great job with the PSX core that whatever this turns out to be will also be excellent, I'm sure.

Robert - if you somehow are doing a Virtual Boy core, I own one that I would be happy to donate if that would be helpful. The same goes for any developer who wants to work on it.

pac
Posts: 77
Joined: Mon May 25, 2020 6:11 am
Has thanked: 70 times
Been thanked: 26 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by pac »

Tulius wrote: Tue Feb 07, 2023 12:24 pm

heck we dont even have a NeoGeo CD core yet why??

Habe a look at the NGCD thread. Would love to see one or as an addition to the NG core, but seems that the majority of people do not care.

That being said - super excited what Robert will do next.

FPGAzumSpass
Core Developer
Posts: 385
Joined: Sat May 23, 2020 12:55 pm
Has thanked: 42 times
Been thanked: 414 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by FPGAzumSpass »

Wow, a lot of discussion on that already.

I just wanted to tell you that i don't keep it private just for fun, but because i want to present at least something, so the disaster of the DS doesn't repeat, where some games where already running and i still had to give up. "The burnt child fears the fire".

User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: So Robert Peip (FPGAzumSpass) Is Working on a New Core...

Unread post by Moondandy »

That's all good Robert, we are just excited and having fun speculating. We'll be excited and grateful for whatever you choose to do next. :-)

Post Reply