MiSTer FPGA Forum

Posted: **Wed Jul 15, 2020 8:37 pm**

Thanx Mr Puu for the new version of the core !!

Posted: **Wed Jul 15, 2020 9:10 pm**

Excellent, I didn’t figure it out that Puu released a new version. Many thanks Puu for your continuous efforts on this fantastic core!

Posted: **Thu Jul 16, 2020 12:43 am**

Thanks puusan.

Posted: **Thu Jul 16, 2020 4:30 pm**

Hi guys,

I have just compiled the latest .qar file. At the end of the compilation process, Quartus returned the following:

293001 Quartus Prime Full Compilation was unsuccessful. 3 errors, 240 warnings.

The .rbf seems to be working fine though.

Is this something that I need to be worried about?

Many thanks.

Posted: **Thu Jul 16, 2020 6:36 pm**

which version of quartus are you building with?
the recommended version is 17.0, if i'm not wrong

Posted: **Thu Jul 16, 2020 7:32 pm**

tontonkaloun wrote: ↑Thu Jul 16, 2020 6:36 pm which version of quartus are you building with?
the recommended version is 17.0, if i'm not wrong

Hi,

I have got the 19.1 version for linux.
Thanks.

Posted: **Thu Jul 16, 2020 7:41 pm**

Alkadian wrote: ↑Thu Jul 16, 2020 7:32 pm
tontonkaloun wrote: ↑Thu Jul 16, 2020 6:36 pm which version of quartus are you building with?
the recommended version is 17.0, if i'm not wrong
Hi,

I have got the 19.1 version for linux.
Thanks.

try with 17.0 or 17.1 !

I have already seen compilation errors with version 19 that there is not with version 17

Posted: **Thu Jul 16, 2020 8:00 pm**

I see, thanks. I always struggled to download the version 17 and its associated Cyclone V qdz file from the Intel site, that's why I have ended up with the 19.1. Never mind. Thanks a lot for looking at it for me.

Posted: **Thu Jul 16, 2020 8:15 pm**

Alkadian wrote: ↑Thu Jul 16, 2020 8:00 pm I see, thanks. I always struggled to download the version 17 and its associated Cyclone V qdz file from the Intel site, that's why I have ended up with the 19.1. Never mind. Thanks a lot for looking at it for me.

my compiled file if you want to compare with yours:

Posted: **Thu Jul 16, 2020 8:42 pm**

tontonkaloun wrote: ↑Thu Jul 16, 2020 8:15 pm
Alkadian wrote: ↑Thu Jul 16, 2020 8:00 pm I see, thanks. I always struggled to download the version 17 and its associated Cyclone V qdz file from the Intel site, that's why I have ended up with the 19.1. Never mind. Thanks a lot for looking at it for me.

my compiled file if you want to compare with yours:

That’s fantastic, many thanks for that!

Posted: **Fri Jul 17, 2020 11:42 am**

There is a bug in the disk emulator that seems to destroy the image when written.
I have uploaded a modified version, so please update it.
http://fpga8801.seesaa.net/article/476375530.html

Posted: **Fri Jul 17, 2020 11:46 am**

puu wrote: ↑Fri Jul 17, 2020 11:42 am There is a bug in the disk emulator that seems to destroy the image when written.
I have uploaded a modified version, so please update it.
http://fpga8801.seesaa.net/article/476375530.html

Great, thanks for the heads up Puu!

Posted: **Fri Jul 17, 2020 11:49 am**

@ tontonkaloun,

When you get a chance, would you please share the new .rbf file? I have compiled it but I am receiving the same error messages as before. I would be grateful if you could do it.
Many thanks!

Posted: **Fri Jul 17, 2020 3:42 pm**

Alkadian wrote: ↑Fri Jul 17, 2020 11:49 am @ tontonkaloun,

When you get a chance, would you please share the new .rbf file? I have compiled it but I am receiving the same error messages as before. I would be grateful if you could do it.
Many thanks!

No problem
Gift: pc8801 core

Posted: **Fri Jul 17, 2020 3:56 pm**

tontonkaloun wrote: ↑Fri Jul 17, 2020 3:42 pm
Alkadian wrote: ↑Fri Jul 17, 2020 11:49 am @ tontonkaloun,

When you get a chance, would you please share the new .rbf file? I have compiled it but I am receiving the same error messages as before. I would be grateful if you could do it.
Many thanks!
No problem
Gift: pc8801 core

Hi tontonkaloun,

That was quick! Many thanks for your kind help on both cores. Really appreciated.

