MiSTer FPGA Forum

Hi All

I really wanna use my GunCon 2 with my Mister. I have tapped the Guncon to the Jamma edge (pin 13) and ground. I copied over the relevant files to the mister and the mister doesnt boot, just stays on static screen with no text. I did see there was an update as the today that now includes GunCon 3 support so I set everything back to normal and loaded up mister... still nothing. If I hit f10 I can't even redefine keys on the Guncon. I know the Guncon works fine, any ideas please.

GunCon 2 and Jamma? How is that?
The GunCon2 usb should be connected directly to MiSTer. And you need to get the beta files (the linux image with the guncon2 driver) for it to work.

It is connected to USB of the Mister, I'm talking about the composite side of things connecting to the jamma edge

Ok.
The F10 key should open the calibration screen even without the composite sync.
The beta zImage_dtb file is required as it contains the guncon2 usb driver.
https://github.com/NolanNicholson/GunCon2-MiSTer

If it still not works, try asking in discord on the controllers channel.