Page 1 of 1
USB controller board combo
Posted: Mon May 25, 2020 2:12 pm
by ByHT
I bought one combo USB controller card (
https://www.amazon.de/gp/product/B078W5JQ1Q/),
for two players. In Mister they show as Joystick ID. I've tried "disable_usb_merge=1" in mister.ini , without success.
Think RetroPi has some settings in "usbhid.config", where you can set "options usbhid quirks=0x0810:0xe001:0x00000040" .
Do Mister have some similar settings?
Re: USB controller board combo
Posted: Tue Jun 23, 2020 8:37 am
by GromRGB
I made it on my Arduino Pro Micro this morning
, now I have 4 joysticks (/dev/input/js0, /dev/input/js1...). You just need to modify ''u-boot.txt'' file on your SD Card:
Code: Select all
v=loglevel=4 usbhid.jspoll=1 xpad.cpoll=1 usbhid.quirks=0x2341:0x8037:0x040
PS: 0x2341:0x8037 is the Vendor ID and the Product ID of my Arduino Pro Micro, you must replace it with your controller IDs.
Re: USB controller board combo
Posted: Sat Jul 25, 2020 11:33 am
by RoWolf
GromRGB wrote: ↑Tue Jun 23, 2020 8:37 am
I made it on my Arduino Pro Micro this morning
, now I have 4 joysticks (/dev/input/js0, /dev/input/js1...). You just need to modify ''u-boot.txt'' file on your SD Card:
Code: Select all
v=loglevel=4 usbhid.jspoll=1 xpad.cpoll=1 usbhid.quirks=0x2341:0x8037:0x040
PS: 0x2341:0x8037 is the Vendor ID and the Product ID of my Arduino Pro Micro, you must replace it with your controller IDs.
Hi GromRGB, need some help with 2 player setup on Mister FPGA wired inside my cabinet.
I have 2 Arduino Pro Micro cards each connected to 7 PB + joystick and common F12 PB.
both Pro Micro running the same program (keyboard decoder). each Arduino Pro Micro connected to usb hub with wifi dongle and keyboard receiver.
The thing is that both of them are acting as player 1.
please advise.
Thanks.
Re: USB controller board combo
Posted: Tue Aug 18, 2020 5:51 pm
by GromRGB
RoWolf wrote: ↑Sat Jul 25, 2020 11:33 am
GromRGB wrote: ↑Tue Jun 23, 2020 8:37 am
I made it on my Arduino Pro Micro this morning
, now I have 4 joysticks (/dev/input/js0, /dev/input/js1...). You just need to modify ''u-boot.txt'' file on your SD Card:
Code: Select all
v=loglevel=4 usbhid.jspoll=1 xpad.cpoll=1 usbhid.quirks=0x2341:0x8037:0x040
PS: 0x2341:0x8037 is the Vendor ID and the Product ID of my Arduino Pro Micro, you must replace it with your controller IDs.
Hi GromRGB, need some help with 2 player setup on Mister FPGA wired inside my cabinet.
I have 2 Arduino Pro Micro cards each connected to 7 PB + joystick and common F12 PB.
both Pro Micro running the same program (keyboard decoder). each Arduino Pro Micro connected to usb hub with wifi dongle and keyboard receiver.
The thing is that both of them are acting as player 1.
please advise.
Thanks.
Sorry, I don't see notifications before.
Do you program different keypads on joystick 1 and 2 ?
Contrary to joysticks, I think that the same keypad on different keyboards act as only one action for one user.
Regards