FLI pictures not working
- kathleen
- Top Contributor
- Posts: 421
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 243 times
- Been thanked: 138 times
FLI pictures not working
Dear all,
I've just tried to run a disk where 10 FLI pictures were supposed to be displayed after pressing a key (from "A" to "J" for the selection) then spacebar.
The disk works as it should on Vice (I tried it successfully) but with the C64 core of the Mister, it doesn't work, I mean the menu appears but no pictures at all after having selected it. The program does not crash, it simply return to the selection screen after a black screen.
The disk I wanted to run (among others) is this one : https://csdb.dk/release/?id=109005
Any help, advices will be really appreciated.
I've just tried to run a disk where 10 FLI pictures were supposed to be displayed after pressing a key (from "A" to "J" for the selection) then spacebar.
The disk works as it should on Vice (I tried it successfully) but with the C64 core of the Mister, it doesn't work, I mean the menu appears but no pictures at all after having selected it. The program does not crash, it simply return to the selection screen after a black screen.
The disk I wanted to run (among others) is this one : https://csdb.dk/release/?id=109005
Any help, advices will be really appreciated.
かすりん
- yellperil
- Posts: 25
- Joined: Mon May 25, 2020 2:08 am
- Has thanked: 2 times
- Been thanked: 5 times
- Contact:
Re: FLI pictures not working
I think the coding on that disk is just really bad. On my version of Vice I get a black screen as well.
However I noticed when prompted to press <space> if you press any <character key> once then <space> it works fine on both Vice and MiSTer.
Enjoy your pictures.
However I noticed when prompted to press <space> if you press any <character key> once then <space> it works fine on both Vice and MiSTer.
Enjoy your pictures.
- kathleen
- Top Contributor
- Posts: 421
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 243 times
- Been thanked: 138 times
Re: FLI pictures not working
Oh, thank you @yellperil, I'll try this tip, very good to know.
EDIT : I've just tried on my side and it doesn't work.
Could you please let me know which C64 core you are using ? Mine is the revision from the 2021-03-08.
And the Main Mister is the 2021-03-29, the latest I guess.
Now I'm thinking aloud, would it be possible that this issue comes due to a wrong/bad C64 config in the Mister.ini file ?
Thanks for your help.
EDIT : I've just tried on my side and it doesn't work.
Could you please let me know which C64 core you are using ? Mine is the revision from the 2021-03-08.
And the Main Mister is the 2021-03-29, the latest I guess.
Now I'm thinking aloud, would it be possible that this issue comes due to a wrong/bad C64 config in the Mister.ini file ?
Thanks for your help.
かすりん
- yellperil
- Posts: 25
- Joined: Mon May 25, 2020 2:08 am
- Has thanked: 2 times
- Been thanked: 5 times
- Contact:
Re: FLI pictures not working
I'm on the current everything. I've just run update_all to make 100% sure.
I have tried the disk you linked again and it's still working fine on my MiSTer.
I have tried the disk you linked again and it's still working fine on my MiSTer.
- tontonkaloun
- Posts: 354
- Joined: Sun May 24, 2020 7:38 pm
- Has thanked: 152 times
- Been thanked: 52 times
Re: FLI pictures not working
Hello,kathleen wrote: ↑Tue Mar 30, 2021 5:42 pm Dear all,
I've just tried to run a disk where 10 FLI pictures were supposed to be displayed after pressing a key (from "A" to "J" for the selection) then spacebar.
The disk works as it should on Vice (I tried it successfully) but with the C64 core of the Mister, it doesn't work, I mean the menu appears but no pictures at all after having selected it. The program does not crash, it simply return to the selection screen after a black screen.
The disk I wanted to run (among others) is this one : https://csdb.dk/release/?id=109005
Any help, advices will be really appreciated.
I will also try on my side
- tontonkaloun
- Posts: 354
- Joined: Sun May 24, 2020 7:38 pm
- Has thanked: 152 times
- Been thanked: 52 times
Re: FLI pictures not working
Doesn't work on my MiSTer, nor on my Ultimate64, nor on vice 3.5.
I will test on my real C64 & vice 3.1
I will test on my real C64 & vice 3.1
- kathleen
- Top Contributor
- Posts: 421
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 243 times
- Been thanked: 138 times
Re: FLI pictures not working
Thanks to both of you
@yellperil, so there is something that I do wrong. will continue to try.
@tontonkaloun, good that you also was able to reproduce the issue. Yeah, please keep us posted with your findings.
@yellperil, so there is something that I do wrong. will continue to try.
@tontonkaloun, good that you also was able to reproduce the issue. Yeah, please keep us posted with your findings.
かすりん
- yellperil
- Posts: 25
- Joined: Mon May 25, 2020 2:08 am
- Has thanked: 2 times
- Been thanked: 5 times
- Contact:
Re: FLI pictures not working
Oh . . . I think I've worked it out! . . .
Do not press space slowly . . . hit it as FAST as you can.
Do not press space slowly . . . hit it as FAST as you can.