Page 1 of 1
FTP no longer working
Posted: Thu Jun 10, 2021 10:42 pm
by Captain FPGA
Out of the blue my FTP stopped working for Filezilla and WinSCP.
Here is the login
Username: root
Port: 22
Pass: 1
Followed by my IP address which I checked numerous times. The protocol is set to SFTP - SHH what am I missing? I know the WiFi is connected because the time zone appears correctly. Whenever I run update all script it arcs into the internet to grab files easily, finally I got it to work recently with Putty but I'm wayyyyyy less familiar with that program and that was with a lot of help from a friend.
What am I doing wrong here?
Re: FTP no longer working
Posted: Fri Jun 11, 2021 3:54 am
by C-R-T
The mister’s ip probably changed. It does that very often. Press F11 to check it, and then change it in your FileZilla settings.
Re: FTP no longer working
Posted: Fri Jun 11, 2021 3:57 am
by FoxbatStargazer
My IP's been rock steady and FTP has also failed for me, even though samba continues to work...
Re: FTP no longer working
Posted: Fri Jun 11, 2021 3:59 am
by aberu
Captain FPGA wrote: ↑Thu Jun 10, 2021 10:42 pm
Out of the blue my FTP stopped working for Filezilla and WinSCP.
Here is the login
Username: root
Port: 22
Pass: 1
Followed by my IP address which I checked numerous times. The protocol is set to SFTP - SHH what am I missing? I know the WiFi is connected because the time zone appears correctly. Whenever I run update all script it arcs into the internet to grab files easily, finally I got it to work recently with Putty but I'm wayyyyyy less familiar with that program and that was with a lot of help from a friend.
What am I doing wrong here?
Just use SCP, it's just SSH copying basically. It's built into WinSCP. Change the connection option from FTP to SCP.
Re: FTP no longer working
Posted: Fri Jun 11, 2021 7:59 am
by Captain FPGA
aberu wrote: ↑Fri Jun 11, 2021 3:59 am
Captain FPGA wrote: ↑Thu Jun 10, 2021 10:42 pm
Out of the blue my FTP stopped working for Filezilla and WinSCP.
Here is the login
Username: root
Port: 22
Pass: 1
Followed by my IP address which I checked numerous times. The protocol is set to SFTP - SHH what am I missing? I know the WiFi is connected because the time zone appears correctly. Whenever I run update all script it arcs into the internet to grab files easily, finally I got it to work recently with Putty but I'm wayyyyyy less familiar with that program and that was with a lot of help from a friend.
What am I doing wrong here?
Just use SCP, it's just SSH copying basically. It's built into WinSCP. Change the connection option from FTP to SCP.
That did the trick! You have my profound gratitude. *bowing head like a martial artist does his sensei*