Case for MT32pi + Raspberry Pi 3B

[retro]

Is there a 3D printable case for MT32pi + Raspberry Pi 3B?

https://www.thingiverse.com/thing:4777179 is the closest thing I could find, but it's not designed for the Pi 3B. Does anyone have one to share?

Or point to a location where I can purchase said case?

Thank you.

[Lightwave]

I'd be interested in a solution for this as well.

I have a 3B+ that I never got around to using, and I'd like to turn it into an MT32pi.

[mikekim]

I ended up using a Makerhawk Case i had lying around (removed the 2x onboard fans)

amazon link: https://www.amazon.co.uk/MakerHawk-Rasp ... B07M7M53LT

NeMXor.jpg

GNZj7a.jpg

used a pin extender so the hat sat properly

YQpVux.jpg

I8D6Gu.jpg

6ude62.jpg

[retro]

Thanks for the recommendation

Unfortunately Makerhawk doesn't have any distributors here in Malaysia, and the Amazon UK product page doesn't ship here

Good to know that there's at least a solution out there

[retro]

IR1TtlM.jpg

Jerry-rigged this with a generic RPi 3B+ case, and some old standoffs from the Terasic DE-10 Nano.

Waiting for GPIO extensions to arrive before experimenting further with the Rpi case.

[retro]

GPIO extensions didn't work out, the MT32pi failed to respond after flashing the MT32pi logo

Definitely the extension's problems, as removing it and connecting the MT32pi back to the Raspberry Pi solved the problem

Realized I didn't need all the standoffs from the DE10 Nano either, so I have a better fit now...

ftHOBYg.jpg

Still not entirely happy as I would like an enclosure

Anyone here able to design a 3D-printable one, and share the STL?

I am willing to pay for the design

[bazza_12]

I just used a metal case i found on ebay

DSCF0400.JPG

DSCF0402.JPG

do a search for 'Ultra-thin Aluminum Alloy Metal CNC Enclosure Case Raspberry Pi 3B 2B B+UK' with postage in the uk it comes to about £20

[retro]

do a search for 'Ultra-thin Aluminum Alloy Metal CNC Enclosure Case Raspberry Pi 3B 2B B+UK' with postage in the uk it comes to about £20

I ordered this from AliExpress for $8 https://www.aliexpress.com/item/1005001936477582.html

If that doesn't work, I will go with your recommendation, since it's available locally for MYR68 (around £12)

Do the washers on the mt32pi sit flush on the case?

[bazza_12]

Do the washers on the mt32pi sit flush on the case?

there is a slight gap.. but we're talking <1mm.. not enough to be an issue.. i've had mine a year, no probs, plus you don't need any heatsinks on the pi.. cos the case acts as one.

[retro]

Bqm35eO.jpeg

hN4NHv6.jpeg

RFFETrI.jpeg

Received my copper case... fit is 99% perfect, there is still a very small 1mm gap between the MT32pi and the screws for the copper heatsink, but I can live with it.

The heatsink should be waaayyy more than enough for the MT32pi

[Snipsys]

Not really a case but this is my setup.

It's a Raspberry Pi 3B+ on the bottom with 11mm standoffs between the pi and the mt32-pi and more standoffs under the pi.

PXL_20220311_215346357.jpg

PXL_20220311_215346357.jpg

[amstan]

GPIO extensions didn't work out, the MT32pi failed to respond after flashing the MT32pi logo

Definitely the extension's problems, as removing it and connecting the MT32pi back to the Raspberry Pi solved the problem

Realized I didn't need all the standoffs from the DE10 Nano either, so I have a better fit now...

Darn, I have that same case (no cape yet though). Using it with just a few wires directly toward a de10. So if I get the same cape I'll have exactly the same problem (the need for extension).

I wonder which part of the extension is causing problems, i would be open to soldering longer pins.

[lufeig]

Slim metal case for Raspberry Pi 3B or 3B+.

Purchased on AliExpress. Link unavailable because item is out of stock.

mt32-pi fits perfectly on top of it.

Highly recommended!

680F864B-8BC7-4195-9196-EB5B10B3A123.jpeg

1BD69EC1-B17C-484F-A1B1-5E969BD8FC89.jpeg

D1846ABB-1ECA-4F39-90F8-E6819018FF14.jpeg

5D8BBFCA-C879-41E1-A4CD-CF8FD0D1BA50.jpeg

AF044509-76A9-4CB3-A106-E34D90AB6B27.jpeg

[lufeig]

This is not the seller I purchased the case from, but basically it’s the same product:

https://www.aliexpress.com/item/32872115303.html