Can I connect the analog IO MiSTer to a PC CRT and BVM at the same time and play on one or the other without changing configs?
MiSTer on PC CRT and BVM
-
misterrocks
- Posts: 150
- Joined: Tue Jan 11, 2022 1:43 am
- Has thanked: 55 times
- Been thanked: 3 times
-
misterrocks
- Posts: 150
- Joined: Tue Jan 11, 2022 1:43 am
- Has thanked: 55 times
- Been thanked: 3 times
Re: MiSTer on PC CRT and BVM
Shouldn't MiSTer scale the HDMI output for the PC CRT regardless of the core resolution?
-
misterrocks
- Posts: 150
- Joined: Tue Jan 11, 2022 1:43 am
- Has thanked: 55 times
- Been thanked: 3 times
Re: MiSTer on PC CRT and BVM
HDMI to DAC to PC CRT, and VGA to RGB to BVM will work optimally with the same MiSTer config?
I'm reading that I should set forced_scandoubler=1 in order to use the PC CRT (from HDMI output in this case) but will that setting interfere with VGA output to the BVM?
-
FoxbatStargazer
- Top Contributor
- Posts: 1019
- Joined: Thu Dec 10, 2020 5:44 pm
- Has thanked: 315 times
- Been thanked: 238 times
Re: MiSTer on PC CRT and BVM
misterrocks wrote: ↑Tue Jan 30, 2024 12:34 pmHDMI to DAC to PC CRT, and VGA to RGB to BVM will work optimally with the same MiSTer config?
I'm reading that I should set forced_scandoubler=1 in order to use the PC CRT (from HDMI output in this case) but will that setting interfere with VGA output to the BVM?
Yes it would, you shouldn't use it. Forced_scandoubler is for kicking the original 15khz analog of most cores up to 31khz, which could be a problem for your PVM. If you're using the scaler via HDMI to your PC monitor you don't need or want it.