Making the MiSTer JAMMA Compatible

[keilmillerjr]

I created JAMMA.xlsx to help you make your MiSTer JAMMA compatible and work in your arcade machine. It includes the following sheets.

• MiSTer to JAMMA

• Molex

• Part sourcing

• JAMMA

• JAMMA+

• JAMMA 19 in 1

• JAMMA MVS

• JAMMA Adapter - Antonio Villena

• JPAC - Ultimarc

• Neo Geo PCB

JAMMA.xlsx

(36.86 KiB) Downloaded 104 times

[keilmillerjr]

New JAMMA pin out sheets added. They now include accurate color codes.

[antoniovillena]

Thank you for this datasheet. It's very helpful. About my adapter there are 2 corrections:
1. Is my mistake. I use the other 12V line too but not appeared on the schematic. Now it's updated.
2. The 6p buttons for CHAMMA support are by default unconnected. The reason is because there is GND line there and this would cause continuous pulsation. Also the 6p is available on the kick harness. So for activate CHAMMA 6p button on my adapter you need to install 2 jumper caps.

[keilmillerjr]

Thanks for the clarification Antonio. I updated the spreadsheet.