MiSTer FPGA Forum

salamantecas wrote: ↑Sun Jun 05, 2022 8:32 am I leave the image I made of ninja warrior

Yep, thanks again! Has been merged as an alternative.

agree, needs its own thread

RealLarry wrote: ↑Sun Jun 05, 2022 10:47 am
PM sent via Discord. I think I have to open a new thread for the tty2tft project to channel the topic.

If anybody thought that I'm dead, I have one to disappoint. While I'm working on tty2tft I did some pictures for the new cores, but hadn't time to propagate them. But here there are now:

my alternative pic for gamate

salamantecas wrote: ↑Sat Jun 18, 2022 11:13 am my alternative pic for gamate

Hehe, it was so clear to me that something was coming from you. Thanks, mate! It made it as an alternative.

RealLarry wrote: ↑Sat Jun 18, 2022 11:18 am

salamantecas wrote: ↑Sat Jun 18, 2022 11:13 am my alternative pic for gamate

Hehe, it was so clear to me that something was coming from you. Thanks, mate! It made it as an alternative.

my friend I can't stand it when I see images posted, although I have to say that lately you make very nice screens and it's getting harder and harder to give a version that surpasses it although I have a lot of fun giving my touch, this is what Venice was referring to and what was the reason....

salamantecas wrote: ↑Sat Jun 18, 2022 5:27 pm

RealLarry wrote: ↑Sat Jun 18, 2022 11:18 am

salamantecas wrote: ↑Sat Jun 18, 2022 11:13 am my alternative pic for gamate

Hehe, it was so clear to me that something was coming from you. Thanks, mate! It made it as an alternative.

my friend I can't stand it when I see images posted, although I have to say that lately you make very nice screens and it's getting harder and harder to give a version that surpasses it although I have a lot of fun giving my touch, this is what Venice was referring to and what was the reason....

Thanks again, went to the repo as alternatives...

Keep on getting an error when verifying:

'OLED_DC' was not declared in this scope

on line 129: Adafruit_SSD1322 oled(256, 64, &SPI, OLED_DC, OLED_RESET, OLED_CS);


Any wisdom? Thanks

All set,, sorry false alarm.

Let us know what you did to solve your problem!

Unfortunately I don't really know...I was trying on my mac then switched to windows and everything went flawless.

Sliff2000 wrote: ↑Tue Jun 21, 2022 7:25 pm ...
'OLED_DC' was not declared in this scope
on line 129: Adafruit_SSD1322 oled(256, 64, &SPI, OLED_DC, OLED_RESET, OLED_CS);
...

This error message appears if you have selected the wrong board in the Arduino IDE.
I have a few definitions in the sketch which are related to the supported Boards.
If you don't choose one of these Boards you get such Errors.

...first part of new pictures:

...and part two. Done. Anything left?

Oh wow, that was quick! Good effort! I'll probably add the other similar era IREMs as it seems once we have M72 the rest should be fairly simple to implement as well.

Be worth doing Laser 500 and RCA Studio II, those are in various stages of development and we have file names.

Moondandy wrote: ↑Tue Jun 28, 2022 12:20 pm Oh wow, that was quick! Good effort! I'll probably add the other similar era IREMs as it seems once we have M72 the rest should be fairly simple to implement as well.

Be worth doing Laser 500 and RCA Studio II, those are in various stages of development and we have file names.

Always on service! I'm getting informed by Ms. Google if you add/change something, so I'm permanently in stand-by

Uh, bad yield. Very old and almost unknown games. Better luck next time!

Hi guys

I have been reading all the comments about the installation of the tty2oled with the TTGO-T8 board and I have carried out the steps of both the installation of libraries in arduino and the configuration of parameters, although I have to say that I do choose the 16mb option as directly recommended It gives me a black screen so I chose the option to flash with 4mb
I have managed that instead of a black screen an image with letters mister fpga by sorgelig and a number on the left and the usb logo in the upper right corner that everything seems to indicate that it went well. I have also unchecked the option corresponding to the board code that I am programming in Arduino as recommended by venice. the transmission chip is a ch9102 that gives me problems in windows to change the driver so I have modified the ini lines
System/User INI File Options:

Option TTYDEV="/dev/ttyXXX
This is the communication Interface used by the MiSTer.
Set to TTYDEV="/dev/ttyUSBx" if your Microcontroller uses a CP210x or CH34x USB-Serial Chip <= default
Set to TTYDEV="/dev/ttyACMx" if your Microcontroller uses a CH9102 USB-Serial Chip

The thing is that the screen seems to start up fine but I only get it to show text since when it tries to load the image corresponding to the menu it simply shows something in a bad state to remain black. I'll show you a video so you can get an idea

