Page 7 of 7
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Tue Nov 29, 2022 11:30 am
by antoniovillena
matijaerceg wrote: ↑Tue Nov 29, 2022 7:36 am
antoniovillena wrote: ↑Tue Nov 29, 2022 7:32 am
matijaerceg wrote: ↑Mon Nov 28, 2022 9:39 pm
Hi Antonio, I noticed the board is back in stock again. Did you fix the boards you're selling?
I full refunded all boards (without return), including yours
My question is: your website is showing in stock again
https://www.antoniovillena.es/store/pro ... e-adapter/ so does that mean you fixed the problem and are selling the board again?
Yes. I am selling different board based on MikeS schematics.
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Wed Dec 14, 2022 10:36 pm
by matijaerceg
antoniovillena wrote: ↑Tue Nov 29, 2022 11:30 am
Yes. I am selling different board based on MikeS schematics.
Nice. I'm assuming this is the version with the active luma trap, hence the power requirement?
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Wed Dec 14, 2022 11:28 pm
by antoniovillena
matijaerceg wrote: ↑Wed Dec 14, 2022 10:36 pm
antoniovillena wrote: ↑Tue Nov 29, 2022 11:30 am
Yes. I am selling different board based on MikeS schematics.
Nice. I'm assuming this is the version with the active luma trap, hence the power requirement?
Yes. You need 5V on pin 9 of VGA port. So analog io board is required
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Thu Dec 15, 2022 1:24 am
by Megahurtz
I just bought Antonio's new MikeS board but can't get it to work. I have composite_sync=1 in my ini file, the sync on green switch is off, and I already had the 5v jumper on to power Antonio's previous s-video transcoder. I'm using a Sony Trinitron with s-video and changed the video setting in Mike's cores to s-vid. I just get a black and white image that won't sync on my set. Any suggestions?
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Thu Dec 15, 2022 2:36 am
by shertz
Megahurtz wrote: ↑Thu Dec 15, 2022 1:24 am
I just bought Antonio's new MikeS board but can't get it to work. I have composite_sync=1 in my ini file, the sync on green switch is off, and I already had the 5v jumper on to power Antonio's previous s-video transcoder. I'm using a Sony Trinitron with s-video and changed the video setting in Mike's cores to s-vid. I just get a black and white image that won't sync on my set. Any suggestions?
I don't actually own one of those adapters, but I think there's a toggle switch for ntsc and pal settings. Try switching that
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Thu Dec 15, 2022 10:03 pm
by Megahurtz
I have it set to ntsc. Should have mentioned that too. I also tested composite and that is working fine. Only s-video is a problem.
Re: S-Video and Composite Over Component Output! (Custom Cores)
Posted: Fri Dec 16, 2022 5:20 am
by shertz
Megahurtz wrote: ↑Thu Dec 15, 2022 10:03 pm
I have it set to ntsc. Should have mentioned that too. I also tested composite and that is working fine. Only s-video is a problem.
Have you tried using a different s-video cable? Or test it on another TV that has S-video input?