MiSTer FPGA Forum

Have you inspected the possibility of running the stack on other boards?

At least those that have the same FPGA soc, cyclone V with arm, like the SocKit, but it has 1GB SDRAM on the FPGA.

https://www.terasic.com.tw/cgi-bin/page ... 6&PartNo=2

If I'm not mistaken that has the same type of 1GB DDR that the regular DE-10 has, which is still too slow, so would need a RAM add-on board.

There is ram independently connected to both the HPS and FPGA (rather than just the HPS on the Nano) so maybe it wouldn't require an additional module, although we would still need an add on board for HDMI, usb hub, etc.

It's also 3 times the price.

they are actually not expensive, also all-in-one de10-standard, including 64MB SDRAM.
there is usb-otg, you can external hub it, if you need to. its actually half the price, and
the new one is about the same combined as the add-on parts together.

the ultimate replication board would be the DE10-Pro, 2.8M logic, 32GB DDR4 RAM

If you like linux, recompiling cores or a secondary installer for different fpgas should be easy.

kubay wrote: ↑Sun Dec 27, 2020 11:05 am http://modernhackers.com/mister/

The DE-0 nano SOC is missing from the list.

MiSTer Project on DE10-Nano, DE10-Standard, DE1-SoC, Arrow SoCKit

Telegram:
https://t.me/MiSTerFPGAWoRLd

Patreon:
https://www.patreon.com/noemiabril

GitHub:
https://github.com/noemi-abril