Same problem for me. Here was my solution:
https://github.com/MiSTer-devel/Templat ... 4e5d1d555c
"Disable 24bit mode if SW2=ON for better compatibility with 3rd party boards."
(Switch is one of the four on the DE10-nano board)
minimig resets itself when using workbench
Re: minimig resets itself when using workbench
My MiSTer seemed a bit crashy after a recent update (random reboots in some cores, and particularly when fiddling with core settings). In my case it was just an underpowered PSU (which had seemed OK-ish on older versions). Got myself a 4A PSU and no stability problems since.
-
Chris23235
- Top Contributor
- Posts: 982
- Joined: Sun May 24, 2020 8:45 pm
- Has thanked: 127 times
- Been thanked: 197 times
Re: minimig resets itself when using workbench
bluescrn wrote: ↑Sun Sep 08, 2024 7:18 pmMy MiSTer seemed a bit crashy after a recent update (random reboots in some cores, and particularly when fiddling with core settings). In my case it was just an underpowered PSU (which had seemed OK-ish on older versions). Got myself a 4A PSU and no stability problems since.
It must not necessarily be underpowered, it may got faulty over time. The type if PSUs we all use with our MiSTer (phone charger, etc.) are not not known for their long life cycles. These things are proun to fail after a few years of constant use. In most cases they simply don't do what they are meant to do any more: supply a constant current within the defined specs.