Posted: **Sat Jul 18, 2020 12:15 am**

Recent .qar files also include .rbf files, so please use it when compilation does not pass.
X68000/v17/output_files/release-F68kMiSTer.rbf

Posted: **Sat Jul 18, 2020 6:51 am**

Thanks a lot to let the rdf for the one not able to build correctly !

Posted: **Sat Jul 18, 2020 8:14 am**

puu wrote: ↑Sat Jul 18, 2020 12:15 am Recent .qar files also include .rbf files, so please use it when compilation does not pass.
X68000/v17/output_files/release-F68kMiSTer.rbf

@ puu,

That’s great, many thanks for that!

Just a request, if I may, but only when you get a chance please. It would be great if you could have a look at why Bubble Bobble freezes up when it boots up.

Thanks a lot!

Posted: **Sat Jul 18, 2020 9:38 am**

@ puu,

I was playing a bit with the latest revision. I have just noticed that when I play Cotton, the audio seems to play faster than expected and also after a few seconds of playing I get the error message as per the attached image. I have managed to replicate this behaviour every time I have lunched this game.

Many thanks!

Posted: **Sat Jul 18, 2020 9:55 am**

Alkadian wrote: ↑Sat Jul 18, 2020 8:14 am
puu wrote: ↑Sat Jul 18, 2020 12:15 am Recent .qar files also include .rbf files, so please use it when compilation does not pass.
X68000/v17/output_files/release-F68kMiSTer.rbf
@ puu,

That’s great, many thanks for that!

Just a request, if I may, but only when you get a chance please. It would be great if you could have a look at why Bubble Bobble freezes up when it boots up.

Thanks a lot!

For me it boots up fine, but freezes when I start a game.

I noticed, that the ship in Thunder Force II isn't displayed. Chase H.Q. now runs a little bit further, some of the speech on the radio screen is played before it hangs. The controls in After Burner II are non-responsive.

Posted: **Sat Jul 18, 2020 11:25 am**

Chris23235 wrote: ↑Sat Jul 18, 2020 9:55 am
Alkadian wrote: ↑Sat Jul 18, 2020 8:14 am
puu wrote: ↑Sat Jul 18, 2020 12:15 am Recent .qar files also include .rbf files, so please use it when compilation does not pass.
X68000/v17/output_files/release-F68kMiSTer.rbf
@ puu,

That’s great, many thanks for that!

Just a request, if I may, but only when you get a chance please. It would be great if you could have a look at why Bubble Bobble freezes up when it boots up.

Thanks a lot!
For me it boots up fine, but freezes when I start a game.

I noticed, that the ship in Thunder Force II isn't displayed. Chase H.Q. now runs a little bit further, some of the speech on the radio screen is played before it hangs. The controls in After Burner II are non-responsive.

I have tried Thunder Force II and I can confirm that not only the ship but all the other enemies are not displayed at all.

Posted: **Wed Jul 29, 2020 1:51 am**

A new RTL was uploded.
This update is about priority of screens(transparent).

Posted: **Wed Jul 29, 2020 6:14 am**

Thank you puu !

Posted: **Wed Jul 29, 2020 10:53 am**

puu wrote: ↑Wed Jul 29, 2020 1:51 am A new RTL was uploded.
This update is about priority of screens(transparent).

That’s great. I can’t wait to give it a go!! Many thanks!!

Posted: **Wed Jul 29, 2020 4:29 pm**

puu wrote: ↑Wed Jul 29, 2020 1:51 am A new RTL was uploded.
This update is about priority of screens(transparent).

@ Puu,

Thanks again for the new release. I have finally managed to try it. Even with new version when I play the game Cotton, I keep getting the same error message as before along with the same issue with the audio which plays faster.
It plays absolutely fine with the release 20200630.
Has anybody else experienced the same issues as mine at all?
Thanks a lot!

Posted: **Wed Jul 29, 2020 6:19 pm**

puu wrote: ↑Wed Jul 29, 2020 1:51 am A new RTL was uploded.
This update is about priority of screens(transparent).

Thank You very much Púu

Posted: **Sun Aug 02, 2020 5:33 pm**

Just wondering if someone would mind uploading an .rbf of the latest release please. Thanks!

Posted: **Sun Aug 02, 2020 6:06 pm**

johnny5 wrote: ↑Sun Aug 02, 2020 5:33 pm Just wondering if someone would mind uploading an .rbf of the latest release please. Thanks!

Posted: **Sun Aug 02, 2020 6:17 pm**

Thanks very much!

Posted: **Wed Aug 05, 2020 6:45 am**

Does this still require the I/O board and/or a second microSD card for disk storage? Or will it use a VHD?

MiSTer FPGA Forum

X68000 Beta - Updates and Releases

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden

Re: X68000 beta - stopped working all of a sudden