MiSTer FPGA Forum

Basically I bought a multi scart adapter from otaku so it’s very good quality,

I’ve tried both my cables and I get the above, barely see the screen totally washed out.

Cables work fine on the tv directly, I thought buying a good switch would sort this but to no avail.

Appreciate some advice! I’ve tried switching the jumper from 3.3 to 5v but no difference

https://www.retrorgb.com/beware-of-mist ... ables.html

In order to do a SCART connection for MiSTer requires a resistor on the SCART line or it's not safe. I would refrain from using whatever you are using to achieve this signal chain, until you hook up a multimeter and test the resistance and voltage on the SCART line.

What cable are you using?