Slap Fight

[jca]

Latest update: Y/C support and audio issues fixed.

[Alkadian]

Can someone please confirm if the latest update is working correctly? When it boots up I get a Sound Error message.

Thanks!

[jca]

No problem here. What error message?

[Alkadian]

After chechig the ROMS it get stuck and it shows a "SOUND ERROR" message. Thanks for checking and confirming it is working.

I will delete both .rbf and .mra and redownload everything from scratch.

[jca]

I just noticed that there are 2 rbfs in the release folder:

Arcade-SlapFight_20220322.rbf Audio pause March 22, 2023 22:44
Arcade-SlapFight_60HZ.rbf Slapfight 60Hz Beta March 26, 2023 18:48

[Alkadian]

Thanks for pointing that out. So I did a few tests.

Arcade-SlapFight_20220322.rbf doesn't work with my 60Hz Eizo LCD screen, as I get that error message.
Arcade-SlapFight_60HZ.rbf Slapfight 60Hz doesn't boot at all. Actually every time I run this version my LCD screen switches off completely and I have to cycle power my DE-10 to get it up and running again. The first time it happened I thought I had fried my DE-10 after so many tries! False alarm!

Well, not a problem at all. I am going to wait for when the 60Hz version will become available.

[phillai]

Can someone please confirm if the latest update is working correctly? When it boots up I get a Sound Error message.

Thanks!

I get that occasionally too.
Pressing 'reset' in settings a few times fixes it.

[Alkadian]

Can someone please confirm if the latest update is working correctly? When it boots up I get a Sound Error message.

Thanks!

I get that occasionally too.
Pressing 'reset' in settings a few times fixes it.

Thanks for confirming!

[Alkadian]

I have tried to press the reset button several times but to no avail. I have just submitted an issue on antongale's (@xterc) GitHub page.

[phillai]

For me it definitely don't work all the time but as mentioned before, a few resets (maybe max 4-5 times) gets it working for me.
Just for your information, I'm using this MiSTer from Antonio...
https://antoniovillena.es/store/product ... ster-plus/

[Lex]

the latest version of slap fight should work perfectly and there is no sound error message

[phillai]

the latest version of slap fight should work perfectly and there is no sound error message

Yup, I can confirm this is the case as well!!

[dip]

Hey, just to say that it does not seem fixed for me ?
Often on startup i will get a sound error, with sound glitches, But it can also be a memory test failure.
When this happens i tried rebooting up to 10 times to no avail. Even tried hard rebooting the de10.
But then a while later it may start without a problem.

Not experiencing this with Tiger Heli, and both slap fight and Alcon have the same problem (unclear to me if it's the same binary underneath)

I'm using a barebone de10 without sdram. Or heatsink/fan it that's important (but since i've been running ao486 games without a problem i doubt that's the issue)

[Alkadian]

Yep, still no luck with this game from my side too. Hopefully it will be fixed in the future as it is an awesome game

[RiotRay]

Now I too have the sound problem with this core. It´s strange, because it worked before.

Maybe it has something to do with the issue, that I recently upgraded my sdram to 3.0?

[dip]

This core does not need sdram so I don't think it's related

[keikojoe62]

Hi folks i have the same issue core worked before now can get it to boot due to sound issue.

[keikojoe62]

Manually deleting config/nvram/slapfighb1.nvm will allow the core to load successfully once more.

[RiotRay]

@keikojoe62

I can confirm this. Deleting these .nvm files fixes the problem.

[BabaYaga326]

Manually deleting config/nvram/slapfighb1.nvm will allow the core to load successfully once more.

Works for Alcon core as well. Thanks!

[Alkadian]

Manually deleting config/nvram/slapfighb1.nvm will allow the core to load successfully once more.

Hi,
That worked like a charm, many thanks for pointing that out!