MiSTer FPGA Forum

Posted: **Sun Mar 21, 2021 1:12 pm**

I just got a component cable to use with my mister. The thing is the image is red ish.

My mister ini is set like this:

ypbpr=1
vga_scaler=1

Result:

monitor via hdmi:

: IMG-20210321-100517.jpg (4.35 MiB) Viewed 1423 times

tv via vga-component

: IMG-20210321-100527.jpg (4.76 MiB) Viewed 1423 times

If I set ypbpr=1 and vga_scaler=0, the tv doesn't show anything.

Any idea how to fix this?

Posted: **Sun Mar 21, 2021 4:22 pm**

It looks like the blue cable is not connected.

Posted: **Sun Mar 21, 2021 5:16 pm**

It is connected. But then sometimes the image is blue ish as well.

is it a faulty cable then?

Because my SOG is set to ovr, because when in auto, the tv doesn't show anything. When I set to ovr, it shows the ther eis trembling in the image on screen, also problem with the cable?

Posted: **Sun Mar 21, 2021 7:04 pm**

Could be faulty cable or IO board.

The trembling is probably because you are not using a CRT.

MiSTer FPGA Forum

Red-ish screen with component cable. How to fix?

Red-ish screen with component cable. How to fix?

Re: Red-ish screen with component cable. How to fix?

Re: Red-ish screen with component cable. How to fix?

Re: Red-ish screen with component cable. How to fix?