I also leave the data that I have managed to extract from the device information in case it helps

1.341159] usb 1-1.5: New USB device found, idVendor=1a86, idProduct=55d4, bcdDevice= 4.43
[ 1.341187] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 1.341200] usb 1-1.5: Product: USB Single Serial
[ 1.341209] usb 1-1.5: SerialNumber: 5425003698
[ 1.343908] cdc_acm 1-1.5:1.0: ttyACM0: USB ACM device

crw-rw-rw-1 root tty 5, 0 Jul 4 06:49 /dev/tty
crw--w---- 1 root tty 4, 0 Jul 4 06:49 /dev/tty0
crw--w---- 1 root tty 4, 1 Jul 4 06:49 /dev/tty1
crw--w---- 1 root tty 4, 2 Jul 4 06:49 /dev/tty2
crw--w---- 1 root tty 4, 3 Jul 4 06:49 /dev/tty3
crw--w---- 1 root tty 4, 4 Jul 4 06:49 /dev/tty4
crw--w---- 1 root tty 4, 5 Jul 4 06:49 /dev/tty5
crw--w---- 1 root tty 4, 6 Jul 4 06:49 /dev/tty6
crw--w---- 1 root tty 4, 7 Jul 4 06:49 /dev/tty7
crw--w---- 1 root tty 4, 8 Jul 4 06:49 /dev/tty8
crw--w---- 1 root tty 4, 9 Jul 4 06:49 /dev/tty9
crw-rw---- 1 root dialout 166, 0 Jul 4 06:54 /dev/ttyACM0
crw-rw---- 1 root dialout 4, 64 Jul 4 06:49 /dev/ttyS0
crw-rw---- 1 root dialout 4, 65 Jul 4 06:49 /dev/ttyS1

any help and indication will be welcome, anyway I would have liked to use the online script to make everything easier but it does not detect the chip giving a message to reconnect the usb and run the script again I guess it is because of the controller of usb

Which Interface do you set in your INI?

It looks to me you need to add at least
TTYDEV="/dev/ttyACM0"
to your User INI file.

venice wrote: ↑Mon Jul 04, 2022 8:13 am Which Interface do you set in your INI?

It looks to me you need to add at least
TTYDEV="/dev/ttyACM0"
to your User INI file.

Hi Venice

I did it as you comment but I can't get it to show correct images only text

If I follow these utility instructions I can display the menu text on the screen, just text

https://github.com/venice1200/MiSTer_tt ... ki/Testing

I just did it!!! It has given me to execute the script online that never detected the screen and it has detected the port and I just flashed it correctly online and now it works. Computer mysteries or perhaps someone has reviewed the script online, whatever it is, thanks

is it possible to use 2 tty2oled screens connected at the same time and that they work together in this case a ttyACM0 and a ttyUSB0 since they have different controllers? or will he go crazy? what should i put in the user ini then. The screen with the TTGO is faster than the other

Running two tty2oled displays parallel is currently not supported as you only have one INI file for the setup.

But it is possible to start the tty2oled script by hand with an interface parameter.

See: https://github.com/venice1200/MiSTer_tt ... -parameter

But I haven’t tested this for a long time, maybe it doesn’t work.

salamantecas wrote: ↑Mon Jul 04, 2022 9:05 am …and I just flashed it correctly online and now it works. Computer mysteries or perhaps someone has reviewed the script online, whatever it is, thanks
…

The Software Version 210712 on the Display was a bit too old and the used tty interface was wrong.
After you set the correct Interface the updater was able to update your display.

Changes to the “Standard“ Settings must be added to the User INI File.

Hi, would an ESP32 devkit v1 suffice for this project? I do not see a board with a matching pinout on the github.
Asking in case someone used the devkit v1 before otherwise I'll purchase one of the recommended ESP32.
Thanks.

Do you have a link or some pictures of the board?

venice wrote: ↑Wed Jul 06, 2022 9:16 pm Do you have a link or some pictures of the board?

Here is a picture of the board I have on hands.
Link to the pinout https://www.mischianti.org/2021/02/17/d ... and-specs/

Looks to me more or less like a ESP32 Devkitc V4 if I compare the pinouts.

V1 TX2/RX2 = 17/16

I think it works with the Devkitc V4 connection schema.

Please try and let us know?
Do you want to use the tty2oled Updater or the Arduino IDE?

Thanks, I'll give it a try.
Just to confirm that I should use the tty2oled_esp32-DevKitC_board?
I'll probably use Arduino IDE for the initial setup then use the script for updates.

Use the „Connection Scheme Devkitc V4 and SSD1322“ with your Board.

https://github.com/venice1200/MiSTer_tt ... nd-ssd1322