Lets Make Some New MIDI Hardware

[altitude909]

Greetings list!

very excited about this, i dreamt of doing this years ago when i read about FPGAs being able to replicate old hardware and here now it is.

So my interest is mostly music focused and ive been pouring over the possibilities of a bit more capable MIDI interface. Ive been looking over the history of 3rd party stuff and nothing jumps out as easy to adapt to MiSTer so my idea is this: MIDI out to a 1 to 16 MIDI mult with a thru thrown in for good measure. Pack it up using the arduino header for 3v3 and 5v and the two pins used by the digital board. Do two boards:

1. 3.5mm TRS headers, one with 8 outs (4 on top, 4 bottom) + In and thru
2. 8 more outs that stack on board 1

any input is welcome.

[altitude909]

so on second thought, making a shield for this doesnt make any sense since a majority of people already have the user port so i'll simply go stand alone. This is the basic premise but scaled up

mrmidi.png (164.49 KiB) Viewed 10298 times

[callanabrown]

I'm wondering why you would need so many physical ports? Most of my gear is daisy chained with midi thrus, with each piece of gear on a separate channel.

[altitude909]

so you dont have to daisy chain Couple of those boards should be landing here soon so I'll see how it works.

My other idea is to get some macro keyboards to make some quick launch controls like transport and whatever shortcuts. there are 5x2 ones on amazon for $25 that will take relegendable keycaps

[altitude909]

And done

received_347015548024692.jpeg (75.01 KiB) Viewed 9923 times

[altitude909]

And sucess! So one input (either TRS A or TRS B) that goes into the hc14 for the thru and midi in and the midi outs multed to 3 outputs. If there's and interest, ill jlc some populated boards and make a panel for it.

17021649576512090673265908011095.jpg (2.14 MiB) Viewed 9543 times

[altitude909]

Behold!

MIDI out -> 16x MIDI outs
1 PSIMIDI MIDI In
1 MIDI Thru

The way it works:

MiSTer MIDI out is just Multed and level shifted to the outputs via Hex Schmitt−Trigger

Board 1: MIDI IN, USB C socket -> MiSTer user port, MIDI Thru, 3x MIDI outs
Board 2: Adds 5x MIDI outs
Board 3: Adds 8x MIDI outs

So you can mix and match accordingly

Files here: https://github.com/MichiganSynthWorks/MiSTerMIDI

I have some boards if anyone wants to try this, just pay for shipping. Its all fine pitch/0402

410483618_916356566713550_9143773616210622823_n.jpg (188.17 KiB) Viewed 9037 times

[LamerDeluxe]

Woa, that is incredible. Great job! Cubase on the ST core will probably work really well with this.

[altitude909]

yeah, it sure does

[snd32]

I would happily buy a few boards from you if you have any left!