Page 2 of 2
Re: SNAC interface for PSX core
Posted: Sun Jun 26, 2022 3:24 am
by CMR
Here is the one I bought.
https://www.ebay.com/itm/325232750362
I wouldn't really recommend it, however, as I confirmed you can't use a virtual memory card with the snac port for that controller enabled. It still works for the second port that isn't snac enabled, but some games don't like saving to the second card even on real systems.
From the wiki:
SNAC can be selected for each port and will support gamepads and memory cards on the corresponding slot. When SNAC is enabled for a slot, the emulated gamepad/memory for this slot is disconnected.
Re: SNAC interface for PSX core
Posted: Sun Jun 26, 2022 4:22 am
by FPGAzumSpass
You can however use a real memcard on the same slot if your adapter allows.
Re: SNAC interface for PSX core
Posted: Sun Jun 26, 2022 6:00 am
by Psyko_2000
mineral55 wrote: ↑Sat Jun 25, 2022 10:14 pm
what is that yellow port?!
yellow video port is for guncon support
Re: SNAC interface for PSX core
Posted: Sun Jun 26, 2022 5:21 pm
by CMR
FPGAzumSpass wrote: ↑Sun Jun 26, 2022 4:22 am
You can however use a real memcard on the same slot if your adapter allows.
Yes you could even modify the adapter I have if you have a spare memory card port laying around since the controller and memory card both use the same data lines.
Re: SNAC interface for PSX core
Posted: Mon Jul 04, 2022 6:49 pm
by Cyber Akuma
multisystem wrote: ↑Thu May 05, 2022 3:31 pm
We made up a very quick (hacked) PSX SNAC interface for the Multisystem User port - it's all working quite well in the new PSX Core that now supports direct PlayStation controllers via SNAC. - this is using a port set from a real PlayStation, it's very simple to connect up to the SNAC pins.
Would this even work with some of the more oddball Memorycards like the PocketStation or that MemcardPRO?
Re: SNAC interface for PSX core
Posted: Sat Jul 16, 2022 10:14 am
by alessiman
Anyone got a diagram or photo of how the Guncon is connected to the display?
Re: SNAC interface for PSX core
Posted: Sat Jul 16, 2022 10:50 am
by alessiman
alessiman wrote: ↑Sat Jul 16, 2022 10:14 am
Anyone got a diagram or photo of how the Guncon is connected to the display?
Nevermind. Worked it out
Re: SNAC interface for PSX core
Posted: Thu Sep 15, 2022 9:33 am
by neogeo81
multisystem wrote: ↑Sat May 07, 2022 5:40 pm
A few more images of the SNAC-BOX PSX (for the Multisystem USER Port).
Is this something people would like to see made available, or just a set of instructions to make your own? - or both?
This can read two physical memory cards, and works with light guns, PSX mouse, rumble pads / shock feedback/recoil etc. and the Multitap 4 port adaptor.
Hi
You mention that this adapter already has the SNAC 3.3V to 5V in it so that means the pins in this image are wrong (right side means 5V). Shouldn't we set the pins to the left (3.3V) to use this PSX SNAC adapter?