Image vibrates over component ypbpr consumer CRT

[peke]

Hi to all, I notice some movemnet (vibrate) image on my crt, It´s a samsung consumer CRT (some later model)

image looks perfect with HD retrovision cables over component, but with mister I get some movement, minor, but maybe It can get fixed.

Maybe someone got any clue.

thanks

[thorr]

Try different cores and see if the problem goes away. It might not like certain frequencies.

[peke]

it mostly notice on the nes core, but others got it too, is there a change on the. .ini file that can fix or mitigate it?

[akeley]

Are you using Direct Video or IO analogue board?

[peke]

IO analogue Board 5.6 xl and a vga to component cable thru a switch box (not powered)

[akeley]

Skip the switch box and try direct connection.

[peke]

skipping the switch box makes the same, direct out you mean hdmi to vga converter?

[akeley]

skipping the switch box makes the same, direct out you mean hdmi to vga converter?

No, I mean directly from IO board to the TV. Direct Video + component needs tweaking cables. I just thought maybe the switch box is at fault, as it happened to me before.

Best if you could try this setup on another TV. Also, trying with a completely fresh mister.ini, if you haven't already.

[peke]

i will try a fresh .ini and see. I also was wondering if a not powered switch box make it but no. This is the only crt with component input I got.

[dickhardpill]

… a vga to component cable…

Is this cable plugged directly into your MiSTer/DE10? Which port is it plugged into?

[peke]

I´m using IO analog board 5.6 xl, I´m using a vga to component cable thru my consumer CRT samsung (circa 2006).

[dickhardpill]

I´m using IO analog board 5.6 xl, I´m using a vga to component cable thru my consumer CRT samsung (circa 2006).

Sorry- I somehow missed where you said that.

[thorr]

I´m using IO analog board 5.6 xl, I´m using a vga to component cable thru my consumer CRT samsung (circa 2006).

There might be a setting in the service menu of the TV that could fix this. Try changing each setting and putting it back, one at a time to see if you can find the setting that might affect it. Also, there is a cable on the neck board of the CRT that sometimes needs to be pulled to disable issues such as this, but right now I can't remember what it is called.

[Allejo]

Are there other devices connected to the TV? Something similar happens with my Toshiba CRT when something is connected to the S-video port for some reason (the device doesn't even need to be turned on). So if that's your case too, try disconnecting everything apart from the Mister from the TV.

[peke]

I think I solve it, going way all around all the inputs of the tv (composite 1 and 2, s-video, component, antena, ......

don´t know why but when I do that image stop vibrating.