socfpga_bridges_reset: FPGA not ready, aborting

Kernel, Main, Utilities & Applications, Miscellaneous Devices.
Post Reply
andrezheng
Posts: 32
Joined: Tue Aug 25, 2020 3:10 pm
Has thanked: 1 time
Been thanked: 6 times

socfpga_bridges_reset: FPGA not ready, aborting

Unread post by andrezheng »

Hello,

The U-Boot tells the below info. Has anyone met same issue? Does it mean the FPGA need encrypted configuration file or something else?

socfpga_bridges_reset: FPGA not ready, aborting

And also, the PL part can not also be detected by the Quartus II/Programmer. And the HPS core could be detected by the QUartus II/Programmer.

Thanks for sharing your opinions.
Attachments
1.jpg
1.jpg (327.06 KiB) Viewed 2231 times
Top
andrezheng
Posts: 32
Joined: Tue Aug 25, 2020 3:10 pm
Has thanked: 1 time
Been thanked: 6 times

Re: socfpga_bridges_reset: FPGA not ready, aborting

Unread post by andrezheng »

issue closed. Soldering problem.
Top
Doreen
Posts: 1
Joined: Fri Jun 18, 2021 4:08 am

Re: socfpga_bridges_reset: FPGA not ready, aborting

Unread post by Doreen »

andrezheng wrote: ↑Sun May 09, 2021 1:23 pm issue closed. Soldering problem.
Is it possible of you to describe more about "Soldering problem" , and how you killed it.
Top
Post Reply

Return to “Linux”